Upper bounds on focusing light through multimode fibers
Amna Ammar, Sarp Feykun Şener, Mert Ercan, Hasan Yılmaz · 2025
Read Upper bounds on focusing light through multimode fibers by Amna Ammar, Sarp Feykun Şener, Mert Ercan, Hasan Yılmaz (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-07626.txt.
Introduction
Amna Ammar, Sarp Feykun Şener, Mert Ercan, and Hasan Yılmaz study how tightly light can be focused through a multimode fiber in this 2025 paper. Such fibers carry many light paths at once, which scrambles the beam. Shaping the incoming wave can undo the scramble and form a sharp spot.
In practice, only the wave's phase can be tuned, and noise blurs the tuning. The authors work out the top limit on spot brightness under those limits. Their lab tests then shaped the wave in a noise-tolerant way and came close to that limit. The spot grew about five thousand times brighter in a large-core fiber. The results matter for imaging through single fibers and for high-power fiber tools.
Catalog record
| CREATOR | Amna Ammar, Sarp Feykun Şener, Mert Ercan, Hasan Yılmaz |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 73 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-07626
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Upper bounds on focusing light through multimode fibers Amna Ammar, Sarp Feykun Şener, Mert Ercan, Hasan Yılmaz Abstract Wavefront shaping enables precise control of light propagation through multimode fibers (MMFs), facilitating diffraction-limited focusing for applications such as high-resolution single-fiber imaging and high-power fiber amplifiers. While the theoretical intensity enhancement at the focal point is dictated by the number of input degrees of freedom, practical constraints—such as phase-only modulation and experimental noise—impose significant limitations. Despite its importance, the upper bounds of enhancement under these constraints remain largely unexplored. In this work, we establish a theoretical framework to predict the fundamental limits of intensity enhancement with phase-only modulation in the presence of noise-induced phase errors, and we experimentally demonstrate wavefront shaping that approaches these limits. Our experimental results confirm an enhancement factor of 5000 in a large-core MMF, approaching the theoretical upper bound, enabled by noise-tolerant wavefront shaping. These findings provide key insights into the limits of phase-only control in MMFs, with profound implications for single-fiber imaging, optical communication, high-power broad-area fiber amplification, and beyond. pacs Valid PACS appear here I Introduction Multimode fibers (MMFs) are essential for high-resolution and ultra-thin single-fiber endoscopic imaging [ 1 , 2 , 3 , 4 , 5 , 6 , 7 ] , optical manipulation [ 8 , 9 ] , high-bandwidth short-distance optical communication [ 10 ] , precise laser-based material processing [ 11 ] , and power scaling in fiber amplifiers [ 12 , 13 , 14 , 15 ] . Their ability to support a large number of spatial modes increases the capacity for information transmission and energy delivery, but also introduces challenges due to modal dispersion and complex interference effects. Overcoming these challenges requires precise control over light propagation within MMFs. Wavefront shaping provides a powerful approach to manipulate interference at the fiber’s output by tailoring the input field using a spatial light modulator (SLM), enabling applications such as high-resolution imaging, targeted light delivery, and nonlinear effect management [ 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 ] . Precise control of the output field through input wavefront shaping requires accurately measuring the fiber’s transmission matrix, which characterizes the input-output field relationship [ 27 , 8 , 2 , 28 , 29 , 30 ] . This measurement is essential for optimizing wavefront shaping techniques, including the fundamental task of focusing light at a desired location [ 31 , 32 , 3 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 40 , 41 , 42 ] . A key metric for evaluating wavefront shaping performance for focusing light through complex media is the enhancement factor, which quantifies the intensity at the focal position [ 31 , 35 ] . The enhancement factor is defined as \eta_{m}=I_{m}^{(\mathrm{foc})}/\langle I_{m}^{(\mathrm{rand})}\rangle , where I_{m}^{(\mathrm{foc})} is the focus intensity at the target position m after wavefront shaping and \langle I_{m}^{(\mathrm{rand})}\rangle is the averaged intensity at the same position m over multiple independent random wavefront inputs [ 31 , 19 , 43 ] . To maximize the enhancement factor, an optimization algorithm is typically used to determine the ideal input wavefront [ 44 , 45 , 34 , 37 , 38 , 46 , 43 ] . Fundamentally, these algorithms are based on some form of transmission-matrix measurement. In principle, with complete control over both the amplitude and phase of the input channels, all transmitted power can be efficiently collected at a desired focal position [ 40 ] . However, in practice, there are certain limitations to the focus intensity due to incomplete input channel control [ 47 , 43 ] . With full-field modulation of the input wavefront, the upper bound of the enhancement factor equals the number of controlled channels, \eta=N . This result relies on ideal amplitude and phase control, as well as ideal mode coupling—conditions typically satisfied in short, low-loss multimode fibers where mode-dependent loss is negligible (see Appendix B). Nevertheless, most SLMs function primarily as phase-only modulators, as amplitude modulation is generally avoided in practice [ 17 ] . This is because amplitude modulation reduces the input power, making it less efficient for applications requiring high-intensity light focusing, such as broad-area fiber amplifiers and laser ablation through large-core optical fibers [ 11 , 48 , 49 , 50 ] . Therefore, in practical scenarios, phase-only input modulation is typically preferred; the input wavefronts can be optimally shaped to achieve constructive interference at the desired focus location at the fiber’s output, maintaining a constant input power [ 22 , 24 , 44 , 49 ] . This constraint inherently limits the maximum enhancement factor, with its theoretical upper bound, following \eta=R(N-1)+1 , where R=\pi/4 represents the participation ratio—a well-established result for focusing light through disordered scattering media. [ 31 , 51 , 44 , 45 , 19 , 43 ] . Although the assumption that the participation ratio is R=\pi/4 has been widely used to estimate the upper bound of the enhancement factor in wavefront shaping through multimode fibers (MMFs), its validity has not been critically examined. This raises a fundamental question: is the participation ratio for phase-only modulation in MMFs R=\pi/4 similar to that in disordered media? If so, what is the upper limit of the achievable enhancement factor, and can it be experimentally reached? Here, we present a comprehensive work that combines both experimental and theoretical aspects of wavefront shaping. We introduce the theoretical upper bound on the enhancement factor for phase-only modulation; moreover, we experimentally demonstrate it for focusing light through a multimode fiber (MMF). We first describe how the participation ratio R depends on the basis used for phase-only modulation. Our theoretical calculations and experimental observations reveal that when wavefront modulation is performed on the Fourier space of the proximal end of the fiber, the R_{m}=\pi/4 at any fiber output position m , which closely resembles the well-known result observed in disordered media. In contrast, phase-only modulation in the fiber mode basis reveals a strong radial dependence of R at the fiber’s distal end. To experimentally approach the theoretical upper bound of the enhancement factor for phase-only modulation, we perform noise-tolerant transmission-matrix measurements using a Hadamard basis, achieving an enhancement factor of \eta=5,000 . We also introduce a predictive method that combines our theoretical framework with measured phase errors in a practical wavefront shaping setup. Using this approach, we quantify the phase errors in transmission-matrix measurements both in the canonical (SLM pixel) and Hadamard bases. This method provides a clear quantitative understanding of how Hadamard-based measurements minimize phase errors, enabling near-ideal wavefront shaping. By linking theoretical predictions with experimental observations, this work establishes a foundation for accurately predicting the enhancement factor and achieving near-perfect phase-only wavefront shaping in multimode fibers. Our findings directly advance the development of more robust and efficient wavefront shaping techniques, with broad applications in high-resolution imaging, broad-area fiber amplifiers, laser ablation through multimode fibers, and beyond. Figure 1: Wavefront shaping setup and the results are shown. (a) Experimental setup: The spatial light modulator (SLM) modulates the laser beam on the multimode fiber’s proximal end and focuses on the distal end. P: linear polarizer; HWP: half-wave