MIPS is Maxwell-like fluid with an extended and non-monotonic crossover

José Martín-Roca, Kristian Thijssen, Tyler Shendruk, Angelo Cacciuto, Chantal Valeriani · 2025

Read MIPS is Maxwell-like fluid with an extended and non-monotonic crossover by José Martín-Roca, Kristian Thijssen, Tyler Shendruk, Angelo Cacciuto, Chantal Valeriani (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-10332.txt.

Introduction

Jose Martin-Roca and co-authors measure how a crowd of self-moving particles flows when it splits into dense and thin zones, in a 2025 study. The particles swim or crawl on their own, and their clumping has no match in still matter. How such a clumped fluid bends and flows under force was poorly known.

Under steady and wobbling push, the mix acted like a springy fluid that thins as it is sheared. Oddly, the point where spring-like and flow-like behavior cross rose with activity before clumping, then fell after it. The finding shows how self-driven force reshapes the feel of a fluid in ways that matter for new materials.

Catalog record

CREATORJosé Martín-Roca, Kristian Thijssen, Tyler Shendruk, Angelo Cacciuto, Chantal Valeriani
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-10332

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

MIPS is Maxwell-like fluid with an extended and non-monotonic crossover José Martín-Roca, Kristian Thijssen, Tyler Shendruk, Angelo Cacciuto, Chantal Valeriani Abstract Understanding the mechanical properties of active suspensions is crucial for their potential applications in materials engineering. Among active phenomena with no analogue in equilibrium systems, motility-induced phase separation (MIPS) in active colloidal suspensions is one of the most extensively studied. However, the mechanical properties of MIPS remain poorly understood. This study investigates the rheology of a suspension of active colloidal particles under constant and oscillatory shear. Systems consisting of pseudo-hard active Brownian particles exhibiting co-existence of dense and dilute phases behave as a viscoelastic Maxwell-like fluid at low and high frequencies, displaying exclusively shear thinning across a wide range of densities and activities. Remarkably, the crossover frequency between the storage and loss moduli is non-monotonic, increasing with activity before the MIPS transition but decreasing with activity after the transition, in contrast to a passive analog system of attractive particles in liquid-gas phase coexistence, revealing the subtleties of how active forces and intrinsically out-of-equilibrium phases affect the mechanical properties. Active materials, composed of self-propelled units that consume energy to generate motion, display a variety of fascinating properties that deviate from those of systems at equilibrium [ 1 , 2 ] , including large correlated motion [ 3 , 4 ] , anomalous transport [ 5 , 6 , 7 , 8 , 9 ] , and emergent self-organization [ 10 , 8 , 11 , 12 ] . Motility-Induced Phase Separation (MIPS), where a solution of motile particles separates into co-existing dense and dilute regions without attractive interactions, is a textbook example of behavior exclusive to active systems [ 13 ] that has been the subject of intense scrutiny [ 14 , 15 , 16 , 17 , 18 , 19 ] . This is because active Brownian particles (ABP) represent the simplest active model with a well-defined interplay between thermal, dispersion and active forces [ 20 ] . The intrinsically out-of-equilibrium nature of these self-organized structures implies that traditional approaches and even definitions that are workhorses in equilibrium statistical mechanics must be applied with care. A striking example is the use of conflicting definitions of surface tension to study MIPS interfaces [ 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 ] . Despite standing as a fundamental state of active matter, the mechanical properties of the MIPS phase remain poorly understood, especially its response to external driving forces. Much of the work on externally driven ABPs has focused on dense or crystalline suspensions in which activity fluidizes otherwise "jammed" systems [ 31 ] , inducing either shear thinning [ 32 ] or thickening [ 33 ] depending on particle softness. In contrast, the rheological properties of dilute ABPs, where activity drives large-scale density variations through MIPS [ 13 ] , is largely unexplored. Crucially, while MIPS is often described as a liquid-gas phase separation due to its mathematical analogy with equilibrium systems [ 34 ] , a significant degree of local crystalline order is detectable within the dense phase [ 13 ] . The translational symmetry breaking suggests that the dense phase is more akin to a solid crystal than a liquid droplet. This apparent paradox raises key questions about the rheological nature of such systems, since broken symmetries generally result in elasticity — at least in passive materials. Traditionally, the rheological properties of passive systems arise from a thermal relaxation in response to external driving. However, active materials possess intrinsically out-of-equilibrium pathways by which emergent phenomena and novel behaviors can arise in response to driving forces, such as super-fluid like behavior [ 35 ] , the emergence of higher-order defects [ 36 ] , non-linear Darcy’s law [ 37 , 38 ] and negative drag [ 39 ] . While active matter holds promise for developing exciting materials with unusual mechanical properties, understanding how these materials respond to external driving forces is key to comprehending and designing their mechanical behavior. Studying the rheology of the MIPS phase is a first fundamental step in this direction. In this work, we study the rheological behavior of a suspension of pseudo-hard ABPs across the MIPS transition using numerical simulations. Specifically, we measure the rheology of this system in its homogeneous fluid state, and in the phase separated (MIPS) state, which accounts for the simultaneous presence of the low density gas and the high density condensate. We consider both oscillatory and steady shear, and show the rheological response is akin to a Maxwell-like fluid at low and high frequencies, but has an extended crossover regime at intermediate frequencies. In contrast with the monotonic behavior observed in the storage/loss moduli crossover frequency for passive attractive systems, we discover that the crossover point is non-monotonic with activity since the timescale switches from one associated with thermal processes to one associated with active motion. Figure 1: Storage moduli G^{\prime} (closed circles) and loss moduli G^{\prime\prime} (open squares) with oscillation amplitude A_{x}/L_{y}=5\% (SAOS regime) for \rho=0.5 and different activities \text{Pe}_{\text{a}}=0 (blue), 42 (green) and 120 (red). Dashed and straight lines are visual guides to show the expected Maxwell scaling of \omega^{1} and \omega^{2} . We perform Brownian dynamics simulations of ABP of diameter d in two dimensions with translation diffusion D_{\text{T}} and rotation diffusion D_{\text{R}}=3D_{\text{T}}/d^{2} . The self-propulsion speed can be imagined as due to an active force of strength F_{a}=\zeta\,v_{0} . The excluded volume interaction between the particles is enforced via the pairwise pseudo-hard sphere potential [ 40 ] . We resolve the equations of motion using LAMMPS [ 41 ] (see SI). The number density is \rho=0.5 , unless otherwise stated. We impose shear through Lees–Edwards boundary conditions, which ensure that shear strain is transmitted homogeneously throughout the system. When a strain \gamma with strain rate \dot{\gamma} is applied to the active system (see SI), the dynamics of individual particles are governed by two dimensionless numbers \text{Pe}_{\text{s}} and \text{Pe}_{\text{a}} [ 33 ] . The shear Péclet number, \text{Pe}_{\text{s}}=\frac{\dot{\gamma}\,d^{2}}{D_{\text{T}}} , provides information about the relevance of the imposed shear rate with respect to thermal fluctuations, while the Active Péclet number, \text{Pe}_{\text{a}}=\frac{3v_{0}}{D_{\text{R}}d} , measures the ratio between the orientation decorrelation time \tau_{R}=1/D_{\text{R}} and self-propulsion time \tau_{\text{a}}=d/v_{0} . If the amplitude of the applied deformation is sufficiently small, the system responds linearly with stress (see SI) proportional to strain, \gamma(t)=(A_{x}/L_{y})\,\sin(\omega\,t) and strain rate, \dot{\gamma}(t)=(A_{x}\omega/L_{y})\,\cos(\omega\,t) , where \omega is the frequency of the oscillatory shear. In this regime, only the first-order natural modes of the system are excited [ 42 , 43 ] , and the stress response is \sigma_{xy}(t)=G^{\prime}\gamma(t)+G^{\prime\prime}\dot{\gamma}(t)/\omega , where G^{\prime} and G^{\prime\prime} are the storage and loss moduli, respectively. To ensure a linear response, a fixed-frequency amplitude sweep is performed across a broad range of frequencies (SI [ 44 ] ). Figure 1 shows the interplay between the elastic and viscous responses for different values of \text{Pe}_{\text{a}} , below (blue), above (red) and at (green) the MIPS transition (see SI [ 44 ] ). Interestingly, regardless of \text{Pe}_{\text{a}} , the system shows a liquid-like response (G^{\prime\prime}>G^{\prime}) at low frequencies (small \text{Pe}_{\text{s}} ). While this is expected for passive systems characterized by a single low

Read the complete text