To roll or not to roll(?) is the yield stress (in soft particulate gels)

Rishabh V. More, Gareth H. McKinley · 2025

Read To roll or not to roll(?) is the yield stress (in soft particulate gels) by Rishabh V. More, Gareth H. McKinley (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-03672.txt.

Introduction

Rishabh More and Gareth McKinley probe why soft gels resist flow in a 2025 paper. Gels made of sticky particles form spanning networks that give a yield stress: they act solid until pushed hard enough. The puzzle is which microscopic feature creates that threshold, since clumping alone seemed a likely cause.

Simulations of a model gel show clumping is not enough. The missing piece is a constraint on how bonded particles can rotate against each other. When rotation is locked, the network holds stress; when free, it gives way. Readers get a design lever for foods, inks, and other gel products.

Catalog record

CREATORRishabh V. More, Gareth H. McKinley
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-03672

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

To roll or not to roll(?) is the yield stress (in soft particulate gels) Preprint: APS/123-QED Rishabh V. More, Gareth H. McKinley Abstract While it is widely acknowledged that system-spanning particulate structures contribute to the observed yield stress and shear-thinning in attractive colloidal gels, a comprehensive understanding of the underlying microscopic mechanisms remains elusive. In this study, we present findings from coarse-grained simulations focusing on model depletion gels to shed light on this intriguing phenomenon. Contrary to conventional belief, our simulations reveal that the mere presence of attractive interactions and aggregate formation does not sufficiently explain the observed yield stress. Instead, we identify a crucial physics element in the form of microscopic constraints on the relative rotational motion between bonded particles. Through a detailed analysis of microstructure and particle dynamics, we elucidate how these constraints lead to the emergence of yield stress in soft particulate gels. This research provides essential insights into the micromechanical origins of yield stress in soft particulate gels, paving the way for improved understanding and engineering of these versatile materials for various real-world applications. Introduction. —Colloidal dispersions are a versatile class of materials with wide-ranging applications across industries, including consumables, pharmaceuticals, cosmetics, and tissue engineering Varga et al. 2015 ; Hilali et al. 2022 . Characterized by a dispersed phase of colloidal particles in a fluid medium, these gels exhibit complex rheology driven by various microscopic interactions of a reversible or irreversible nature. Especially, they form an aggregated network through attractive interactions such as Van der Waals or depletion forces Varadan and Solomon 2001 ; Lu and Weitz 2013 . The resulting quiescent structures and their evolution in time have been studied extensively with respect to governing parameters such as particulate volume fraction \phi , the strength of inter-particle attractive potential U_{A} , and its range \delta Lu and Weitz 2013 ; Varga et al. 2015 . At intermediate volume fractions 10\%\leq\phi\leq 50\% and moderate reversible attractions, the networks are found to be in an arrested glassy state at small length scales to domain-spanning network at long length scales Zaccone et al. 2009 . Elasticity emerges in these systems as the interconnections between minimal glassy, load-bearing clusters increase with the strength of attraction and time Whitaker et al. 2019 , and has been fairly well understood Bantawa et al. 2023 . Notably, this structure build-up with time from an initial disordered homogeneous state results in the aging of colloidal dispersions Abou et al. 2001 . Under a finite deformation, these aggregated networks undergo gradual rearrangements with progressively increasing load Massaro et al. 2020 ; Jamali et al. 2017 . These rearrangements and progressive destruction of the structure have been believed to result in yielding at a critical finite stress known as the yield stress \sigma_{y} , beyond which flow occurs Bonn et al. 2017 . Upon yielding, the material exhibits shear-thinning rheology in a steady state and thixotropy, i.e., time-dependent behavior Larson and Wei 2019 . The success of the studies as mentioned above and Brownian dynamics simulations of model attractive colloids at rest in the intermediate volume fraction regime has created an observational bias, which only considers attraction-induced aggregation as a possible cause of yield stress in soft particulate gels Bonacci et al. 2022 . However, the microscopic mechanism for the emergence of yield stress in highly dilute attractive soft particulate gels remains elusive. Highly dilute colloidal dispersions ( \phi\leq 10\% ), which are below the critical volume fraction of percolation Campbell et al. 2005 , a percolated network structure is not possible, i.e., these systems remain weakly flocculated Dullaert and Mewis 2005 . As a result, attraction-induced clustering alone is insufficient to give rise to yield stress as there may not be enough interconnections (or constraints on particle motion) between load-bearing glassy clusters to sustain finite stress at low deformations. Furthermore, clusters may not be dynamically arrested in dilute regime Zhang et al. 2024 . Despite this fact, highly dilute colloidal dispersions such as gels of sub-micron particles in microgravity ( \phi=2\% ) Manley et al. 2005 and the model thixotropic colloidal dispersion of fumed silica ( \phi=2.9\% ) Dullaert and Mewis 2005 have been shown to exhibit finite yield stress. Thus, micro-mechanical underpinnings of yield stress in dilute colloidal dispersions hitherto are not completely understood. Figure 1 : a) Steady-state flow curves of \phi=5\,\% attractive depletion gels for three rolling friction values with the same attraction strengths. The simulation results agree well with the steady state flow curve of a model thixotropic fluid Dullaert and Mewis 2005 with \sigma_{0}=30 Pa and \dot{\gamma}_{0}=2\,s^{-1} for the experimental data. b) Various structure parameter \lambda and shear-rate \dot{\gamma} dependent contributions to the total dimensionless shear stress \sigma as a function of Pe for \mu_{R}=1 . c) Dimensionless yield stress increases with the increase in rolling friction. Bottom row: Representative snapshots of the attractive aggregates in the shear plane in the yield region (low Pe\approx 0.002 : I, II, III in (a)) for three different \mu_{R} . At Pe\approx 200 (IV), the structure is destroyed due to high shearing. To this end, using discrete particle simulations, we show that attraction-induced aggregation is necessary but not enough for the presence of yield stress in dilute attractive colloidal dispersions. Attractive forces, which are center-to-center, not only bring colloidal particles together to form clustered structures, but they also introduce solid-solid inter-particle contacts leading to not only center-to-center but also tangential forces and torques Singh et al. 2020 . These result in constraints on the relative sliding and rolling motion between particles and have been shown to result in macroscopic aging in moderately dense colloidal suspensions Bonacci et al. 2020 ; Bonacci et al. 2022 . We show that the yield stress arises from the constraints on the relative rolling motion between the particles in the aggregation clusters. This results in a resistance to the purely angular velocity component of the applied shear deformatio,n manifesting as the yield stress at low shear rates. The calculated structure factor patterns reveal the distinct micro-structural signature of these rolling constraints, which could be validated using the scattering pattern in beam scattering experiments. Governing interactions. —We simulate the shear flow of 8192 neutrally buoyant inertia-less spherical particles with a radius a in a cubical domain for a fixed volume fraction of \phi=5\% suspended in a Newtonian fluid with a constant viscosity \eta_{0} . The imposed shear rate is \dot{\gamma} with Lees-Edwards periodic boundary conditions on all the sides. The particles experience Stokes drag as well as pair-wise inter-particle interactions such as hydrodynamic lubrication \mathbf{F}_{H} Ball and Melrose 1997 , attractive depletion forces \mathbf{F}_{A} Varga et al. 2015 , solid-solid contract forces \mathbf{F}_{C} Singh et al. 2020 , and Brownian force \mathbf{F}_{B} Kumar 2010 as well as the corresponding torques \mathbf{T}_{H} , \mathbf{T}_{A} , \mathbf{T}_{C} , and \mathbf{T}_{B} . To satisfy the fluctuation-dissipation theorem, we produce Brownian forces that follow \langle\mathbf{F}_{B}\,\mathbf{F}_{B}\rangle=(2k_{B}T/\Delta t)\,\mathbf{\mathcal{R}} and \langle\mathbf{F}_{B}\rangle=\mathbf{0} . k_{B} is the Boltzmann constant, and T is the temperature in absolute units with k_{B}T being the thermal energy magnitude, and \Delta t is an appropriately chosen simulation time-step. \mathbf{\mathcal{R}} is the overall resistance tensor for the system and also gives the hydrodynamic interactions between the particles as \mathbf{F}_{H}=\eta_{0}\mathbf{\mathcal{R}}\cdot\begin{pmatrix}\mathbf{U}^{\infty}-\mathbf{U}\\ \mathbf{E}^{\infty}\end{pmatrix} . The

Read the complete text