Successive Jump and Mode Decomposition
1 st Mojtaba Nazari, 2 nd Anders Rosendal Korshøj, 3 rd Naveed ur Rehman · 2025
Read Successive Jump and Mode Decomposition by 1 st Mojtaba Nazari, 2 nd Anders Rosendal Korshøj, 3 rd Naveed ur Rehman (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-08453.txt.
Introduction
Mojtaba Nazari, Anders Korshøj, and Naveed ur Rehman propose a 2025 method for splitting messy signals into waves and jumps. The catalog title and author field carry clutter, so both follow the head of the text. Real signals mix smooth oscillations with sudden jumps, and older tools treat the two apart, often needing the count of parts in advance.
Their successive method peels off one piece at a time, handling waves and jumps jointly with no preset count. A twin version serves multi-channel signals. On made-up and real data, the pair beat the best rivals on both accuracy and speed, the authors report. The method is fully data-driven, needing no hand-set structure.
Catalog record
| CREATOR | 1 st Mojtaba Nazari, 2 nd Anders Rosendal Korshøj, 3 rd Naveed ur Rehman |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 26 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-08453
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Successive Jump and Mode Decomposition Thanks: This work was supported by IRRAS USA Inc., San Diego, CA 92130 US. 1 st Mojtaba Nazari, 2 nd Anders Rosendal Korshøj, 3 rd Naveed ur Rehman Abstract We propose fully data-driven variational methods, termed successive jump and mode decomposition (SJMD) and its multivariate extension, successive multivariate jump and mode decomposition (SMJMD), for successively decomposing nonstationary signals into amplitude- and frequency-modulated (AM-FM) oscillations and jump components. Unlike existing methods that treat oscillatory modes and jump discontinuities separately and often require prior knowledge of the number of components ( K K )—which is difficult to obtain in practice—our approaches employ successive optimization-based schemes that jointly handle AM-FM oscillations and jump discontinuities without the need to predefine K K . Empirical evaluations on synthetic and real-world datasets demonstrate that the proposed algorithms offer superior accuracy and computational efficiency compared to state-of-the-art methods. I Introduction Nonstationary signal decomposition methods are crucial for extracting inherent bandlimited components from complex signals. Classically, Empirical Mode Decomposition (EMD) and Variational Mode Decomposition (VMD), focus on amplitude- and frequency-modulated (AM-FM) components [ 1 , 2 ] and are widely used in various applications [ 3 , 4 ] . However, these methods primarily target oscillatory components and struggle in scenarios with trends, oscillations, and jumps, often mistakenly modeling jumps as oscillations [ 5 ] . Filtering techniques also face challenges in separating jumps due to their wideband spectral impact, complicating the isolation of meaningful signal components. To address these challenges, a class of algorithms has been developed to handle jumps and noise more effectively [ 6 , 7 , 8 ] . For instance, [ 6 ] introduces the \ell_{1} trend filtering method, a variant of Hodrick–Prescott filtering, for estimating piecewise linear trends. Inverse Potts energy functionals [ 7 ] include further advancements that recover jump-sparse and sparse signals using non-convex sparse regularizers (i.e., \ell_{0} pseudonorm-based penalty). Researchers proposed the Jumps, Oscillations, and Trends (JOT) model to decompose signals into three components [ 8 , 9 ] . The JOT method effectively separates signal components without artifacts, making it suitable for preprocessing. Despite this, JOT treats all oscillations as a single component, struggling to obtain AM-FM oscillatory components. Additionally, JOT’s two-stage process has many input parameters, making tuning complex, especially when combined with other AM-FM mode decomposition methods such as SVMD. Jump Plus AM-FM Mode Decomposition (JMD) was recently proposed for the joint extraction of jump discontinuities and amplitude- and frequency-modulated (AM-FM) modes [ 10 ] . JMD formulates an optimization problem that is simultaneously solved for K AM-FM modes and a jump component using two distinct priors: one for narrowband constraints on AM-FM modes and another for minimizing jump discontinuities. While JMD provides a robust alternating direction method of multipliers (ADMM)-based solution with fewer input parameters and a faster convergence rate than existing methods, it is computationally intensive and requires prior knowledge of K . To overcome these limitations, we introduce Successive Jump and Mode Decomposition (SJMD) and its multivariate extension Successive Multivariate Jump and Mode Decomposition (SMJMD), which decompose a nonstationary signal into a jump component v(t) and K oscillatory (AM-FM) modes u_{k}(t) using a successive approach. Their optimization framework incorporate three priors: enforcing band-limited AM-FM modes, maximizing separation between residuals and extracted modes, and minimizing a function of the jump component’s derivative. Unlike JMD, our methods do not require prior knowledge of K , offering a more flexible and adaptive decomposition with a higher likelihood of convergence, reduced computational complexity, and enhanced robustness against noise. The remainder of this paper is organized as follows: Section II presents the proposed formulation and methodology, Section III details experimental evaluations on synthetic and real-world signals, and Section IV provides concluding remarks. II Successive Jump and Mode Decomposition In this section, we propose a variational SJMD model to extract AM-FM modes u_{k}(t) and the jump component v(t) from the input signal s(t) , based on the model: s(t)=v(t)+u_{k}(t)+r(t) , where r=(\sum u_{i\neq k}(t)+n(t)) refers to the residual signal (including all yet-to-be-extracted modes). The aim is to extract a single mode u_{k} at each iteration rather than concurrently decomposing all K modes, then removing the effect of previously obtained modes by subtracting them from the signal one after the other [ 11 ] . The successive procedure helps alleviate the need to select a precise value for the parameter K [ 12 ] . Therefore, our method decomposes the signal by: i) extracting jumps using a sparsity-inducing regularizer, and ii) extracting the oscillatory components via successive minimization of a bandwidth-related term, effectively separating discontinuities from oscillations. II-A Optimization Formulation In this framework, the assumption is that each oscillatory mode is predominantly localized around a central frequency [ 2 ] while the discontinuities are wide-band components on the spectrum. Considering these two opposite features, incorporating two different terms in our formulation is required. To obtain the AM-FM oscillatory components from the data, we use the optimization formulation of SVMD that aims to minimize both the bandwidth of the AM-FM component u_{k} and the overlap between u_{k} and r successively until k=K : \displaystyle J_{1}=\footnotesize\Big\|\partial_{t}\Big[{{u_{k}}_{+}}(t)e^{-j\omega_{k}t}\Big]\Big\|^{2}_{2}+\Big\|h_{k}(t)*{r}(t)\Big\|^{2}_{2}, (1) where \partial_{t} denotes the partial derivative, u_{k+}(t)=u_{k}(t)+j\mathcal{H}u_{k}(t)=a_{k}(t)e^{j\phi_{k}(t)} (and \hat{u}_{k+}(\omega)=(1+\text{sgn}(\omega))\hat{u}_{k}(\omega) ) is the analytic signal with \mathcal{H} as the Hilbert transform, and \omega_{k} represents the center frequency of each mode. The squared l^{2} -norm term estimates the bandwidth of the k -th mode, where minimizing the bandwidth approximates it as a nearly pure sinusoid. The second term, which is the key distinction of our method compared to JMD, ensures that the successive procedure is performed through enforcing the energy of the residual signal r(t) to be minimized around the center frequency of the desired mode \omega_{k} . This is done using a filter h_{k}(t) with a frequency response of \hat{h}_{k}(\omega)=1/\alpha(\omega-\omega_{k})^{2} , where h_{k}(\omega)\rightarrow\infty if \omega\rightarrow\omega_{k} . To extract the jump component, we use a penalty term that penalizes the derivative of the jump component to promote a piecewise constant component [ 8 , 10 , 9 ] . It aims to accurately preserve the amplitude of the piecewise-constant signal component while improving the representation of sharp discontinuities in the jump component: \displaystyle J_{2}=\int_{0}^{\infty}\phi(|\partial_{t}v(t)|;b)\hskip 9.24994ptdt, (2) where \partial_{t}v(t):=v^{\prime}(t) represents the first derivative of the jump component. The non-convex sparsity-promoting penalty function \phi(\cdot;b):[0,+\infty)\to[0,1] is defined as a piecewise-quadratic function [ 8 ] , as follows: \displaystyle\centering\phi(x;b)\@add@centering \displaystyle=\begin{cases}-\frac{b}{2}x^{2}+\sqrt{2b}x&x\in[0,\sqrt{\frac{2}{b}}),\\ 1&x\in[\sqrt{\frac{2}{b}},+\infty),\end{cases} (3) where the parameter b changes the degree of non-convexity, such that for b\xrightarrow{}0 , the MC penalty is defined as \phi(x;b)=|x| and \phi(\cdot;b) tends to l_{0} -pseudonorm for b\xrightarrow{}\infty . This formulation has also been used successfully to extract jump components from input data [ 8 , 10 , 9 ] . In our proposed approach to obtain v(t) and u_{k}(t) using input data f(t) , we combine ( 1 ) and ( 2 ) within a single constrained optimization formulation as follows: \begin{split}\small\begin{aligned} (&\overset{*}{u}_{k},\overset{*}{\omega_{k}},\overset{*}{r},\overset{*}{v},x)\xleftarrow{}\underset{{{u}}_{k},\omega_{k},r,v,x}{\text{arg min}}\mathcal{J}({{u}}_{k},\omega_{k},r,v,x)\\ &\mathcal{J}({{u}}_{k},\omega_{k},r,v,x)=\Big\{\alpha\Big\|\partial_{t}\Big[{u}_{k+}(t)e^{-j\omega_{k}t}\Big]\Big\|^{2}_{2}\\ &+\Big\|h_{k}(t)*{r}(t)\Big\|^{2}_{2}+\beta\int_{0}^{\infty}\phi(|x(t)|;b)\hskip 2.84526ptdt\\ &+\Big\|s(t)-\Big(v(t)+r(t)+u_{k}(t)\Big)\Big\|^{2}_{2}\Big\},\hskip 9.24994pt\hskip 9.24994pt\hskip 9.24994pts.t.\hskip 9.24994ptx=\partial_{t}v.\end{aligned}\end{split} (4) where \alpha and \beta are balancing parameters for the first and third terms the auxiliary variable x:=\partial_{t}v is performed as a splitting technique to solve the problem of non-differentiability of the term \phi(\cdot;b) . Next, we convert ( 4 ) into an unconstrained formulation using Lagrangian multipliers, the following