Sampling the spatial coherence of light

M. Vitek, M. Peterek, D. Koutný, M. Paúr, L. Motka, B. Stoklasa, Z. Hradil, J. Řeháček, L. L. Sánchez-Soto · 2025

Read Sampling the spatial coherence of light by M. Vitek, M. Peterek, D. Koutný, M. Paúr, L. Motka, B. Stoklasa, Z. Hradil, J. Řeháček, L. L. Sánchez-Soto (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-02031.txt.

Introduction

Vitek and co-authors wrote a paper from 2025 on a new job for a classic optics sensor: measuring how coherent a light signal is. The Hartmann sensor normally maps wavefronts through an array of small apertures. The team draws a formal parallel between the coherence matrix of light and the density matrix of a quantum state. That parallel recasts the sensor's reading as a quantum estimation problem. In lab tests, the sensor extracted coherence information even where aperture signals overlap strongly, where standard wavefront sensing gives up.

Catalog record

CREATORM. Vitek, M. Peterek, D. Koutný, M. Paúr, L. Motka, B. Stoklasa, Z. Hradil, J. Řeháček, L. L. Sánchez-Soto
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-02031

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Sampling the spatial coherence of light M. Vitek, M. Peterek, D. Koutný, M. Paúr, L. Motka, B. Stoklasa, Z. Hradil, J. Řeháček, L. L. Sánchez-Soto Abstract We introduce a novel application of the Hartmann sensor, traditionally designed for wavefront sensing, to measure the coherence properties of optical signals. By drawing an analogy between the coherence matrix and the density matrix of a quantum system, we recast the sensor operation as a quantum estimation problem. We experimentally demonstrate its effectiveness in the regime where signals from different apertures significantly overlap, enabling information extraction beyond the reach of standard wavefront sensing. I Introduction Three-dimensional objects radiate complex wavefronts shaped by their intrinsic properties, such as geometry, refractive index, density, and temperature. These wavefronts carry critical information about the emitter, yet conventional detectors are limited to capturing only two-dimensional intensity and lack sensitivity to phase variations. As a result, wavefront sensing becomes essential for reconstructing the full optical field, enabling a deeper understanding of the object structure and behavior. This capability is crucial in applications such as high-resolution imaging Wu et al. 2019 ; Hampson et al. 2021 , ophthalmology Maeda 2001 ; Dai 2008 ; Vacalebre et al. 2022 , optical testing Malacara 2007 , beam shaping Mosk et al. 2012 ; Yu et al. 2015 adaptive optics Tyson and Frazier 2022 ; Fernandez 2024 , and precision metrology Rastogi 1997 , where extracting phase information provides insights beyond what intensity-based measurements alone can offer. Wavefront reconstruction can be accomplished through several distinct approaches, each with its own strengths and limitations Geary 1995 . Broadly, these methods fall into three primary categories: (a) interferometric techniques, which rely on the interference of two beams with a carefully controlled relative phase; (b) methods based on the determination of the wavefront’s slope or curvature; and (c) image-based approaches utilizing iterative phase-retrieval algorithms Luke et al. 2002 ; Guo et al. 2022 . While substantial progress has been made in this area, achieving robust wavefront sensing remains a challenging problem. Among the various schemes for wavefront reconstruction, the time-honored Shack-Hartmann sensor surely deserves special recognition. The original design incorporated a Hartmann mask, consisting of a regular array of pinholes Hartmann 1900 . In the late 1960s, Shack revolutionized the design by introducing lens arrays, greatly enhancing the sensor sensitivity Platt and Shack 2001 . With its dynamic range, high optical efficiency, compatibility with white light, and versatility in handling both continuous and pulsed sources, this setup has proven to be an exceptional solution for a variety of applications Neal et al. 2002 . The operation of a Hartmann sensor may at first seem intuitively straightforward Primot 2003 . The wavefront is sampled by an array of pinholes, producing a corresponding set of spots on the recording plane. The local slope of the wavefront at each sample point is inferred from the direction in which most of the light emerges from the respective pinhole—specifically, from the position of the resulting spot. However, this simplified geometrical framework inherently assumes the presence of a well-defined wavefront, implying full coherence of the signal. Furthermore, it requires that the spots remain non-overlapping. However, emerging applications in fields such as lithography Kazazis et al. 2024 , optical microscopy Booth 2014 , and holography Peng et al. 2021 demand the measurement of signals with increasingly complex temporal and spatial mode structures. In these scenarios, conventional wavefront-sensing strategies prove inadequate, as they are designed to handle spatially coherent signals. It has been suggested Hradil et al. 2010 ; Stoklasa et al. 2014 that conventional wavefront sensors may be underrated, as they do not fully exploit the potential of the recorded data. By incorporating tomographic reconstruction techniques, Shack-Hartmann sensors could facilitate the evaluation of the mutual coherence, thus enabling a complete characterization of the signal. In this paper, we build upon our previous work by incorporating a digital micromirror device (DMD) as an addressable reflective mask in the sensor. Although DMDs are limited to binary amplitude modulation, their rapid and reliable modulation capabilities have enabled a wide range of applications Ren et al. 2015 ; Scholes et al. 2019 . Recently, they have been explored for characterizing the spatial coherence through interferometric techniques Partanen et al. 2014 ; Magalhães et al. 2021 ; Shirai and Friberg 2021 . However, this approach is limited to assessing the complex degree of coherence, as it relies on measuring a visibility. We expand the scope of this framework to achieve point-by-point sampling of the mutual coherence. By leveraging quantum estimation theory Helstrom 1976 , we surpass the limitations of conventional wavefront sensors, extracting information beyond standard reconstruction methods. This is more than an academic curiosity, as spatial coherence plays a vital role in various applications Korotkova and Gbur 2020 . This paper is organized as follows. In Sec. II we briefly review the essential ingredients needed to describe partially coherent light and rephrase the action of a Hartmann sensor in a quantum parlance that will prove useful for the remaining discussion. This is applied in Sec. III to devise a feasible DMD-based protocol that allows for the sampling of the mutual intensity. The experimental results are presented in Sec. IV , confirming the reconstruction of the coherence properties of the signal. Finally, our conclusions are summarized in Sec. V . II Sampling the mutual intensity Partially coherent light cannot be adequately described by intensity or complex amplitude alone. Instead, its properties must be captured through correlation functions, with the second-order correlation (commonly known as the mutual coherence function) being the most commonly used Mandel and Wolf 1995 . To simplify our discussion, we will restrict ourselves to the quasimonochromatic regime, where this correlation reduces to the so-called mutual intensity, J(\mathbf{x},\mathbf{x}^{\prime})=\langle u(\mathbf{x},t)u^{\ast}(\mathbf{x}^{\prime},t)\rangle\,, (1) with u(\mathbf{x},t) representing the complex amplitude. Assuming u(\mathbf{x},t) is an ergodic random process, J becomes time independent, allowing the ensemble average \langle\cdot\rangle to be replaced by a time average. The sensors we are considering here operate by dividing the incoming light wavefront into smaller sections. This is achieved through an array of holes (in a Hartmann sensor) or lenslets (in a Shack-Hartmann sensor), each directing light onto a detector. For a perfectly flat (planar) wavefront, all the spots align in a regular grid, forming the reference spot field. When the wavefront is distorted by aberrations, its curvature changes, creating small tilts in different regions. These tilts cause the positions of the image spots to shift. By comparing the shifted positions to their original locations in the reference spot field, we can determine the wavefront shape and any aberrations in the beam. By analyzing the entire pupil, this information is combined into a phase map, which reveals the wavefront structure Tyson and Frazier 2022 . Unfortunately, as heralded in the Introduction, when dealing with partially coherent light, this naive picture breaks down, as the concept of a single, well-defined wavefront becomes ambiguous. In a standard wavefront configuration, the setup is carefully arranged to prevent overlapping spots. This enables the reconstruction of a putative wavefront, but precludes the measurement of spatial coherence. In contrast, we explore an alternative scenario, where signals are deliberately overlapped. This distinctive setup fosters mutual interference among signals from the subapertures, thereby encoding valuable coherence

Read the complete text