Ground-State-Based Model Reduction with Unitary Circuits

Shengtao Jiang (gbsn蒋晟韬), Steven R. White · 2025

Read Ground-State-Based Model Reduction with Unitary Circuits by Shengtao Jiang (gbsn蒋晟韬), Steven R. White (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-10774.txt.

Introduction

Shengtao Jiang and Steven White compress a hard quantum model into a simpler one that keeps its low-energy truth. Physicists routinely replace a complicated system with an effective model of its slow, cheap excitations, but the standard perturbative recipes lose accuracy. Their 2025 paper builds the replacement from the system's own ground state, using a unitary circuit learned numerically.

The circuit rotates the true ground state into a projected wave function that keeps only the low-energy degrees of freedom. Reading the transformation back out of the circuit yields the effective model directly. The testbed was the Hubbard model, in one dimension and on the two-dimensional square lattice at half filling. There the method produced spin models more accurate than the perturbative standard. The authors offer circuit-building as a general tool for model reduction.

Catalog record

CREATORShengtao Jiang (gbsn蒋晟韬), Steven R. White
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-10774

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ground-State-Based Model Reduction with Unitary Circuits Shengtao Jiang (gbsn蒋晟韬), Steven R. White Abstract We present a method to numerically obtain low-energy effective models based on a unitary transformation of the ground state. The algorithm finds a unitary circuit that transforms the ground state of the original model to a projected wavefunction with only the low-energy degrees of freedom. The effective model can then be derived using the unitary transformation encoded in the circuit. We test our method on the one-dimensional and two-dimensional square-lattice Hubbard model at half-filling, and obtain more accurate effective spin models than the standard perturbative approach. Introduction. – Obtaining low-energy effective models (LEMs) that accurately encode the low-energy physical properties of the original models is one of the central tasks in condensed matter physics. The LEMs typically have an exponentially smaller Hilbert space, which provides significant convenience for both analytical and numerical studies. Moreover, emergent interactions exhibited in LEMs can offer a clearer and more straightforward understanding of low-energy physical properties. For example, the pioneering derivation of antiferromagnetic superexchange Kramers 1934 ; Anderson 1950 provides an intuitive understanding of antiferromagnetism in Mott insulators. Nowadays in condensed matter physics, perhaps the most commonly used LEMs are various spin models reduced from electronic degrees of freedom Auerbach 2012 , which have achieved great success in describing low-energy excitations in materials Coldea et al. 2001 ; Hermele et al. 2004 . Typically, the derivation of LEMs utilizes a unitary transformation to decouple the designated low-energy sector from the remainder of the Hilbert space, often called a canonical transformation Foldy and Wouthuysen 1950 . An anti-Hermitian generator S transforms the Hamiltonian via H^{\rm eff}=e^{-S}He^{S} , which block-diagonalizes the Hamiltonian, with the low energy sector forming the LEM. When there is an energy gap separating the two sectors, which is large compared to the couplings between them, the transformation can be carried out perturbatively. One celebrated example is the Schrieffer-Wolff transformation of the Anderson model into the Kondo model Schrieffer and Wolff 1966 . Another well-known case is the Hubbard model Hubbard 1964 ; Arovas et al. 2022 ; Qin et al. 2022 : H=\sum_{\langle ij\rangle,\sigma}-tc^{\dagger}_{i\sigma}c_{j\sigma}+\sum_{i}Un_{i\uparrow}n_{i\downarrow}, (1) with \langle ij\rangle denoting nearest-neighboring sites, which can be reduced to a spin- 1/2 or t - J model in the large U/t limit by integrating out double occupancy Takahashi 1977 ; MacDonald et al. 1988 . In contrast to various types of canonical transformations Foldy and Wouthuysen 1950 ; Wegner 1994 ; White 2002 ; Knetter and Uhrig 2000 ; Chernyshev et al. 2004 ; Yanai and Chan 2006 ; Neuscamman et al. 2010 that directly transform Hamiltonians, another frequently used but less systematic approach, facilitated by the recent development of numerical simulation, derives LEMs by matching their low-energy wavefunctions with the original models Sawaya and White 2022 ; Zheng et al. 2018 ; Chang et al. 2024a ; Chang et al. 2024b . This can be useful when the canonical transformation is difficult to carry out or where it yields a large number of significant terms, provided that one only aims to match a few low-lying states instead of the whole low energy sector. For example, in one approach Sawaya and White 2022 , an effective Hamiltonian of simpler form is found that reproduces just the ground state rather than matches a spectrum. One first obtains the ground state of the original Hamiltonian, then designs an effective Hamiltonian ansatz H(\vec{\alpha}) parameterized by \vec{\alpha} , and uses multiple simulations to find the optimal \vec{\alpha} that maximizes the overlap of the new and original ground state. However, the optimization cost can be high if the ansatz contains many parameters and a large number of simulations are required. In some cases, the original Hamiltonian simulation may identify degrees of freedom as being unoccupied, allowing a very simple truncation. For example, in a recent work on the three-band Hubbard models, DMRG simulations revealed that many one-particle orbitals were almost completely unoccupied, allowing them to be truncated without the need for two-particle unitary transformations Jiang et al. 2023 . The LEM was then formed by a simple single particle rotation to the Wannier functions spanning the occupied orbitals. However, in the general case, when the higher bands have finite occupancy, or when the high-energy degrees of freedom exhibit many-body effects such as significant double occupancy, a many-body unitary transformation is required to derive LEMs. In this letter, we propose a systematic and efficient method to obtain LEMs based on a unitary transformation of the ground state. The algorithm is based on tensor networks, which finds a proper unitary circuit G made of local gates that transforms the ground state of the original model to a projected wavefunction with only low-energy degrees of freedom. The effective model can then be generated via H^{\rm eff}=GHG^{\dagger} , whose terms are local and few-body by the design of the unitary circuit. It is highly efficient since no more simulations other than obtaining the ground state of the original model is required. It is also non-perturbative and derives more accurate LEMs compared to the standard perturbative approach for intermediate coupling. The validity of the generated LEMs can be verified by simulation of its low-lying states. Figure 1: Two structures of the unitary circuits considered in this work: (a) a sequential circuit, and (b) a brick wall circuit. To find the local unitaries that transform |\psi_{0}\rangle to |\phi_{\rm P}\rangle , we optimize one unitary at a time with the others fixed and sweep through the whole circuit back and forth. The optimal individual unitary is constructed based on the environmental tensor E , which is obtained by leaving out the corresponding unitary in the contraction of the circuit with wavefunctions, as indicated in (b). (c) To optimize each unitary, one performs an SVD of the tensor E , adjusts tensor V^{\dagger} into \tilde{V^{\dagger}} and recombines with tensor U to form the optimal unitary gate. Algorithm. — The algorithm begins by using DMRG White 1992 ; White 1993 ; Fishman et al. 2022 to simulate the original Hamiltonian H^{0} to obtain its ground state |\psi_{0}\rangle . We then project out certain high-energy degrees of freedom and get |\phi_{P}\rangle=\hat{P}|\psi_{0}\rangle (with normalization). In the Hubbard model which is our main focus, we take \hat{P} as the Gutzwiller projection Gutzwiller 1963 , which projects out double occupancy. In a multi-band model, one could choose a projection operator that removes higher bands of single-particle states. The goal of the projection is to identify the target wavefunction with only the effective low energy degrees of freedom. Consider a two-site half-filled Hubbard model as an example. Its ground state is |\psi_{0}\rangle=c_{1}(|\uparrow,\downarrow\rangle-|\downarrow,\uparrow\rangle)+c_{2}(|0,\uparrow\downarrow\rangle+|\uparrow\downarrow,0\rangle) . We would like the ground state of the LEM |\phi_{P}\rangle to omit the doubly-occupied states and retain the same singlet form as the original |\psi_{0}\rangle , i.e., |\phi_{P}\rangle\sim c_{1}(|\tilde{\uparrow},\ \tilde{\downarrow}\rangle-|\tilde{\downarrow},\tilde{\uparrow}\rangle) . Therefore, |\phi_{P}\rangle is just the Gutzwiller projection of |\psi_{0}\rangle where the spins are the effective degrees of freedom. We note that the primary use of the projected state is to find an appropriate unitary transformation G satisfying G|\psi_{0}\rangle=|\phi_{P}\rangle . In particular, we are not interested in the energy of the projected state using the original Hamiltonian. The LEM is generated via H^{\rm eff}=GHG^{\dagger} , which guarantees its ground

Read the complete text