Synthesis of Cobalt Grown from Co-S Eutectic in High Magnetic Fields

Steven Flynn, Caeli L. Benyacko, Matúš Mihalik, Jared Lee, Fuyan Ma, Michael E. Bates, Shubham Sinha, Khalil A. Abboud, Marian Mihalik, Mark W. Meisel, James J. Hamlin · 2025

Read Synthesis of Cobalt Grown from Co-S Eutectic in High Magnetic Fields by Steven Flynn, Caeli L. Benyacko, Matúš Mihalik, Jared Lee, Fuyan Ma, Michael E. Bates, Shubham Sinha, Khalil A. Abboud, Marian Mihalik, Mark W. Meisel, James J. Hamlin (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-00788.txt.

Introduction

Flynn leads a team reporting cobalt grown from a cobalt-sulfur eutectic in high magnetic fields, in a 2025 paper. Crystals were grown in the ferromagnetic state under steady conditions with a sulfide flux. Fields up to the top strength tested were applied during growth.

The isolated cobalt took shapes that stretched more as field conditions changed, from cubes to rods to thin needle-like forms. Stretch direction tracked field direction, strength, and gradient. X-ray work showed mixed crystal phases, with both hexagonal and cubic forms present. Magnetic tests found partial alignment of the easy axis of one phase along the growth field. The study links field setup to crystal shape.

Catalog record

CREATORSteven Flynn, Caeli L. Benyacko, Matúš Mihalik, Jared Lee, Fuyan Ma, Michael E. Bates, Shubham Sinha, Khalil A. Abboud, Marian Mihalik, Mark W. Meisel, James J. Hamlin
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-00788

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Synthesis of Cobalt Grown from Co-S Eutectic in High Magnetic Fields Steven Flynn, Caeli L. Benyacko, Matúš Mihalik, Jared Lee, Fuyan Ma, Michael E. Bates, Shubham Sinha, Khalil A. Abboud, Marian Mihalik, Mark W. Meisel, James J. Hamlin Abstract Samples of Co were grown directly in the ferromagnetic state under equilibrium conditions using a cobalt sulfide flux. Magnetic fields up to 9 T were applied during growth, and isolated Co products exhibit progressively elongated morphologies, from cubes to rectangular rods to needle-like tendrils with poorly-defined facets. The degree of elongation of the major axis was found to correlate with magnetic field direction, strength, and gradient. Two-dimensional X-ray diffraction data indicate some level of polycrystalline-like samples, and quantitative analyses (Le Bail and Rietveld) of the one-dimensional data confirm the presence of hcp and fcc phases. The magnetic responses indicate a partial alignment of the magnetic easy-axis of the hcp phase along the magnetic field present during growth. I Introduction The application of high magnetic fields during materials synthesis and processing at high temperatures has been the subject of research for at least four decades [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 ] . An initial impression is the presence of the magnetic field is not expected to have a significant effect because the ratio of the magnetic to thermal energy is estimated to be small, e.g. , \mu_{\mathrm{eff}}B/k_{\mathrm{B}}T\lesssim 0.1 for \mu_{\mathrm{eff}}=5\,\mu_{\mathrm{B}} , B=$10\text{\,}\mathrm{T}$ , and T=$300\text{\,}\mathrm{K}$ , where k_{\mathrm{B}} is the Boltzmann constant and \mu_{\mathrm{B}} is the Bohr magneton. Contrarily, an increasing number of materials have been reported to possess altered properties when being synthesized or processed at extreme magnetothermal conditions [ 9 , 10 , 11 , 12 , 13 ] . The present work addresses the specific endeavor to grow and characterize single crystalline Co grown at temperatures below the Curie temperature of the solid by using a cobalt-sulfide flux, as suggested by Canfield and coworkers in 2012 [ 14 , 15 , 16 ] , Fig. 2 . Figure 1: The Co-S binary alloy phase diagram, adapted from [ 17 ] which is reproduced and given in [ 18 ] , presumably based on aspects of another compilation [ 19 ] , is shown in the region of interest for this work. 2 2 2 It is important to note this phase diagram was generated in the absence of an applied magnetic field. The liquidus boundary is shown in blue, and the Curie temperature for pure solid cobalt is shown in red. The expected path of our composition Co 61 S 39 is shown by the green arrow, whose base is located at the hold temperature of 1050\text{\,}\mathrm{\SIUnitSymbolCelsius} and body spans the slow-cooling path to nominally 950\text{\,}\mathrm{\SIUnitSymbolCelsius} , where crystallization occurs as the liquidus line is encountered. Possessing the highest known Curie temperature ( T_{\mathrm{C}}=$1121\text{\,}\mathrm{\SIUnitSymbolCelsius}$=$1394\text{\,}\mathrm{K}$ ) of any single element, cobalt is an ideal model whose structural and magnetic properties are well-studied [ 20 , 21 , 22 , 23 , 24 , 19 , 17 , 18 ] . In fact dating back to the early 2000s, Beaugnon and collaborators have generated Co products from Co-B [ 25 , 26 , 27 , 28 , 29 , 30 , 31 , 32 ] Co-Cu [ 33 , 34 , 35 , 36 ] , and Co-Sn [ 37 , 38 , 39 , 40 , 41 ] melts. More specifically, working with supercooled melts, solidification of the product directly in the ferromagnetic phase was achieved despite the melting point being higher than the T_{\mathrm{C}} . Although the transition from a mobile liquid metal phase solidifying into a ferromagnetic state enhances the development of magnetic field effects, the non-equilibrium precipitation from a supercooled melt effects the crystallization process, thereby perturbing the crystal structure, microstructure, morphology, and properties of the products. Herein, Co samples were directly crystallized in the ferromagnetic state under equilibrium conditions using a low melting Co-S eutectic. After describing the the methods and experimental arrangements, the macroscopic and microscopic structural analyses, along with magnetic and conductivity properties, are presented and discussed. Lastly, this work and its findings are summarized to indicate future extensions that are beyond the scope of this initial attempt. For example, the well-defined facets observed in our products have not been reported elsewhere and provide an example of potential properties that may be uniquely accessed by an equilibrium precipitation in high magnetic fields. II Experimental Details II.1 Furnace-Magnet A custom insert was designed and built so a 1200\text{\,}\mathrm{\SIUnitSymbolCelsius} resistive furnace could be operated in an 89-mm, room-temperature-bore of an Oxford Instruments 9.4 T NMR superconducting magnet, whose current was adjusted to provide a specific field value and then set in persistent mode for fixed field operation. The unit, whose details are described in the Appendix, consists of the integration of three main components, namely a water-cooled, heat-exchanging outer jacket, an interior resistive heater unit, and extra passive insulation and support. II.2 Synthesis and Isolation of Co products Cobalt samples were synthesized using a Co-S binary flux [ 14 , 15 , 16 ] . Stoichiometric amounts of Co (Cerac, 99.5%) and S (Alfa Aesar, 99.9995%) were precisely weighed to give a final composition of Co 61 S 39 . This ratio was selected to target the Co-rich side of the Co-S eutectic while fixing the liquidus temperature below 1050\text{\,}\mathrm{\SIUnitSymbolCelsius} as a practical consideration, Fig. 2 . Sample mixtures were placed in an alumina crucible with the low melting S on top, and the loaded reaction vessel was subsequently sealed in a quartz tube after 5 cycles of evacuation and flushing with Ar gas. The sealed tubes were subsequently loaded into a custom-designed furnace situated in the room-temperature bore of the superconducting magnet. Samples were heated at a rate of 5\text{\,}\mathrm{\SIUnitSymbolCelsius} /min to 1050\text{\,}\mathrm{\SIUnitSymbolCelsius} , held for 24 hours, cooled at a rate of 1\text{\,}\mathrm{\SIUnitSymbolCelsius} /hr to 900\text{\,}\mathrm{\SIUnitSymbolCelsius} , and then cooled to room temperature while remaining in the furnace. This process was performed while the field of the magnet was held constant at either B=0 , 3, or 9 T. It is important to note, the furnace-magnet system does not presently allow the sample to be rapidly removed for centrifuging to remove flux due to the large magnetic forces present in the field gradient region. In a fixed field, several synthesis runs were performed in the center of the homogeneous field region, where the field variation was less than 0.1% over the synthesis region, and Co pieces extracted from the Co-S boule were labeled by the synthesis field. In one instance, the synthesis occurred 6.35\,\pm\,0.51 cm below the center of the homogeneous field region, where the field and its gradient were approximately 8.8\,\pm\,0.1 T and 0.10\,\pm\,0.05 T/cm. The resultant Co products are described in Table 1 . As shown in in Fig. 2 ,reacted samples typically consisted of a boule of solidified flux surrounding the Co flux products. The latter were mechanically separated from the former through careful application of force to the relatively brittle flux matrix. Flux products were identified visually through their distinct, metallic appearance and clear facets in some cases. Pieces from the Co regions were extracted in sizes and orientations

Read the complete text