Purcell-enhanced quantum adsorption

Dennis P. Clougherty · 2025

Read Purcell-enhanced quantum adsorption by Dennis P. Clougherty (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-10410.txt.

Introduction

Dennis Clougherty studies atoms sticking to surfaces in a solo 2025 physics paper. A cold atom can settle onto a surface by releasing one vibration packet. That quantum process works only when the binding is weak. Clougherty asks how damping and surface size change the sticking rate.

A medium sized surface acts like an echo chamber for vibrations. When its tones match the sticking transition, the rate jumps up. When the tones are off, the rate falls below the standard rule. The effect mirrors how cavities boost or hush light emission in optics. Mode spacing must beat the vibration linewidth for the effect to show. The paper links surface science with a classic idea from quantum optics.

Catalog record

CREATORDennis P. Clougherty
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE13 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-10410

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Purcell-enhanced quantum adsorption Dennis P. Clougherty Abstract Cold atoms can adsorb to a surface with the emission of a single phonon when the binding energy is sufficiently small. The effects of phonon damping and adsorbent size on the adsorption rate in this quantum regime are studied using the multimode Rabi model. It is demonstrated that the adsorption rate can be either enhanced or suppressed relative to the Fermi golden rule rate, in analogy to cavity effects in the spontaneous emission rate in QED. A mesoscopic-sized adsorbent behaves as an acoustic cavity that enhances the adsorption rate when tuned to the adsorption transition frequency and suppresses the rate when detuned. This acoustic cavity effect occurs in the regime where the frequency spacing between vibrational modes exceeds the phonon linewidth. I Introduction The radiative properties of an atom can be radically altered by placing the atom in a cavity. If the cavity is tuned to an atomic transition frequency, the spontaneous emission rate can be enhanced relative to its free-space value; if the cavity is detuned from the transition frequency, spontaneous emission can be suppressed. This Purcell effect Purcell 1946 is a manifestation of the interaction of the atom with the cavity-modified electromagnetic vacuum. In solids, there is an analogous acoustic Purcell effect; e.g., a color-center in diamond can function as an excited atom, decaying with the emission of phonons (real and virtual). By placing the color center in a nanomechanical resonator tuned to the spin transition frequency, the spin relaxation rate can be enhanced Joe et al. 2025 by a factor of 10. There are a number of effects in solids that involve the emission or absorption of phonons (e.g., thermal and electric conduction, BCS superconductivity, and optical absorption and emission). The acoustic Purcell effect may well be used to shape the properties of solids by controlling interactions with phonons. Mechanical metamaterials Lee et al. 2012 where the phonon properties of the material can be manipulated may provide a way to achieve this experimentally. In this Letter, the effect of an acoustic cavity on the adsorption of a cold adsorbate is studied. Using the Dirac-Frenkel variational principle Dirac 1930 ; Frenkel 1934 , a time-dependent description of phonon-assisted quantum adsorption is formulated, and a closed-form expression for the acoustic Purcell effect on the phonon-assisted adsorption rate is obtained. The finite size of the adsorbent creates an acoustic cavity that modifies the density of vibrational modes, alters the adsorbate-phonon interaction, and consequently enhances or suppresses the adsorption rate. II Multimode quantum Rabi model The multimode quantum Rabi Hamiltonian Sundaresan et al. 2015 ; Gely et al. 2017 gives a simplified model for describing phonon-assisted quantum adsorption on a 2D adsorbent Clougherty 2024 H=H_{a}+H_{p}+H_{i} (1) where \displaystyle H_{a} \displaystyle= \displaystyle E_{c}c^{\dagger}c-E_{b}b^{\dagger}b (2) \displaystyle H_{p} \displaystyle= \displaystyle\sum_{n}\omega_{n}a^{\dagger}_{n}a_{n} (3) \displaystyle H_{i} \displaystyle= \displaystyle-g(c^{\dagger}b+b^{\dagger}c)\sum_{n}(a^{\dagger}_{n}+a_{n}) (4) The model considers two states of the adsorbate: the first is the initial state of the adsorbate in the gas phase with energy E_{c} ; the second is the adsorbate bound to the surface with energy -E_{b} . c^{\dagger} ( c ) creates (annihilates) an adsorbate in the gas phase, while b^{\dagger} ( b ) creates (annihilates) an adsorbate bound to the surface. a_{n}^{\dagger} ( a_{n} ) creates (annihilates) a phonon in the nth mode. Adsorption occurs by displacement of the adsorbent which is assumed to be an elastic membrane under tension. The coupling constant g is a matrix element of the normal derivative of the static surface potential, as described in Ref. Clougherty 2014 . For cold adsorbates, g varies as the square root of the adsorbate energy in the gas phase Sengupta and Clougherty 2018 and can be experimentally controlled Yu et al. 1993 . The adsorbent is taken to be a disk of radius a that is clamped at its edge, creating an acoustic resonator. The vibrational spectrum of circularly symmetric modes is taken to be \omega_{n}=c\pi n/a ( n=1\dots N ) where c is the transverse speed of sound. Resonators of this type have been fabricated by suspending graphene over pores on the surface of a SiO 2 substrate Bunch et al. 2008 using mechanical exfoliation. III Variational ansatz Following Ref. Clougherty 2024 , a time-dependent description of the adsorption dynamics can be formulated with the application of the Dirac-Frenkel variational principle Dirac 1930 ; Frenkel 1934 . A time-dependent variational state that describes the fundamental adsorption process is chosen, and an effective Lagrangian is obtained for the system. Time-dependent amplitudes in the variational state serve as generalized coordinates. Equations of motion for the variational amplitudes follow from the Euler-Lagrange equations for the effective Lagrangian. The equations of motion can be subsequently solved using integral transform methods. The variational state of the system is taken to be a superposition of two types of states: the initial state of the adsorbate of energy E_{c} with a thermal distribution of phonons supported on the adsorbent; and secondly, the adsorbate bound to the adsorbent with an additional phonon present. |\psi(t)\rangle=\bigg(C(t)c^{\dagger}+\sum_{m}B_{m}(t)a_{m}^{\dagger}b^{\dagger}\bigg)|{\rm\{n_{q}\}}\rangle (5) where |{\rm\{n_{q}\}}\rangle=\prod_{q}\frac{(a_{q}^{\dagger})^{n_{q}}}{\sqrt{n_{q}!}}|0\rangle . C(t) and the set of B_{n}(t) are taken to be variational functions. The effective Lagrangian in the Dirac-Frenkel approach is given by L=\langle\psi(t)|(i(\frac{d}{dt}-H)|\psi(t)\rangle (6) For the variational ansatz in Eq. 5 , the following Lagrangian results after thermal-averaging the phonon matrix elements \displaystyle L \displaystyle= \displaystyle iC^{*}\frac{dC}{dt}+i\sum_{p}(n_{p}+1)B_{p}^{*}\frac{dB_{p}}{dt}-(E_{c}+\sum_{m}n_{m}\omega_{m})C^{*}C (7) \displaystyle+ \displaystyle\sum_{m}B_{m}^{*}B_{m}(n_{m}+1)(E_{b}-\sum_{p}n_{p}\omega_{p})+g\sum_{m}(C^{*}B_{m}+B_{m}^{*}C)(n_{m}+1) where n_{m}={1/(\exp(\omega_{m}/T)-1)} , the initial thermal distribution (mode m ) of phonons in the adsorbent. The Euler-Lagrange equations for this Lagrangian are \displaystyle i\frac{dC}{dt} \displaystyle= \displaystyle(E_{c}+\sum_{p}n_{p}\omega_{p})C-{g}\sum_{m}(n_{m}+1)B_{m} (8) \displaystyle i\frac{dB_{n}}{dt} \displaystyle= \displaystyle-(E_{b}-\omega_{n}-\sum_{p}n_{p}\omega_{p})B_{n}-{g}C (9) The dynamics is found in the solution of this set of coupled linear first-order equations for the variational functions subject to the initial conditions that the adsorbate starts in the gas phase at t=0 ( C(0)=1 and B_{n}(0)=0 ). Eqs. 8 and 9 can be solved analytically with Laplace transforms; for example, the Laplace-transformed amplitude for the entrance channel {\tilde{C}(s)} is {\tilde{C}(s)}={\frac{i}{is-E_{c}-\sum_{p}n_{p}\omega_{p}-g^{2}\sum_{p}\frac{n_{p}+1}{is+E_{b}-\omega_{p}-\sum_{m}n_{m}\omega_{m}}}} (10) The time-dependent amplitudes C(t) , B_{m}(t) can be obtained by inverse transforming using the Bromwich contour in the complex s-plane. The poles of {\tilde{C}(s)} are N+1 solutions to is_{n}-E_{c}-\sum_{p}n_{p}\omega_{p}-g^{2}\Sigma(is_{n})=0 (11) where \Sigma(is)=\sum_{p}\frac{n_{p}+1}{is+E_{b}-\omega_{p}-\sum_{m}n_{m}\omega_{m}} (12) IV Adsorption rate The adsorption rate may be obtained from the adsorbate self-energy using R\approx-2g^{2}\ {\rm Im}\ \Sigma(E) (13) where E=E_{c}+\sum_{p}n_{p}\omega_{p} , the initial energy of the system. In the absence of phonon damping, there is no true adsorption for a finite-size adsorbent and R=0 . There are only two possibilities for the adsorbate: prompt elastic scattering back to the gas phase or the excitation of a resonance Clougherty and Kohn 1992 that decays back to the gas phase after a time delay. For a suitably large number of modes, the sum implicit in Eq. 13 may be replaced by an integral over phonon frequency \omega in the quasicontinuum approximation R_{0}\approx-2g^{2}\ {\rm Im}\ \int_{0}^{\omega_{D}}d\omega{\cal D}_{0}\frac{n(\omega)+1}{E_{c}+E_{b}-\omega} (14) {\cal D}_{0} is the vibrational density of circularly symmetric modes. This integral as it stands is ambiguous, as a singularity lies on the integration path; however, the inevitable clamping loss that damps the phonons suggests that physically the phonon frequencies must acquire a small imaginary part \omega\to\omega-i\eta . This resolves the integral ambiguity and gives the following adsorption rate in the limit \eta\to 0^{+} R_{0}=2\pi g^{2}{\cal D}_{0}{(n(\Omega_{s})+1)}\Theta(\omega_{D}-\Omega_{s}) (15) where \Omega_{s}=E_{c}+E_{b} , \omega_{D}

Read the complete text