ℤ 2 \mathbb{Z}_{2} topological invariants from the Green function’s diagonal zeros

Florian Simon, Corentin Morice · 2025

Read ℤ 2 \mathbb{Z}_{2} topological invariants from the Green function’s diagonal zeros by Florian Simon, Corentin Morice (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-00800.txt.

Introduction

Some materials are topological insulators, conducting only on their skin, and a two-valued label says which kind a crystal is. Florian Simon and Corentin Morice find a visual way to read that label in a 2025 paper. Their tool is the Green function, the standard map of how electrons move through a crystal.

The zeros of that function's diagonal entries, plotted across momentum space, draw a surface of crossings. In two-band models with inversion symmetry, that surface splits the special momentum points into two camps by parity, and counting the camps yields the strong and weak labels at a glance. Three-band systems behave the same way, with one exception that echoes the known quirks of fragile topology. The authors offer the picture as a direct, eye-friendly route to invariants that are usually computed blind.

Catalog record

CREATORFlorian Simon, Corentin Morice
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE44 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-00800

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

ℤ 2 \mathbb{Z}_{2} topological invariants from the Green function’s diagonal zeros Florian Simon, Corentin Morice Abstract Résumé We investigate the relationship between the analytical properties of the Green’s function and ℤ 2 \mathbb{Z}_{2} topological insulators, focusing on three-dimensional inversion-symmetric systems. We show that the diagonal zeros of the Green’s function in the orbital basis provide a direct and visual way to calculate the strong and weak ℤ 2 \mathbb{Z}_{2} topological invariants. We introduce the surface of crossings of diagonal zeros in the Brillouin zone, and show that it separates time-reversal invariant momenta (TRIMs) of opposite parity in two-band models, enabling the visual computation of the ℤ 2 \mathbb{Z}_{2} invariants by counting the relevant TRIMs on either side. In three-band systems, a similar property holds in every case except when a trivial band is added in the band gap of a non-trivial two-band system, reminiscent of the band topology of fragile topological insulators. Introduction The ubiquitous presence of topological states in matter, and its permeation into much of condensed matter physics [ 33 , 60 , 55 , 24 , 18 , 30 , 31 , 16 , 15 , 17 , 3 , 24 , 8 , 50 , 41 , 7 , 77 ] , contrasts with the ill-adaptation of its theoretical framework to the physical reality it describes. Indeed, topological band theory remains based on non-interacting Bloch systems, is limited to zero temperature, and cannot fully take into account the effects of electronic correlations. Moreover, direct measurements of topological invariants remain unavailable, forcing the field to rely heavily on ab-initio calculations whose calculated invariants are inaccurate even in some simple cases [ 63 , 1 ] . These limitations motivated early on the calculation of topological invariants in more advanced formalisms [ 40 ] , in particular using Green’s functions, which can be closely related to experimental results. Topological field theory yielded expressions which are difficult to use in practice, involving integrals of products of Green’s functions [ 64 , 78 , 20 , 45 , 65 , 70 , 69 , 46 , 23 , 67 , 68 , 23 ] , such as the So-Ishikawa-Matsuyama invariant [ 57 , 29 , 36 ] . Further work addressed this problem by defining a topological Hamiltonian, equal to the inverse of the full Green’s function at zero frequency [ 72 , 73 , 71 , 27 , 28 , 74 ] . It can then be used to calculate invariants using the same techniques used for non-interacting systems. Similar approaches involving frequency dependence were also recently developed [ 5 , 34 ] . Another path to the calculation of topological invariants from Green’s functions was opened recently. Research on neutrino oscillations prompted the rediscovery of a mathematical identity relating the eigenvalues of a matrix to its eigenvectors [ 12 , 11 ] . In the case of a Green’s function matrix, this identity involves the zeros of the diagonal components of the Green’s function in the orbital basis. Combining it with a known inequality from Cauchy, it was discovered that, in simple models, these zeros signal the presence of a topological state [ 38 ] . Such zeros can be accessed by directly reading the Green’s function matrix, without any inversion nor diagonalisation, making this approach potentially simpler than the canonical non-interacting techniques when the Green’s function can be readily accessed, for example via experimental measurements. Diagonal zeros were also studied in interacting systems in connection with the topological Hamiltonian [ 62 ] . Different zeros of the Green’s function, namely zeros of its determinant, or equivalently of its eigenvalues, are currently garnering a lot of interest. Caused by divergences of the self-energy and indicative of the breakdown of perturbation theory, they have been related to failures of Green’s function-based topological invariants [ 52 , 56 , 82 , 42 , 6 ] . They can form a surface in reciprocal space called the Luttinger surface [ 13 , 56 , 82 ] , which arises in Mott insulators [ 47 , 66 ] , and could even elucidate the origin of Fermi arcs in the pseudogap phase of cuprate superconductors [ 75 ] . In this work, focusing on three-dimensional inversions symmetric systems, we show that zeros of the diagonal components of the Green’s function in the orbital basis can be used to calculate the \mathbb{Z}_{2} topological invariants. In Sec. I , we briefly review the formalism of diagonal zeros. In Sec. II , we introduce the concept of zeros surface, formed by points of the Brillouin zone where two zeros of the Green’s function cross, and show that in two-band models this surface separates TRIMs of opposite parity, allowing one to visually determine the value of \mathbb{Z}_{2} topological invariants. In Sec. III , we exemplify our findings in a generic toy-model for three-dimensional \mathbb{Z}_{2} topological insulators. Finally, in Sec. IV , we treat the case of three-band systems, and find that the zeros surface can be affected by the addition of trivial bands. I Diagonal zeros and topology For completeness, in this section we review the formalism of the zeros of the diagonal components of the Green’s function in the orbital basis which we call diagonal zeros in the following [ 11 , 38 ] , with revised notations. We then discuss the expression of the Green’s function diagonal components in spin-degenerate band structures and formulate how the diagonal zeros may give access to the value of the \mathbb{Z}_{2} topological invariants. I.1 Notation Let \mathcal{M}_{N}(\mathbb{C}) be the set of N by N complex matrices. For a Hermitian matrix A\in\mathcal{M}_{N}(\mathbb{C}) , we consider the convention in which its eigenvalues are arranged in ascending order, namely \lambda_{1}(A)\leq\lambda_{2}(A)\leq\cdots\leq\lambda_{N}(A) . [A]_{ij}\in\mathcal{M}_{N-1}(\mathbb{C}) denotes the matrix A\in\mathcal{M}_{N}(\mathbb{C}) without its i -th row and j -th column. The eigenvalues of the Hamiltonian H and [H]_{ij} are denoted as \epsilon_{n} and \zeta_{n,ij} , respectively. Finally, for lightness of notation, we will use \zeta_{nj} instead of \zeta_{n,jj} . As we consider systems with both inversion and time-reversal symmetry, the band dispersions are spin-degenerate and we show in Sec. I.3 that the spin degree of freedom is not relevant for our discussion. We therefore consider a spinless Bloch Hamiltonian H represented in an orbital basis (\ket{\phi_1},\ldots,\ket{\phi_N}) 1 1 1 As in Ref. [ 61 ] , we refer to any collection of internal degrees of freedom (spin, orbital, sublattice,..) as an orbital. . In this basis, the Bloch state of the n -th band \ket{u_n} reads \ket{u_n(\bm{k})}=\sum_{j=1}^{N}u_{n}^{(j)}(\bm{k})\ket{\phi_j}, (1) with u_{n}^{(j)}(\bm{k})=\innerproduct{\phi_j}{u_n(\bm{k})}\in\mathbb{C} . In this paper we consider the situation of a tight-binding Hamiltonian, where the orbital states refer to the on-site atomic orbitals, along with the possible sublattice degree of freedom. The orbital parities then correspond to the parity of the atomic orbital. I.2 Formalism We review the formalism of the diagonal zeros, focusing on its three main relations : The zero-pole representation of the Green’s function, the eigenvector-eigenvalue relation, and the Cauchy interlacing inequality. I.2.1 Zero-pole representation of G Let H be a quadratic Hamiltonian. Its retarded Green’s function in frequency space is given by G=\big(\hbar\omega\mathbbm{1}-H\big)^{-1} . Using the relation A\adj(A)=\det(A)\mathbbm{1} with \adj(A)_{ij}=(-1)^{i+j}\det[A]_{ji} the adjugate matrix of A , one gets G_{ij}=(-1)^{i+j}\frac{\det\big([\hbar\omega\mathbbm{1}-H]_{ji}\big)}{\det\big(\hbar\omega\mathbbm{1}-H\big)}, (2) Diagonal components then

Read the complete text