Analog phase-sensitive time-reversal of optically-carried radiofrequency signals Journal: opticajournal

Thomas Llauze, Anne Louchet-Chauvet · 2025

Read Analog phase-sensitive time-reversal of optically-carried radiofrequency signals Journal: opticajournal by Thomas Llauze, Anne Louchet-Chauvet (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-05031.txt.

Introduction

Thomas Llauze and Anne Louchet-Chauvet report the first fully analog, phase-preserving time reversal of radio signals carried on light, in a 2025 paper. Reversing a broadband signal with low delay matters for reliable communication in fast-changing settings. Earlier methods either leaned on digital processing, which struggles at wide bandwidths, or handled amplitude only and lost the phase.

Their setup uses rare-earth ion-doped materials and the photon echo effect, a tool long used in quantum technology. The demo ran at a modest bandwidth, but the authors pinpoint why and propose routes to scale it up. The result points toward analog hardware that can undo signal distortion without going digital.

Catalog record

CREATORThomas Llauze, Anne Louchet-Chauvet
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-05031

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Analog phase-sensitive time-reversal of optically-carried radiofrequency signals Journal: opticajournal Thomas Llauze, Anne Louchet-Chauvet Abstract Achieving low-latency time-reversal of broadband radiofrequency signals is crucial for reliable communications in dynamic, uncontrolled environments. However, existing approaches are either digitally assisted –making broadband extension challenging– or limited to amplitude modulation. In this work, we report the very first experimental realization of a fully analog, phase-preserving time-reversal architecture for optically-carried radiofrequency signals. The method exploits the exceptional coherence properties of rare-earth ion-doped materials, and leverages the well-established photon echo mechanism, widely used in quantum technologies. While our demonstration is conducted with a modest bandwidth, we identify the fundamental cause of this limitation and propose solutions for future scalability. 1 Introduction Time-reversal is an efficient way to focus waves in a complex environment [ 1 ] . It was initially proposed for acoustic waves and resulted in very diverse applications, ranging from medical imaging and therapy [ 2 ] , to geoscience [ 3 ] and underwater communications [ 4 ] . More recently, time-reversal has been extended to radiofrequency waves [ 5 ] and successfully demonstrated in pratical demonstrations in a reverberating chamber [ 6 , 7 ] . In dynamic environments such as urban landscape, a fast time-reversal operator is essential for real-time adaptation to the medium. However, digital approaches are constrained by the limitations of digital-to-analog converters (DAC). Indeed, despite ongoing advancements in bandwidth, processing speed and memory depth, these figures of merit cannot be simultaneously optimized, and some compromise must be found. Specifically, in the case of broadband RF communication in a non-stationary, uncontrolled medium including moving objects at speeds up to 20 m/s, achieving sub-ms latency is crucial, yet remains challenging with multi-GHz-bandwidth DACs. One can by-pass the digitization step altogether by resorting to purely analog solutions. Among these, microwave photonics-based systems [ 8 ] stand out, leveraging the high bandwidth and low losses of photonic components. The analog time-reversal of an optically-carried signal was first obtained using a dispersive optical medium, namely fibers [ 9 ] , Bragg gratings [ 10 ] , or spectral gratings in an inhomogeneously broadened atomic absorption line [ 11 ] . Their analog nature ensures minimal latency (a few \mu s at most) and the duration of the signals that can be processed, related to the dispersive power of the optical medium, can reach values as high as several \mu s. Nevertheless, by construction, these methods are only compatible with monochromatic, amplitude-modulated RF signals, since they require a univocal time-to-frequency correspondence in the optical domain. In this work, we explore the capabilities of an original analog time-reversal protocol based on coherent light-matter interaction in a rare-earth ion-doped crystal. We show that unlike the previous demonstrations, this approach enables the retrieval of the radiofrequency field in amplitude and phase. 2 Analog signal processing architectures derived from photon echo 2.1 Principle and examples Three-pulse photon echo (3PPE) is a four-wave mixing process operating in the temporal domain. When three time-separated fields are shined onto an inhomogeneously broadened medium, the latter radiates a delayed coherent response (the "echo") whose time-dependent field (to the lowest order) reads as: \mathcal{E}_{echo}(t)=\mathcal{E}_{1}^{*}(-t)\otimes\mathcal{E}_{2}(t)\otimes\mathcal{E}_{3}(t) (1) A broad variety of microwave photonics-related signal processing architectures have been proposed based on this photon echo mechanism, including data bit-rate conversion [ 12 ] , spectral analysis [ 13 , 14 ] , arbitrary signal generation [ 15 ] , correlative processor [ 16 ] , and time-reversal of amplitude-modulated optical signals [ 11 ] . They always function as follows: the input, optically-carried information serves as the first, second or third field. The remaining two fields are shaped by the user, enabling the spontaneous generation of the echo carrying the processed output. Such architectures are by essence immune to computation delay. Their spectral bandwidth and resolution are ultimately limited by the width of the inhomogeneous atomic absorption line and by the homogeneous linewidth of the selected optical transition, respectively. They can reach highly attractive values (several tens or hundreds of GHz for the former, a few kHz for the latter), combined with a processing time of a few \mu s, ensuring competitiveness with digital approaches. 2.2 Time-reversal scheme We propose a similar approach to achieve time-reversal of optically-carried RF signals. This method directly leverages the explicit time-reversal operation in equation 1 . The input signal serves as the first excitation field \mathcal{E}_{1}(t) , while the second and third excitation fields \mathcal{E}_{2}(t) and \mathcal{E}_{3}(t) (referred to as "control fields") are designed as two successive linear frequency chirps with opposite slopes \mathcal{E}_{2}(t)=e^{i\pi rt^{2}} and \mathcal{E}_{3}(t)=e^{-i\pi rt^{2}} . This way, the impulse response of the time-reversal filter, given by the convolution of the two control fields, produces a short pulse \mathcal{E}_{2}(t)\otimes\mathcal{E}_{3}(t)\simeq\delta(t) , leading to : \mathcal{E}_{echo}(t)\simeq\mathcal{E}_{1}^{*}(-t) (2) In practice, the finite duration of the control fields leads to a temporal broadening of the impulse response. For example, when the control fields have a rectangular temporal shape with duration T , the impulse response reads as: \mathcal{E}_{2}(t)\otimes\mathcal{E}_{3}(t)\simeq\frac{\sin(\pi rTt)}{\pi rt} . This scheme has several intrinsic limitations imposed by the spectroscopic properties of the atomic medium in which the photon echo mechanism takes place. First, the processing bandwidth is limited by the inhomogeneous width \Gamma_{inh} of the atomic absorption line, and by the spectral range covered by the second and third fields. Second, the first and second fields must illuminate the atomic medium within a time interval no longer than the optical coherence lifetime T_{2} to ensure that the atomic ensemble records the spectral interferences. This constraint limits both the signal duration and the duration of the control pulses. In particular, the echo field envelope will suffer from a time-dependent attenuation e^{\frac{-2t}{T_{2}}} . Finally, the echo field expression (Equation 1 ) only holds in the lowest-order approximation, assuming weak optical fields. Under these conditions, the photon echo remains weak but, as a coherent emission, it can be efficiently detected using heterodyne methods [ 17 ] . 3 Experimental demonstration 3.1 Experimental setup The experimental setup is shown in Figure 1 . The laser is a cw Distributed Bragg Reflector source (Photodigm DBR795PH), externally modulated to perform frequency excursions. These frequency excursions are controlled with a versatile, four-stage correction method including pre-distorsion of the voltage command, feedback and feed-forward real-time correction [ 18 ] . This allows us to routinely obtain MHz-scale errors on steep excursions and laser linewidth reduction down to 30 kHz during fixed frequency operation. The DBR chip is cooled down to 5^{\circ} C in order to reach the absorption wavelength of Tm 3+ ions in YAG ( 793.379 nm in vacuum). A 3\times 4\times 5 mm 3 , 0.5\%at. Tm:YAG single crystal (FLIR Scientific Materials) is placed in the vacuum chamber of a closed-cycle, low-vibration cryocooler (Montana Instruments s50 Cryostation). Due to the coupling of the optical lines to mechanical strain [ 19 ] , further vibration damping is required and a home-made vibration-damping platform is used. In such conditions, the crystal reaches a 3.5 K temperature and exhibits an inhomogeneous broadening \Gamma_{inh}=17 GHz, a peak absorption \alpha L=2 and an optical coherence lifetime T_{2}\simeq 10\penalty\ \mu s. The crystal is illuminated by a single laser beam, temporally shaped using a double-pass acousto-optic modulator (AOM, AA Opto-Electronic). The

Read the complete text