Anisotropy analysis of bamboo and tooth using 4-angle polarization micro-spectroscopy
Meguya Ryu 1,2 , Hsin-Hui Huang 3 , Jitraporn Vongsvivut 4 , Soon Hock Ng 3 , Irma Dumbrytė 5 , Donatas Narbutis 6 , Mangirdas Malinauskas 7 , Saulius Juodkazis 3,7,8 , Junko Morikawa 8,9 · 2025
Read Anisotropy analysis of bamboo and tooth using 4-angle polarization micro-spectroscopy by Meguya Ryu 1,2 , Hsin-Hui Huang 3 , Jitraporn Vongsvivut 4 , Soon Hock Ng 3 , Irma Dumbrytė 5 , Donatas Narbutis 6 , Mangirdas Malinauskas 7 , Saulius Juodkazis 3,7,8 , Junko Morikawa 8,9 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-02711.txt.
Introduction
Meguya Ryu and co-authors read the grain of bamboo and teeth with polarized light. Their 2025 paper uses four-angle polarization micro-spectroscopy in the mid-infrared to map how chemical bonds are oriented inside two very different biomaterials: plant cellulose and tooth enamel.
In bamboo slices thinner than a micrometer, the method revealed where a key cellulose bond keeps a steady alignment and where it switches off. The detail reached a few micrometers across cell walls and vascular bundles. In tooth slices, enamel showed clear directional order while dentin did not. Modeling showed the trick can sense the orientation of features ten times smaller than the light spot. The authors offer the technique for reading hidden order in biological materials.
Catalog record
| CREATOR | Meguya Ryu 1,2 , Hsin-Hui Huang 3 , Jitraporn Vongsvivut 4 , Soon Hock Ng 3 , Irma Dumbrytė 5 , Donatas Narbutis 6 , Mangirdas Malinauskas 7 , Saulius Juodkazis 3,7,8 , Junko Morikawa 8,9 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-02711
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Anisotropy analysis of bamboo and tooth using 4-angle polarization micro-spectroscopy Meguya Ryu 1,2 , Hsin-Hui Huang 3 , Jitraporn Vongsvivut 4 , Soon Hock Ng 3 , Irma Dumbrytė 5 , Donatas Narbutis 6 , Mangirdas Malinauskas 7 , Saulius Juodkazis 3,7,8 , Junko Morikawa 8,9 Abstract To investigate the anisotropic properties of biomaterials, two distinct classes are considered: polymer-based (e.g., cellulose in plants) and crystalline-based (e.g., enamel in teeth), each demonstrating distinct structural and functional characteristics. Four-angle polarization (4-pol.) spectral mapping of sub-1 μ \mu m bamboo slices was carried out in the mid-IR spectral range (2.5-20 μ \mu m) to reveal the 3D organization of the chemical bonding of cellulose using the key characteristic absorption bands associated with C-O-C and C-N vibrational modes. The longitudinal and transverse microtome slices revealed a switch between the presence and absence of dichroism in parenchyma cell walls and vascular bundles. The cell wall showed continuous alignment of the C-O-C stretching vibrational mode (8.6 μ \mu m/1163 cm -1 ) down to the pixel resolution of ∼ 4 μ \sim 4~\mu m (the step size in imaging) in the transverse slice; the cell wall thickness is ∼ 1 μ \sim 1~\mu m. Thin microtomed slices of a tooth were measured in transmission and reflection modes. The single-point reflection measurements, performed using two perpendicular orientations, revealed orientational anisotropy in the enamel, which was absent in the dentin region. High sub-diffraction limited lateral resolution was numerically validated using a simplified-model of a Gaussian beam reading out material pixels with a defined orientation of absorption. It is shown that the orientation of small ∼ λ / 10 ≈ 1 μ \sim\lambda/10\approx 1~\mu m objects can be revealed using a focal spot of ∼ λ / N A ≈ 20 μ \sim\lambda/NA\approx 20~\mu m, defining the diffraction limit for the objective lens with a numerical aperture N A ≈ 0.5 NA\approx 0.5 . I Introduction The main component of bamboo is cellulose, which is organized into complex 3D hierarchical arrangements, defining its mechanical and thermal properties [ 1 ] . The anisotropy of any material is linked to the orientation and alignment of building blocks down to the microscopic or molecular level. Orientation patterns in bamboo cellulose are an active field of research, and polarization-based techniques are implemented [ 2 ] . In the 0.2-1 THz spectral region, bamboo has a refractive index of \sim 1.4 and absorption coefficient of \sim 10~ cm -1 , with strong birefringence \Delta n\sim 0.05 at the orientations along and across fibers [ 3 ] . It has been used to create THz polarization optics, e.g., a \lambda/4 -waveplate for the linear to circular polarization conversion at \sim 300~\mu m wavelength (1 THz) [ 3 ] . Anisotropy in temperature diffusivity of nano-cellulose fibers doped starch–polyurethane nanocomposite films was directly measured, showing a twofold difference in-plane \alpha_{\parallel}=2.12\times 10^{-7} m 2 /s and out-of-plane \alpha_{\perp}=1.13\times 10^{-7} m 2 /s [ 4 ] . The determination of anisotropies in optical, mechanical, and thermal properties is interlinked; for example, the refractive index is related to mass density, hence the birefringence to its gradient. One of the simplest, non-contact modes of material characterization is optical polarization-based analysis, e.g. using four polarization angles, which has now matured to cover a wide range of wavelengths from UV to THz. Recently, volumetric imaging to determine the 3D orientation of cellular structures was proposed using polarization-resolved light-sheet photoluminescence [ 5 ] . Figure 1: Optical images of the ultra-thin bamboo microtome (Leica EM UC6) sub-wavelength slices in transverse (a) and longitudinal (b) orientations. The bamboo sample was obtained from an ordinary chopstick. See the higher resolution images of the transverse cross-section in Fig. A1 . Tooth enamel has a complex microstructure that plays an important role in protecting the underlying dentin and pulp [ 6 , 7 ] . It is the most mineralized tissue in the human body, consisting of 95 wt.% mineral (in mature enamel), 1 wt.% organic matrix (proteins), and 4 wt.% water [ 8 ] . On the microstructural level, the mineral (inorganic) component consists of crystal rods, also referred to as prisms, with each rod made up of bundles of nanometer-scale carbonated hydroxyapatite crystals, which are \sim 25 nm thick, \sim 100 nm wide, and \geq 100 nm long [ 9 , 10 ] . The rods extend approximately perpendicular from the dentin-enamel junction to the tooth’s surface [ 11 ] . However, looking in more detail, the orientation of enamel rods varies depending on their location: in the outer enamel (closest to the tooth’s surface), the rods are arranged in a nearly parallel manner, whereas in the region near the dentin-enamel junction, they form groups with oblique orientations [ 9 , 12 ] . The distinctive microstructure of enamel, along with the spatial arrangement of its mineral and organic components, contributes to its mechanical properties, including high fracture toughness and resistance to crack propagation [ 9 , 7 , 6 , 13 ] . Enamel exhibits all the characteristics of an anisotropic material, i.e. its mechanical properties such as hardness ( \sim 3 - 6 GPa), elastic modulus (70 - 120 GPa), and brittleness vary depending on the location, chemical composition, and arrangement patterns of the enamel rods [ 11 , 14 , 10 , 15 ] . Studies have found that the hardness and elastic modulus of enamel increase with distance from the dentin-enamel junction: enamel near the surface of the tooth possesses the highest hardness and elastic modulus [ 11 ] . In terms of absolute distance from the dentin-enamel junction, the highest gradient in these mechanical properties was observed within the cervical region [ 11 ] . The chemical components and degree of mineralization, along with the location, play an important role in the mechanical properties of the enamel [ 14 , 16 ] . Both hardness and elastic modulus are positively correlated with calcium content [ 14 , 17 ] . When hypomineralized enamel was examined, significant reductions in hardness and elastic modulus were observed, with a relatively minor decrease in mineral content [ 18 , 19 ] . Calculations showed that a 3 GPa reduction in the elastic modulus could be expected with a 1% reduction in the volume concentration of hydroxyapatite [ 20 ] . Finally, the mechanical properties of the enamel vary depending on the orientation of the rods, the arrangement of hydroxyapatite crystals within each rod, and their position along the length of the rod [ 11 , 17 , 21 ] . For teeth structure analysis at the micro- and even nano-scale, more sophisticated techniques such as synchrotron X-ray tomography [ 22 , 23 ] can be employed. Some steps have already been taken in this direction, using synchrotron X-ray tomography to assess enamel demineralization in caries lesions in 3D [ 22 ] , and to analyze the inner enamel during acid exposure [ 23 ] . A time-lapse imaging sequence was created by repeatedly scanning to detect changes in enamel structure due to acids [ 23 ] . Although enamel anisotropy plays a crucial role in the tooth’s mechanical strength, its accurate assessment at the micro- and