A computational framework for evaluating tire-asphalt hysteretic friction including pavement roughness

Ivana Ban, Jacopo Bonari, Marco Paggi · 2025

Read A computational framework for evaluating tire-asphalt hysteretic friction including pavement roughness by Ivana Ban, Jacopo Bonari, Marco Paggi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-01511.txt.

Introduction

Ivana Ban, Jacopo Bonari, and Marco Paggi build a computing frame to evaluate friction between tires and asphalt, including road roughness, in a 2025 paper. Road surface texture is captured by a photogrammetry method that builds three-dimensional surface models. The question is whether simple roughness measures match detailed simulated friction.

Texture parameters are computed from the surface profiles. Contact simulations use a finite element scheme where roughness is built into special interface elements. Across scenarios, the roughness measures showed a notable trend with simulated friction. The authors see promise for predicting friction performance from surface scans, which could aid road safety work.

Catalog record

CREATORIvana Ban, Jacopo Bonari, Marco Paggi
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE75 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-01511

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A computational framework for evaluating tire-asphalt hysteretic friction including pavement roughness Ivana Ban, Jacopo Bonari, Marco Paggi Abstract Pavement surface textures obtained by a photogrammetry-based method for data acquisition and analysis are employed to investigate if related roughness descriptors are comparable to the frictional performance evaluated by finite element analysis. Pavement surface profiles are obtained from 3D digital surface models created with Close-Range Orthogonal Photogrammetry. To characterize the roughness features of analyzed profiles, selected texture parameters were calculated from the profile’s geometry. The parameters’ values were compared to the frictional performance obtained by numerical simulations. Contact simulations are performed according to a dedicated finite element scheme where surface roughness is directly embedded into a special class of interface finite elements. Simulations were performed for different case scenarios and the obtained results showed a notable trend between roughness descriptors and friction performance, indicating a promising potential for this numerical method to be consistently employed to predict the frictional properties of actual pavement surface profiles. Keywords pavement roughness \cdot digital surface models \cdot photogrammetry \cdot hysteretic friction \cdot finite elements \cdot viscoelasticity 1 Introduction Pavement surface friction is one of the key functional properties that guarantees safe driving conditions. It affects the contact interface between vehicle tire and asphalt pavement, providing vehicle stability while steering and grip during the braking maneuver [ 1 ] . It is quantified by the coefficient of friction, a dimensionless number indicating the ratio between the tangential and the normal force. An important feature in friction phenomenon is the limited portion of the interface where the contact actually takes place, a quantity highly affected by the roughness properties of the surface [ 2 ] . A close look at most of natural and artificial surfaces reveals a rough topology, that determines a true contact area smaller than it would be experienced for an idealized smooth contact. This feature directly affects the value of the resulting friction coefficient [ 3 ] . Asphalt pavement surface manifests roughness at many scales of observation, each characterized by several different scales of specific amplitude and wavelength, which in turn are connected to functional pavement properties [ 1 ] . The macro scale of pavement surface texture, or macro-texture, is usually defined within an amplitude ranging from 0.1\,$\mathrm{mm}$ to 20\,$\mathrm{mm}$ and a wavelength ranging from 0.05\,$\mathrm{mm}$ to 50\,$\mathrm{mm}$ . This texture scale is relevant for tire-asphalt interaction and is considered as the governing parameter for functional properties like friction for speeds above 50\,$\mathrm{km}$ , aquaplaning, noise, and splash or spray effects. Micro-texture scale is the smallest texture scale for pavements, with defined amplitude limits of 0.001\,$\mathrm{mm}$ to 0.05\,$\mathrm{mm}$ and wavelengths below 0.5\,$\mathrm{mm}$ . Micro-texture results from the properties of the aggregate grain material and its morphology is responsible for low speed friction and vehicle tire wear [ 1 ] . An important consideration when dealing with pavement friction is related to the material properties of the bodies in contact. For the inelastic materials employed in tires production, rubber friction theory recognizes that the frictional force results from two distinct phenomena, adhesion and hysteresis, that make a different contribution whose combination results in the overall frictional response. Adhesion results from inter-molecular contact between different materials through Van der Waals dipole forces [ 4 , 5 ] , and is highly dependent on the true contact area size. Hysteresis is a loss of energy that takes place in rubber materials during deformation and recovery. When such a material is stretched and then released, it does not immediately return to its original shape; instead, some of the energy is dissipated as heat due to internal friction within its polymer chains. The energy loss determines a lag between the applied force and the rubber’s response that in turn causes a significant change in the interface contact forces, finally leading to the arousal of tangential forces opposing the sliding motion [ 6 ] . Important contributors to hysteretic friction are sliding speed and rubber temperature [ 1 ] . The non-conforming rough interface between rigid pavement surface and tire rubber makes the true contact area a-priori unknown, and its value varies during the sliding motion, which renders the problem of rubber sliding over a rough profile as highly non-linear [ 7 ] . Given the problem complexity, no closed form expressions can be derived to predict the rubber coefficient of friction. To tackle the problem, numerical methods are usually exploited to model rough contact problems including friction. In the research community, two wide spread and well-established methods are usually exploited: the finite element method (FEM) [ 8 ] and the boundary element method (BEM) [ 9 ] , each characterized by their own strengths and weaknesses. FEM requires discretization of the whole domain, including the interior, while BEM, only requires discretization of the boundaries of the domain, thus reducing the dimensionality of the problem. BEM is often more efficient for problems with infinite or semi-infinite domains, since it reduces the number of elements needed. On the other hand, BEM is mostly restricted to simple material laws and geometries, mostly in a small displacement setting. Quite the opposite, FEM is better suited for complex, non-linear, or multi-material problems because it can easily handle a variety of diverse material properties and complex geometries, though more computationally demanding. Given its characteristics, numerical solutions of pavement-tire interaction problems in the context of friction analysis are most commonly observed within a FEM framework. The physical problem is simulated by modeling the contact between vehicle tires or vehicle tires subsets and the pavement structure [ 10 ] . Modeling of vehicle tire load requires the discretization of the full tire or of a representative sample, the definition of the specific viscoelastic material model, and often includes anisotropic effects due to the different stiffness of tire constituent materials, i.e., tire rubber and inner embedded steel belt, and specification of loading scenario [ 11 ] . Pavement structure modeling requires the discretization of both surface and bulk, which is more complex if surface roughness is accounted in its actual form and not simplified. Furthermore, asphalt pavement is characterized as well by a viscoelastic rheology and even though it is mostly considered rigid in comparison to the tire, an adequate material constitutive law also for the pavement can be taken into account in pursuit of a more realistic modeling approach [ 12 ] . In the course of the years, FEM analysis of tire-pavement interaction in terms of frictional behavior has been investigated from different research angles. The FEM framework was exploited for the prediction of friction performance to derive the so-called NUS skid resistance model [ 13 ] . The NUS model is a theoretical model for pavement skid resistance which uses solid mechanics and hydrodynamic theories developed by National University of Singapore (NUS) research group. The model solved the coupled tire-fluid-pavement interaction problem assuming a Coulomb friction law to model the frictional behavior of the system and the Navier-Stokes equations equipped with a standard k-\varepsilon turbulent model to describe the fluid dynamics. However, the work does not consider the influence of pavement surface morphology on the resultant forces, but rather only the influence of the water film thickness and applied sliding speed. Concurrently, [

Read the complete text