Leaky Mode Generation by means of All-Metal Corrugated Slotted Waveguides

Yuhuan Tong Beatrice Ambrogi · 2025

Read Leaky Mode Generation by means of All-Metal Corrugated Slotted Waveguides by Yuhuan Tong Beatrice Ambrogi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-04229.txt.

Introduction

Yuhuan Tong and co-authors describe an all-metal antenna design that steers a radio beam by sweeping its frequency. Their 2025 paper covers leaky-wave antennas, flat structures that radiate a tight beam whose direction shifts with frequency. The team builds theirs from a corrugated, slotted parallel-plate waveguide made wholly of metal.

Corrugations slow the wave inside the guide, and slots cut in the top plate turn it into a fast radiating wave. Careful choice of the two spacings leaves one harmonic doing the radiation, and a new unit cell design suppresses a glitch that usually breaks the sweep at broadside. The team analyzed the design with an exact in-house code and checked it in full-wave simulations in the Ka band. The antenna scans without gaps, radiating at broadside near 29.7 gigahertz, with gain and efficiency matching structures ten times thicker.

Catalog record

CREATORYuhuan Tong Beatrice Ambrogi
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-04229

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Leaky Mode Generation by means of All-Metal Corrugated Slotted Waveguides Thanks: This work is supported by the Air Force Office of Scientific Research under award number FA8655-23-1-7018 and by the Horizon Europe Research and Innovation Program under the GENIUS Project, Marie Skłodowska-Curie Grant under Agreement 101072560. Thanks: B. Ambrogi, and D. Comite are with the Department of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, Rome, Italy, e-mail:{beatrice, comite}@uniroma1.it Thanks: Y. Tong and G. Valerio, are with the Department of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, Rome, Italy, e-mail:{beatrice, comite}@uniroma1.it Thanks: Manuscript received Month XX, 20ZZ. Yuhuan Tong Beatrice Ambrogi Abstract Leaky-wave antennas support the generation of highly directional beams by means of planar and low-profile structures. Designs based on periodic cells provide frequency scanning both in backward and forward directions. In this letter we propose a new method to generate leaky modes with an all-metal periodic 2-D waveguide (i.e., invariant along the direction normal to the propagation). First, Periodic corrugations within a parallel plate waveguide are introduced to support a slow wave, which is suitably perturbed with periodic slots etched on the top plate. This transforms the slow wave in fast waves: a suitable choice of the two periods lead to a single fast backward-forward spatial harmonic being responsible for well-defined and directional radiation. The proposed method is proved here proposing an original and new unit cell, optimized to suppress the open stop band. The analysis and the design is accomplished with a rigorous periodic method of moments allowing for the computation of complex modes in open 2-D waveguides. The corresponding 1-D leaky-wave antenna is studied and validated by means of full-wave simulations in Ka band. The structure features continuous beam scanning with broadside radiation at 29.6 GHz with an all-metal compact design. I Introduction Next generation of wireless and navigation technologies are undergoing a significant spectral transition. The increasing congestion in the C and Ku bands is driving both the scientific community and industry to K and Ka-bands. This is desirable to meet the growing demand for higher data rates, to improve spectral efficiency, as well as to decrease the size, especially for space applications. At higher frequencies dielectric losses can be very high and space applications demand for compact and robust antennas, whose performance must be reliable and invariant over time (e..g, across the satellite expected operation). All-metal solutions, all-metal leaky-wave antennas (LWAs) in particular, offer low profile designs, ease of fabrication, and minimize losses, especially at K band and beyond. Their inherent frequency scanning capabilities also render LWAs ideal solutions for beam-steering applications [ 1 ] . For example, LWAs can be ideal candidates for next-generation indoor positioning systems. Broadside radiation it is also possible with LWAs, whose design can be optimized to maximize gain and bandwidth [ 1 ] . Fig. 1: Geometry of the metallic corrugated radially periodic antenna under analysis. (a) Three-dimensional view (b) Unit cell analysis with the relevant geometric parameters. Recent advancements have introduced different solutions of corrugated all-metal antennas, incorporating one or two layers and exploiting different corrugation geometries (sinusoidal, rectangular, and compound shapes) [ 2 ] , [ 3 ] , [ 4 ] . The corrugations are arranged in radial periodicity, and their shape can be properly optimized based on array theory and/or full-wave simulations [ 4 ] , [ 5 ] , [ 6 ] . A local linearized model of the curved geometry can be defined (see, e.g., [ 7 ] and refs. within), an approximation required due to lack of translational symmetry in annular geometries. The unit cell of this structure can be properly designed to support leaky modes with fast backward or forward spatial harmonics (see, e.g., [ 8 ] . As predicted by leaky-wave theory, when properly excited, such configurations enable high-gain pencil beam scanning across the broadside [ 1 ] or high-gain beams with consistent radiation at broadside [ 7 ] . Properly optimizing the dispersion, wideband radiation is also possible. However, periodic structures designed to radiate across the transition from the backward region to the forward exhibit the presence of an open stop band (OSB) [ 9 ] . In this respect, a dispersive analysis was proposed in [ 8 ] to characterize the leaky mode supported by a corrugated periodic structure, as well as a solution to effectively suppress the OSB. We propose here, for the first time, the design of an all-metal antenna supporting the radiation of a singl fast spatial harmonic. The letter is structured as follows. Section II describes the details of the corrugated structure. Section III outlines the design principles for achieving a LWA with suppressed OSB using two different slot configurations. The analysis begins with a closed structure, followed by the design of an open structure incorporating radiating slots based on the closed configuration. An efficient method-of-moments (MoM) approach is employed to accurately compute the phase and attenuation constants of the open structures with varying slot parameters, leading to the final optimized design for OSB suppression. Conclusions are summarized in section IV. II Description of the structure The LWA under consideration is designed based on a parallel plate waveguide (PPW). First, an artificial waveguide is designed by introducing periodic corrugations in the bottom plate of the PPW. The slow wave propagating along the corrugation is than converted into a leaky modes properly etching the top plate with periodic slots, separated by a gap g . The configuration is illustrated in Fig. 1 . The corrugations have a depth h and a width w , with a periodic spacing p_{\textrm{c}} . The slots on the top plate have widths w_{1} and w_{2} , with a distance d between them. The length of the slotted unit cell p_{\textrm{s}} . The cell is rigorously 2-D (invariant along the y direction) and we study here the high-frequency behavior of the TM x Floquet mode obtained by starting from a well known corrugated structure, whose low-frequency guided-wave regime is well known [ 10 ] . This is in contrast with the phenomenology of the dispersion associated to metal strip grating, where leaky modes are excited by periodically perturbing the propagation of a surface wave [ 11 ] , [ 12 ] . The complex wavenumber of the wave propagating in the structure is given by k=\beta-j\alpha , where \beta is the phase constant and \alpha is the attenuation constant. The phase constant \beta determines the main radiation direction \theta , which can be estimated using the relation \theta=\sin^{-1}(\beta/k_{0}) . Variations in \beta with frequency directly influence the beam scanning behavior. The attenuation constant \alpha accounts for the losses (in the case of a lossless structure, only those due to leakage and reactive effects [ 13 ] ). It determines the antenna length for a given efficiency, and the beamwidth of the radiation pattern. III Design procedure of the scanning LWA The design process consists of two main steps. First, a corrugated structure in a PPW is analyzed to design the scanning rate of the structure. Then periodic slots are introduced to convert the guided-wave mode into a leaky regime. III-A Preliminary design of the closed structure Due to the periodic nature of the corrugations, the dispersion

Read the complete text