Neural Signal Compression using RAMAN tinyML Accelerator for BCI Applications

Adithya Krishna, Sohan Debnath, Madhuvanthi Srivatsav, André van Schaik, Mahesh Mehendale, Chetan Singh Thakur* · 2025

Read Neural Signal Compression using RAMAN tinyML Accelerator for BCI Applications by Adithya Krishna, Sohan Debnath, Madhuvanthi Srivatsav, André van Schaik, Mahesh Mehendale, Chetan Singh Thakur* (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-06996.txt.

Introduction

Six researchers compress brain signals on a tiny chip for brain-computer interfaces, in a 2025 paper. Neural recorders with hundreds of electrodes produce floods of data. Sending raw data wirelessly drains power and heats tissue, so the data must shrink on the device itself.

Their scheme uses a convolutional autoencoder, a network that squeezes signals into a compact code. It reached compression of up to one hundred fifty to one for slow brain wave data. The encoding half runs on RAMAN, a small energy-saving accelerator chip the team built for the task. Pruning tuned to the hardware cut storage needs by about a third. Tests on two monkey recordings rebuilt the signals with good fidelity. The chip used only microwatts per channel, a level safe for implanted use.

Catalog record

CREATORAdithya Krishna, Sohan Debnath, Madhuvanthi Srivatsav, André van Schaik, Mahesh Mehendale, Chetan Singh Thakur*
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE62 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-06996

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Neural Signal Compression using RAMAN tinyML Accelerator for BCI Applications Adithya Krishna, Sohan Debnath, Madhuvanthi Srivatsav, André van Schaik, Mahesh Mehendale, Chetan Singh Thakur* Abstract High-quality, multi-channel neural recording is indispensable for neuroscience research and clinical applications. Large-scale brain recordings often produce vast amounts of data that must be wirelessly transmitted for subsequent offline analysis and decoding, especially in brain-computer interfaces (BCIs) utilizing high-density intracortical recordings with hundreds or thousands of electrodes. However, transmitting raw neural data presents significant challenges due to limited communication bandwidth and resultant excessive heating. To address this challenge, we propose a neural signal compression scheme utilizing Convolutional Autoencoders (CAEs), which achieves a compression ratio of up to 150 for compressing local field potentials (LFPs). The CAE encoder section is implemented on RAMAN, an energy-efficient tinyML accelerator designed for edge computing. RAMAN leverages sparsity in activation and weights through zero skipping, gating, and weight compression techniques. Additionally, we employ hardware-software co-optimization by pruning the CAE encoder model parameters using a hardware-aware balanced stochastic pruning strategy, resolving workload imbalance issues and eliminating indexing overhead to reduce parameter storage requirements by up to 32.4%. Post layout simulation shows that the RAMAN encoder can be implemented in a TSMC 65-nm CMOS process, occupying a core area of 0.0187 mm 2 per channel. Operating at a clock frequency of 2 MHz and a supply voltage of 1.2 V, the estimated power consumption is 15.1 μ \mu W per channel for the proposed DS-CAE1 model. For functional validation, the RAMAN encoder was also deployed on an Efinix Ti60 FPGA, utilizing 37.3k LUTs and 8.6k flip-flops. The compressed neural data from RAMAN is reconstructed offline with signal-to-noise and distortion ratios (SNDR) of 22.6 dB and 27.4 dB, along with R2 scores of 0.81 and 0.94, respectively, evaluated on two monkey neural recordings. I Introduction In recent years, the Brain-Computer Interface (BCI) has garnered significant attention for facilitating direct communication between the human brain and external devices [ 1 , 2 , 3 , 4 ] . BCIs have emerged as a revolutionary tool for advancing our understanding of the brain and are increasingly being utilized across various clinical applications [ 5 , 6 , 7 ] , providing inventive solutions for communication [ 8 ] , control [ 9 , 1 ] , and rehabilitation [ 10 , 11 , 12 , 13 ] . Ongoing improvements in signal processing, machine learning algorithms, and neurotechnology pave the way for BCIs to revolutionize healthcare, human-computer interaction, and beyond. BCIs can potentially restore lost sensory abilities, such as vision and hearing [ 14 , 15 , 16 ] through stimulation and regain lost motor functions for individuals with motor impairments, such as those caused by conditions like ALS or spinal cord injury [ 17 , 18 ] . In clinical settings, BCIs can interpret the user’s intentions from brain activity and use this information to control the person’s limb or an assistive device, such as a prosthetic arm or a computer cursor, necessitating simultaneous recordings from a relatively large population of neurons to achieve acceptable prediction accuracy. Intracortical neural recording systems have evolved significantly, progressing from widely used recording arrays like the Utah Array [ 19 ] , which supports up to a hundred recording sites, to high-density electrodes such as [ 20 ] , Neuralink [ 21 ] , and Neuropixel [ 22 ] . These state-of-the-art intracortical neural recording systems have thousands of recording sites, producing massive amounts of neural data that require wireless transmission for offline signal analysis and decoding. Continuous wireless transmission of raw neural data poses a significant challenge due to constrained communication bandwidth (low data rates) and leads to excessive heating. For instance, a system comprising 1024 channels, sampled at 30 kS/s with 16 bits per sample, generates 491.52 Mb/s of data that must be wirelessly transmitted. To mitigate this, the data undergoes compression before transmission. Compressed sensing (CS) is one such prominent method that reduces the data dimensionality by multiplying the input signal X of dimension (1\times M) with a sensing matrix of size (M\times N) to produce the compressed output signal Y of dimension (1\times N) , with compression ratio (CR) M/N(M>>N) [ 23 , 24 ] . Reconstruction of the compressed signal to its original form utilizes CS-based reconstruction algorithms [ 25 ] , with an emerging interest in deep learning-based methods [ 24 ] . Additionally, various lossless compression techniques, categorized into dictionary-based and statistical-based schemes, offer further compression options for neural data. Dictionary-based compression [ 26 , 27 , 28 , 29 ] relies on creating a dictionary of frequently occurring patterns in the data and replacing them with shorter codes or references to entries in the dictionary. Statistical compression utilizes statistical models to represent and encode data more efficiently. One standard method of statistical compression is Huffman coding [ 30 , 31 ] . In Huffman coding, symbols with higher frequencies are assigned shorter codewords, while symbols with lower frequencies are assigned longer codewords. This ensures that more common symbols are represented with fewer bits, leading to overall compression. Lossless compression schemes like Huffman coding ensure that the original input signal is accurately reconstructed from the compressed data without any reconstruction errors. In contrast, lossy compression methods, such as compressed sensing (CS), can achieve significantly higher compression ratios but at the expense of introducing reconstruction errors. Additionally, several spike compression schemes have been proposed [ 32 , 33 , 34 , 35 ] , with associated data transformations to better represent the signal space [ 36 ] . These methods focus exclusively on compressing spike waveforms for applications employing single-unit activities (SUAs) and multi-unit activities (MUAs). In contrast, our work focuses on compressing local field potentials (LFPs), where spike detection, extraction, and sorting methods are not applicable. LFPs, which capture slower voltage fluctuations (<300 Hz) with lower spatial resolution than SUAs and MUAs, offer greater long-term stability against factors such as electrode drift, neuron drop-out, and scarring at the electrode-tissue interface [ 37 ] . While MUA-based BCIs primarily decode motor cortex activity, LFP-based BCIs target higher-level cognitive regions like the posterior parietal cortex, enabling advanced cognitive decoding [ 38 ] . Studies have shown that LFP signals can reliably decode neural activity; for example, [ 39 ] demonstrated that movement intentions, kinematic trajectories, and movement types can be accurately predicted from LFP signals. In this work, we propose a convolutional autoencoder-based neural signal compression scheme for compressing the LFPs. Autoencoders are neural networks used for the unsupervised learning of efficient codings or representations of the input data [ 40 , 41 , 42 , 43 ] . They consist of two main components: an encoder and a decoder. The encoder network maps the input data to a lower-dimensional latent space representation, also known as a codeword or encoding, which effectively compresses the neural signal. The decoder network takes the encoded representation produced by the encoder and attempts to reconstruct the original input signal from it. The encoder network is implemented using RAMAN, a R e-configurable and sp A rse tiny M L A ccelerator for infere N ce proposed in [ 44 ] for edge computing applications to compress the input

Read the complete text