Launching of asymmetric outflows from the star-disk magnetosphere

M. Čemeljić, A. Kotek, W. Kluźniak · 2025

Read Launching of asymmetric outflows from the star-disk magnetosphere by M. Čemeljić, A. Kotek, W. Kluźniak (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-03308.txt.

Introduction

Miljenko Čemeljić, Aleksandra Kotek, and Włodek Kluźniak wrote a 2025 astrophysics paper on outflows from young stars. Where a star's magnetic field meets its surrounding disk, gas can be launched outward along the axis. Their simulations include both electrical resistance and viscosity in the magnetized gas.

The launched outflows turned out to be asymmetric, with the two sides differing. The team mapped which settings give steady, long lived axial outflows. For those cases they measured how much mass the outflow carries and how much angular momentum it removes. They also chart the shape of the solutions and the speed at which the outflows travel and rotate. Such outflows help explain how young stars shed spin and shape their surroundings.

Catalog record

CREATORM. Čemeljić, A. Kotek, W. Kluźniak
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-03308

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Launching of asymmetric outflows from the star-disk magnetosphere M. Čemeljić, A. Kotek, W. Kluźniak Abstract In resistive and viscous magnetohydrodynamical simulations, we obtain axial outflows launched from the innermost magnetosphere of a star-disk system. The launched outflows are found to be asymmetric. We find the part of the parameter space corresponding to quasi-stationary axial outflows and compute the mass load and angular momentum flux in such outflows. We display the obtained geometry of the solutions and measure the speed of propagation and rotation of the obtained axial outflows. 1 Introduction In spite of over a century of investigation, astrophysical jets, which are highly collimated and energetic outflows of matter, are still a very active field of research at all scales. Observations of jets, collected at steadily increasing resolution, are now reaching the innermost regions of the active galactic nuclei, black hole X-ray binaries, young stellar objects (YSOs), symbiotic objects with white dwarfs and compact binaries with neutron stars, but the detailed launching mechanism is still not known in any of the cases. Although the difference in scales is huge, similarities between the jets indicate possible common mechanism, but for any such claim, more work is needed for each particular class of objects. Understanding of jet launching and propagation is a crucial input for the description of evolution of objects at all scales, as it determines the mixing of material in the interstellar as well as intergalactic scales. One-sided outflows with complex magnetic fields were studied in Lovelace et al. 2010 ; Romanova et al. 2014 . We find asymmetric launching of outflows with dipole stellar magnetic field. In Čemeljić 2019 we devised a setup for simulations of star-disk magnetospheric interaction, based on Zanni & Ferreira 2009 ; Zanni & Ferreira 2013 . We confirmed their results, which corroborated findings in Romanova et al. 2009 . In a parameter study for the thin accretion discs around slowly rotating stars, we studied stars rotating up to 20% of the Keplerian rotational rate at the stellar equator ( Čemeljić & Brun 2023 ) . We also investigated midplane backflow in such discs ( Mishra et al. 2023 ) and initially probed the effects of geometries of the stellar field different from dipolar ( Cieciuch & Čemeljić 2022 ) . Here we extend our simulations to the faster rotating stars, in which we obtain axial outflows of different mass loads and velocities in opposite directions, above and below the disk midplane. By presenting different axial outflows from one and the same kind of object such results provide information about the influence of local environment and magnetic field strength and geometry on the launching of outflows. Such axial outflows would play an important role in the large scale jet launching mechanism. In the following Section 2 we describe our numerical setup, with overview of the results in Section 3 and conclusions in Section 4 . 2 Numerical setup We perform 2D axisymmetric star-disk simulations with the publicly available PLUTO code ( Mignone et al. 2007 ) and setup as in Čemeljić 2019 , only that now we compute in a complete \theta\in[0,\pi] co-latitudinal plane. This way we do not prescribe the disk mid-plane as a boundary condition, but evolve the equations in the complete disk self-consistently. Here we work with the resolution R\times\theta=[125\times 100] grid cells in a physical domain reaching the radius of 50 stellar radii, R\in[1,50]R_{\star} , with a logarithmically stretched radial grid in spherical coordinates (R,\theta,\varphi) . We chose the larger, almost double radial extension of the physical domain than was used in Čemeljić 2019 , to ensure a larger stability of the flow and less influence of the outer radial boundary. The overall resolution is lower than in the previous simulations, but with our choice of the logarithmically stretched radial grid, the innermost part of the magnetosphere is still well resolved. We checked that the results are qualitatively similar to the corresponding simulations in the larger resolution. The disk is set up following Kita 1995 ; Kluzniak & Kita 2000 , with the addition of a hydrostatic, initially non-rotating corona ( Čemeljić et al. 2023 ) above the rotating star and a dipole moment of the stellar field parallel with the stellar rotation axis. The viscosity and resistivity are parameterized by the Shakura-Sunyaev prescription, with the anomalous viscous and resistive dissipative coefficients \alpha_{\rm v} and \alpha_{\rm m} . Much larger than their microscopic counterparts, such diffusive coefficients are free parameters in the simulation. They are motivated by the assumption that dissipation is a result of macroscopic instabilities, i.e., turbulence ( Shakura & Sunyaev 1973 ; Balbus & Hawley 1991 ) . A condition for inclusion of the diffusive term is defined by \beta=P_{\rm mag}/P_{\rm hyd}>0.5 , meaning that the magnetic pressure is prevailing. Where this inequality is not satisfied, the diffusive terms are set to zero. For maintaining the divergence-less magnetic field we use the constrained transport method. The magnetic field we set using the split-field approach, in which only changes from the initial stellar magnetic field are evolved in time ( Tanaka 1994 ; Powell et al. 1999 ) . We use the second-order piecewise linear reconstruction, with a Van Leer limiter in density and a minmod limiter in pressure and velocity, RK2 time stepping, and modified Roe solver. The solver modification is such that flags in the flag_shock subroutine do not switch in the presence of shocks, except when the internal energy becomes lower than 1% of the total energy. In our setup, all the viscous heating is locally radiated away from the disk. We use the polytropic equation of state with the plasma polytropic index \gamma=5/3 . To avoid issues with the midplane backflow in the disc ( Mishra et al. 2023 ) , we perform simulations with the anomalous viscosity coefficient \alpha_{\rm v}=1 , in which there is no such backflow. 3 Asymmetric axial outflows Figure 1: Momentum flux in a logarithmic color grading in a snapshot at t=250 P_{\star} from our simulation with the stellar magnetic field B ⋆ =250 G, stellar rotation rate \Omega=0.5\Omega_{\rm br} and the resistivity coefficient \alpha_{\rm m}=0.4 . Normalization of the velocity vectors in the disk (blue arrows) is two hundred times the velocity in the magnetosphere outside of the disk (black arrows), as the velocity in the disk is much smaller. With white solid lines is shown a sample of the magnetic field lines. Time is measured in the number of stellar rotations at the equator, P ⋆ , and momentum is measured in the code units. Figure 2: Analysis of the result from Fig. 1 . All the values are evaluated at the distance 25R \star . Left panel : poloidal ( V_{\rm p} ) and azimuthal (V φ ) components of the axial outflow velocities, in the units of Keplerian velocity at the stellar equator. Velocities of the outflow above the disk midplane are shown with blue, and of the outflow below the disk midplane with the red lines. Right panel : mass flux in the outflows and disk, during the whole simulation, in the units of 10^{-7}M /y. With the black solid line is shown the mass flux through the disk, and with blue and red dashed

Read the complete text