Multi-actuator lens systems for turbulence correction in free-space optical communications Journal: opticajournal Publication type: Research Article
Matteo Schiavon, 1,* Antonio Vanzo, 2,* Kevin Campaci, 2 Valentina Marulanda Acosta, 1,3 and Stefano Bonora 2 · 2025
Read Multi-actuator lens systems for turbulence correction in free-space optical communications Journal: opticajournal Publication type: Research Article by Matteo Schiavon, 1,* Antonio Vanzo, 2,* Kevin Campaci, 2 Valentina Marulanda Acosta, 1,3 and Stefano Bonora 2 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-01817.txt.
Introduction
Turbulence in the air blurs free-space optical links, and Matteo Schiavon and co-authors test two lens systems to correct it in a 2025 paper. Free-space channels serve both classical and quantum communication. For fiber-coupled receivers, shifts in the refractive index cause strong swings in the power that enters a single-mode fiber, so adaptive optics are needed to fix the induced aberrations.
One system uses a fast-steering prism to correct tip and tilt. The second uses a multi-actuator deformable lens that can correct up to third order in Zernike terms. Both were tested at telecom wavelength, with artificial turbulence in the lab and on a real free-space channel. Both raised the fiber coupling efficiency.
Catalog record
| CREATOR | Matteo Schiavon, 1,* Antonio Vanzo, 2,* Kevin Campaci, 2 Valentina Marulanda Acosta, 1,3 and Stefano Bonora 2 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 17 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-01817
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Multi-actuator lens systems for turbulence correction in free-space optical communications Journal: opticajournal Publication type: Research Article Matteo Schiavon, 1,* Antonio Vanzo, 2,* Kevin Campaci, 2 Valentina Marulanda Acosta, 1,3 and Stefano Bonora 2 Abstract The implementation of efficient free-space channels is fundamental for both classical and quantum Free-Space Optical (FSO) communication. This can be challenging for fibre-coupled receivers, due to the time variant inhomogeneity of the refractive index that can cause strong fluctuations in the power coupled into the Single-Mode Fiber (SMF), and requires the use of Adaptive Optics (AO) systems to correct the atmospheric induced aberrations. In this work, we present two adaptive optic systems, one using a Fast-Steering Prism (FSP) for the correction of tip-tilt and a second one based on a Multi-Actuator deformable Lens (MAL), capable of correcting up to the third order of Zernike’s polynomials. We test both systems at telecom wavelength both with artificial turbulence in the laboratory and on a free-space channel, demonstrating their effectiveness in increasing the fibre coupling efficiency. 1 Introduction Free-Space Optical (FSO)communication presents some undeniable advantages with respect to Radio Frequency (RF)links for the implementation of point-to-point communication, in terms of both transmission efficiency and security. The high frequency of optical beams leads to high speed modulation, allowing higher data rates, and low beam divergence, which maximizes the power intercepted by the legitimate receiver, increasing both transmission efficiency and security. The use of optical frequencies can also been exploited for the use of Quantum Key Distribution (QKD), which allows the exchange of secret keys with unconditional security [ 1 ] . The importance of high speed communication justifies the effort for the development of new devices and techniques for pushing the communication towards its fundamental limits [ 2 ] . This research is mainly focused on fibre systems, which means that the most performing communication devices are based on Single-Mode Fiber (SMF)technology and work at telecom wavelength. For the cases where the installation of optical fibres is not possible, for geographic or economic reasons, FSOcommunication represents a good alternative [ 3 ] . However, the free space channel is affected by atmospheric turbulence, which severely decreases the Coupling Efficiency (CE)into the SMF. This requires the use of Adaptive Optics (AO)for partially compensating the effects of the turbulence and increasing the amount of light coupled into the fibre [ 4 , 5 , 6 , 7 , 8 , 9 , 10 ] . The working principle of AOsystems consists in measuring wavefront aberrations and correcting it using active optical elements [ 11 ] . The typical AOsystem works using reflecting elements, such as a Fast-Steering Mirror (FSM)for the correction of the first order of the turbulence (tip-tilt) and a Deformable Mirror (DM)for the correction of higher orders. The use of transmitting elements, on the other hand, could open the way to more compact systems, which represents a very promising feature for FSOsystems. The use of a Multi-Actuator deformable Lens (MAL)for coupling into a SMFhas already been demonstrated in visible wavelengths [ 12 ] . However, the use of such devices for FSOcommunication requires a study of its performance at telecom wavelength, in which high-speed telecommunication devices work. In this article, we investigate the performance of two different AOsystems, based on transmitting devices, which work at telecom wavelength. The first system is based on a Fast-Steering Prism (FSP)and can correct the first order of the turbulence (tip-tilt). The second system uses a MAL, which is capable of correcting up to the fourth order of the turbulence. Both systems are tested using induced atmospheric turbulence in the laboratory, and the performance of the second one is also assessed on a 100-m ground-to-ground free-space channel. 2 Materials and methods 2.1 The fast-steering prism The optical setup used to test the performance of the FSPis shown in Figure 1 . Figure 1: Optical setup used for the test of the FSPin the laboratory. A laser diode (LD) at telecom wavelength \lambda=1550\,nm (MMC-GASPFP-V Mini Media Converter), coupled to a SMFof numerical aperture NA=0.14 and mode field diameter MFD=10.4\,\mu m , is collimated into a beam of diameter 50.8\,mm (Rayleigh length z_{R}>1.6\,km ) using a lens of focal length 300\,mm (L1). The beam is propagated on the optical bench for a distance of around 2\,m , with an electric heater (HEAT) placed in the middle of the path to generate the turbulence. The beam is collected by the receiving telescope, consisting of a lens of diameter 50.8\,mm and focal length 300\,mm , which focuses it into a SMF( NA=0.14 , MFD=10.4\,\mu m ). The FSPis placed between the lens L2 and the fibre, before an unbalanced beam-splitter (BS) that sends 70\% of the light to the fibre and 30\% to a Short-Wave InfraRed (SWIR)camera (CAM). The camera (FirstLight C-RED 2 Lite) has a full-frame rate of 600\,FPS and is linked to the control computer (PC) using a USB 3.0 connection. The images are processed by the Dynamics Optics PhotonLoop software [ 13 ] , that calculates the position of the centroid and uses it as an error signal to calculate the voltage to apply to the FSPthrough a Piezo Stack driver (Dynamic Optics srl). The FSP, developed at the CNR-IFN laboratory [ 14 ] , is composed of two glass windows with a dielectric gel in-between. Glass surfaces are uncoated for a total transmittance of about 85\% . The first window is fixed, while the second one can be tilted by 3 amplified piezoelectric actuators. The prism has a clear aperture of diameter 23\,mm and it can reach up to \pm 2.2\,mrad of optical tilt. The head of the fibre is mounted on a manual x-y stage and its position along the optical axis is controlled by a motorized translation stage. The power collected by the fibre is measured by a photodiode (Thorlabs DET01CFC, PD), whose output, on a 100\,k\Omega load, is read using a National Instruments USB-6009 Analog-to-Digital Converter (ADC). The CEis measured as the ratio between the power read by the photodiode and the power before the fibre, measured using a powermeter. 2.2 The multi-actuator lens The MALis tested using the optical setup shown in Figure 2 . Figure 2: Optical setup used for the test of the MALin the laboratory. The transmitting system used for testing the performance of the MALis equal to the one described in Section 2.1 , producing a collimated beam of diameter 50.8\,mm that propagates on top of an electric heater. The receiving system is a Keplerian telescope, composed of a first lens of diameter 50.8\,mm and focal lengths 300\,mm (L2) and a second lens of focal length 60\,mm (L3), that reduces the diameter of the beam to 10.2\,mm . The MALis positioned at the point conjugate to L2, 74\,mm behind L3. After the MAL, an unbalanced beam-splitter sends 10\% of the light towards the Wave-Front Sensor (WFS)and 90\% of the light towards the SMF. The WFSis a Shack-Hartmann built using a SWIRcamera (FirstLight C-RED 2 Lite), with full-frame rate 600\,FPS , and an array of 6 by 6 microlenses with a focal length of about 5.6\,mm and a pitch of 250\,\mu m . The WFSis placed after a second Keplerian telescope with lenses of focal length 300\,mm (L4)