Zero-energy Edge States of Tight-Binding Models for Generalized Honeycomb-Structured Materials
Borui Miao, Yi Zhu · 2025
Read Zero-energy Edge States of Tight-Binding Models for Generalized Honeycomb-Structured Materials by Borui Miao, Yi Zhu (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-09565.txt.
Introduction
Borui Miao and Yi Zhu pin down when zero-energy edge states appear in generalized honeycomb materials, in work from 2025. Tight-binding models of these lattices admit two seam types, likened to the zigzag and armchair edges of graphene. The authors derive exact necessary and sufficient conditions on the hopping strengths for such states to exist at each seam.
One seam type hosts its pair of states only between topologically distinct materials. The other allows them even between identical materials, given the right hopping pattern, and the two energy curves cross strictly. Simulated wave packets running along bent seams confirm the protected motion expected of these spin-like states.
Catalog record
| CREATOR | Borui Miao, Yi Zhu |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 104 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-09565
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Zero-energy Edge States of Tight-Binding Models for Generalized Honeycomb-Structured Materials Borui Miao, Yi Zhu Abstract Generalized honeycomb-structured materials have received increasing attention due to their novel topological properties. In this article, we investigate zero-energy edge states in tight-binding models for such materials with two different interface configurations: type-I and type-II, which are analogous to zigzag and armchair interfaces in the honeycomb structure. We obtain the necessary and sufficient conditions for the existence of such edge states and rigorously prove the existence of paired zero-energy edge states. More specifically, type-II interfaces support two zero-energy states exclusively between topologically distinct materials. For type-I interfaces, zero-energy edge states exist between both topologically distinct and identical materials when hopping coefficients satisfy specific constraints. We further prove that the two energy curves for edge states exhibit a strict crossing. Numerical simulations are presented to demonstrate that wave packets associated with these edge states remain localized near the interface and can be chosen to propagate in either direction, reflecting the pairing of the two edge modes. MSC Classification]35C20, 35P05, 35Q40, 35Q41, 35Q60 keywords generalized honeycomb-structured materials, tight-binding models, zero-energy edge states, bidirectional waveguide pacs [ 1 Introduction and Summary of Results 1.1 Introduction Owing to their novel physical properties and potential applications, topological materials have attracted considerable attention from researchers in condensed matter physics and quantum mechanics. One of their key features is topologically protected edge states localized near the interface between two topologically distinct materials Shockley (1939) ; Kane and Mele (2005) ; Hasan and Kane (2010) ; Rechtsman et al. (2013) . Specifically, the interface between two gapped materials with different topological indices gives rise to localized edge states in the band gap. Topological concepts can also be generalized to describe edge states in various physical systems, such as magnetic systems Ablowitz and Cole (2020) ; Shapiro and Weinstein (2022) , non-linear systems Ablowitz and Cole (2017) ; Ablowitz and Cole (2019) and non-Hermitian systems Ammari et al. (2024b) ; Ammari et al. (2024a) . A typical system that supports edge states is the 2D honeycomb structure. Its novel properties are related to the conical intersection in the dispersion surfaces, known as the Dirac point Wallace (1947) ; Neto et al. (2009) ; Fefferman and Weinstein (2012) ; Ammari et al. (2020a) . A rigorous characterization of these properties was first provided in the pioneering work of Fefferman and Weinstein Fefferman and Weinstein (2012) . Following the framework, the existence of a Dirac point can be extended to general elliptic operators with honeycomb structures Lee-Thorp et al. (2018) . Ammari and his collaborators also proved similar results for materials in the subwavelength regime by applying layer potential methods to Helmholtz systems Ammari et al. (2018) ; Ammari et al. (2020a) ; Ammari et al. (2020b) . In honeycomb structures, a band gap can be created by breaking the inversion symmetry Neto et al. (2009) ; Schaibley et al. (2016) ; Xiao et al. (2007) . Recently, generalized honeycomb-structured materials Wu and Hu (2015) ; Yves et al. (2017) have been shown to support the existence of a double Dirac point at the center of the Brillouin zone \Gamma Miao and Zhu (2024) ; Cao and Zhu (2023) . A band gap can also be opened by contracting or dilating the inclusions. The band inversion at \Gamma is commonly regarded as a signature of a topological transition in the local model obtained from perturbations near \Gamma ; see Wu and Hu (2015) . However, the precise definition of a bulk topological invariant is more subtle and remains under discussion Palmer and Giannini (2021) ; Xu et al. (2023) . In this work, we therefore focus on a direct spectral analysis of the corresponding tight-binding Hamiltonians. To generate edge states in honeycomb structures, domain wall modulation or sharp termination at the interface between two topologically distinct materials can be employed Lee-Thorp et al. (2016) ; Xia et al. (2023) . The rigorous characterization of the existence of edge states for domain wall modulation was first provided by Fefferman et al. (2016) . It has also been verified that the edge or interface configuration determines the existence of edge states Drouot and Weinstein (2020) ; Fefferman et al. (2022) ; Fefferman et al. (2023) . However, analysis of continuous systems remains challenging, especially for sharply-terminated materials that are frequently used in photonics. Therefore, physicists adopt tight-binding approximations that reduce the continuum models to discrete models to obtain insights into the edge states Fefferman et al. (2017) ; Fefferman and Weinstein (2020) ; Ammari et al. (2022) . In Fefferman et al. (2023) , the authors proved mathematically that flat-band edge states arise for a zigzag-type edge but disappear for an armchair-type edge in tight-binding models. The existence of edge states in generalized honeycomb materials remains largely unexplored, with only a few existing studies addressing this issue Cao and Zhu (2025) . In this article, we investigate the existence of zero-energy edge states in tight-binding models for generalized honeycomb-structured materials with different interface configurations. Specifically, we study the zigzag and armchair interfaces, which will be called type-I and type-II interfaces, respectively. With the Floquet-Bloch transform, we seek to determine the point spectrum of an infinite discrete Hamiltonian operator with quasi-momentum k . We obtain results on: 1. The existence of a pair of zero-energy edge states at k=0 . For the type-I interface, zero-energy edge states may occur between either topologically distinct or identical materials when the parameters satisfy specific conditions. For the type-II interface, they occur only between topologically distinct materials. 2. The local behavior near k=0 given the existence of zero-energy edge states. The point spectrum of the corresponding Hamiltonian operators strictly crosses at k=0 . This result is valid for both types of interfaces. These results provide insights into the dynamical behavior of wave packets; see Fefferman and Weinstein (2013) ; Watson and Weinstein (2018) ; Lee-Thorp et al. (2018) . Additionally, we numerically simulate the wave packet dynamics at the interfaces. 1.2 Main Results We give a brief summary of the results presented in this article. Specifically, we establish the following results for type-I and type-II interfaces, respectively. (1) Existence and characterization of zero-energy edge states : In Theorem 4 and Theorem 9 , we provide the necessary and sufficient conditions for the existence of a two-fold eigenvalue for the Hamiltonian operators \widehat{H}_{\mathrm{I}}(0),\widehat{H}_{\mathrm{II}}(0) , respectively. For \widehat{H}_{\mathrm{I}}(0) , Theorem 4 shows that the zero-energy edge states do not generally exist. However, it also demonstrates that zero-energy edge states can exist at interfaces between both topologically distinct and identical materials. Given the existence of zero-energy edge states, the operator \widehat{H}_{\mathrm{I}}(0) has two linearly independent edge states, as characterized in Theorem 4 . For \widehat{H}_{\mathrm{II}}(0) , Theorem 9 establishes that zero-energy edge states always exist at the interface between two topologically distinct materials but do not arise at the interface between two topologically identical materials. When zero-energy edge states exist, the operator \widehat{H}_{\mathrm{II}}(0) likewise possesses two linearly independent edge states; see Theorem 9 . We numerically compute the spectra of \widehat{H}_{\mathrm{I}}(k) and \widehat{H}_{\mathrm{II}}(k) ; see Figure 3 , Figure 4 , and Figure 5 . (2) Local behavior of E_{\mathrm{I}}(k) and E_{\mathrm{II}}(k) near k=0 : In