Calculation of Elastic Constants of UO 2 using the Hubbard-Corrected Density-Functional Theory DFT+U

Mahmoud Payami, Samira Sheykhi, Mohammad-Reza Basaadat · 2025

Read Calculation of Elastic Constants of UO 2 using the Hubbard-Corrected Density-Functional Theory DFT+U by Mahmoud Payami, Samira Sheykhi, Mohammad-Reza Basaadat (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-08468.txt.

Introduction

Mahmoud Payami, Samira Sheykhi, and Mohammad-Reza Basaadat, writing in 2025, study uranium dioxide, the fuel used in light water nuclear reactors. Radiation hits the fuel over time and builds up defects. Those defects change the inner structure, cause strain, and can make the fuel swell and harm its cladding.

The authors use a corrected form of density functional theory to work out the elastic constants of a single crystal. They then compare those values with lab data. With three standard averaging models, they also estimate how fresh fuel made of many small crystals would behave. Theory and lab results agree well, they report.

Catalog record

CREATORMahmoud Payami, Samira Sheykhi, Mohammad-Reza Basaadat
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE19 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-08468

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Calculation of Elastic Constants of UO 2 using the Hubbard-Corrected Density-Functional Theory DFT+U Mahmoud Payami, Samira Sheykhi, Mohammad-Reza Basaadat Abstract Uranium dioxide which is used as a fuel in light water nuclear reactors, is continually exposed to radiation damage originated from the collision of high-energy particles. Accumulation of the resulting defects gives rise to the evolution in the micro-structure of the fuel which in turn brings about local tensions and strains in the fuel. One of the after effects due to evolution of micro-structure is the swelling of fuel which can damage the fuel cladding and cause environmental contamination by leakage of radioactive particles. Hence, it is vital to continually monitor the evolution of micro-structure and to analyze the changes in mechanical properties of the fuel. The study of elastic constants and analysis of their behavior is very helpful in understanding the mechanical properties of the fuel. In this research, using the Hubbard-corrected first-principles density- functional theory method, we have calculated the elastic constants of the uranium dioxide single crystal and compared the results with existing experimental data. In addition, using the Voigt, Reuss, and Hill models, we have estimated the mechanical properties for the poly-crystalline fresh fuel. The results show a very good agreement between the theory and experiment. Accordingly, we can reliably extend our method of calculations to the complicated system of irradiated fuel pellet, which is in the form of a poly-crystal and hosts various defects. I Introduction UO 2 Crystal UO 2 is used for years as a fuel with excellent performance in light water nuclear power reactors. The uranium dioxide crystal can be described with good accuracy using the cubic Fm\bar{3}m space group (space group number 225) with a lattice constant 5.47Å, as shown in Fig. 1 . Experimental investigations have revealed that UO 2 possesses an anti-ferromagnetic (AFM) crystal structure with a 3k-order at temperatures below 30~ K; para-magnetic form at higher T . Figure 1 : UO 2 crystal structure at low temperatures with cubic space group Fm\bar{3}m (No. 225) with lattice constant of 5.47 Å. Large grey and small red balls represent uranium and oxygen atoms, respectively. Extensive studies has shown that UO 2 is exceptionally resistant to radiation damage. However, due to persistent irradiation by high-energy particles or nuclear fission, crystal defects are created. The accumulation of defects lead to micro-structure changes in the fuel. Studies with swift heavy ion irradiation with energies about 70 MeV to 1 GeV, which mimic the radiation damage, were extensively performed wiss97 ; costantini07 ; thome09 in order to increase the understandings about radiation damage mechanisms. These experiments has shown that micro-structure changes lead to crystal lattice expansions and swelling of the fuel. tracy15 ; costantini-jap07 These processes lead to local stresses in the fuel which in turn give rise to local strains and thereof changes in the mechanical properties of the fuel. Therefore, the study of mechanical properties of the fuel finds itself as one of the most important topic in the field of nuclear materials. To investigate the mechanical properties of a material, usually the elastic constants and some derived quantities are analyzed. In this work, we have calculated the elastic constants and some derived quantities of UO 2 using the Hubbard-corrected density-functional theory, DFT+U payami-sheikhi23 ; payami24 . The results are in good agreement with experiment. DFT+U Method In the DFT hohenberg1964 ; kohn1965self study of systems with highly correlated electrons, it has been shown that employing the local density (LDA) and generalized gradient (GGA) approximations for the exchange-correlation (XC), result in large self-interaction errors (SIE). The SIE lead to large delocalization of d and f orbitals which in turn result in the incorrect metallic behavior for Mott insulators. The relatively low-cost workaround for SIE is using the Hubbard model to correct the correlation energies of localized orbitals in the DFT energy functional. In this approach, which is called DFT+U, the energy functional is given by payami-sheikhi23 ; payami24 E_{\rm DFT+U}=E_{\rm DFT}[n({\bf r})]+E_{\rm Hub}[{n_{m}^{I\sigma}}]-E_{\rm dc}[n^{I\sigma}], (1) in which n({\bf r}) is electron density, n_{m}^{I\sigma} are occupation numbers of orbitals of atom at lattice site {\bf R}_{I} , and n^{I\sigma}=\sum_{m}n_{m}^{I\sigma} . The last term in right hand side of Eq. ( 1 ) is added to avoid double counting of interactions contained in the first and second terms. The simplified rotationally invariant form of the correction is given by: E_{\rm U}[{n_{mm^{\prime}}^{I\sigma}}]\equiv E_{\rm Hub}-E_{\rm dc}=\sum_{I,\sigma}\frac{U^{I}}{2}{\rm Tr[{\bf n}^{\it I\sigma}({\bf 1}-{\bf n}^{\it I\sigma}})], (2) in which {\bf n}^{I\sigma} is the atomic occupation matrix. This correction, which is on-site correction, significantly improves the incorrect prediction of metallic behavior of Mott insulators and leads to correct prediction of insulator properties. The coefficients U^{I} are called Hubbard on-site parameters. For a known material, these parameters may be empirically so tuned that the calculations give results in agreement with some experimental data and then, employing the tuned model, one is able to predict unknown other properties of that material. In this work, using DFT+U, the elastic constants and some derived quantities has been calculated and shown to be in good agreement with experiment. II Computational details DFT+U Calculations The crystal structure of uranium dioxide is described with a cubic unit cell having 12 basis atoms as shown in Fig. 1 . To setup anti-ferromagnetic (AFM) structure for U atoms, we used the simple model in which the planes of U atoms alternate their spins when moving in z direction, i.e., a 1-dimensional AFM. For the electron-ion interactions we have used scalar-relativistic ultra-soft pseudo-potentials (USPP) with PBEsol approximation for the XC. The valence configurations U( 6s^{2},\,6p^{6},\,7s^{2},\,7p^{0},\,6d^{1},\,5f^{3} ) and O( 2s^{2},\,2p^{4} ) were used in the USPP generation. All DFT+U calculations were based on the solution of the KS equations using the Quantum-ESPRESSO (QE) code package qe-2009 ; qe-2020 . Kinetic energy cutoffs for the plane-wave expansions were chosen as 90 and 720 Ry for the wave-functions and densities, respectively. The smearing method of Marzari-Vanderbilt for the occupations with a width of 0.01 Ry were used. For the Brillouin-zone integrations of geometry optimizations, a 6\times 6\times 6 grid were used; All geometries were fully optimized for total residual pressures on unit cells to within 0.5 kbar, and residual forces on atoms to within 10 -3 mRy/a.u. For Hubbard orbitals, we have used the atomic projection operators for the expansion of KS orbitals. The value of Hubbard parameter for the 5f orbital of uranium atoms is set to 2.45 eV payami23 which gives the lattice constant of optimized structure equal to the experimental value 5.47Å. Elastic Constants Calculations To calculate the elastic constants, we first fully optimize the geometry so that the forces on atoms and stress on crystal lattice vanish to a good accuracy. Then, we apply certain changes on the lattice vectors to make system strained and let the atoms relax to their new equilibrium positions. Now, for the strained system we calculate the stress tensor. Finally, having the stress and strain tensors at hand, we calculate the elastic constants. The second-rank stress and strain tensors, which are denoted respectively by \sigma and \varepsilon , are related with a fourth-rank tensor as nye85 : \sigma_{ij}=\sum_{kl}C_{ijkl}\varepsilon_{kl}, (3) in which i,j,k,l=x,y,z are Cartesian coordinates. Both stress and strain tensors are symmetric and in

Read the complete text