Dipolar-exchange spin waves in thin bilayers

Rob den Teuling 1, Ritesh Das 1, Artem V. Bondarenko 1,2, Elena V. Tartakovskaya 1,2,3, Gerrit E. W. Bauer 4,5, Yaroslav M. Blanter 1 · 2025

Read Dipolar-exchange spin waves in thin bilayers by Rob den Teuling 1, Ritesh Das 1, Artem V. Bondarenko 1,2, Elena V. Tartakovskaya 1,2,3, Gerrit E. W. Bauer 4,5, Yaroslav M. Blanter 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-00631.txt.

Introduction

Rob den Teuling and colleagues worked out in 2025 how spin waves travel through a pair of thin magnetic layers stacked together. Spin waves are ripples in magnetization that can carry signals without moving charge. In a bilayer, the waves feel exchange coupling between the layers and dipolar interactions within and between them. The layers' relative magnetization direction changes the resulting spectrum.

Working in the continuum approximation, the authors analyze how the magnetic stray fields emitted by the waves propagate nonreciprocally, favoring one direction over the other. They connect the theory to measurements on synthetic antiferromagnets and weakly coupled van der Waals antiferromagnetic bilayers, where an applied field flips the alignment. Such systems are candidates for low-power magnonic devices. Predicting their spectra tells experimentalists which signals to expect from magnetometry.

Catalog record

CREATORRob den Teuling 1, Ritesh Das 1, Artem V. Bondarenko 1,2, Elena V. Tartakovskaya 1,2,3, Gerrit E. W. Bauer 4,5, Yaroslav M. Blanter 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-00631

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Dipolar-exchange spin waves in thin bilayers Rob den Teuling 1, Ritesh Das 1, Artem V. Bondarenko 1,2, Elena V. Tartakovskaya 1,2,3, Gerrit E. W. Bauer 4,5, Yaroslav M. Blanter 1 Abstract We investigate the dipolar-exchange spin wave spectrum in thin ferromagnetic bilayers with in-plane magnetization, incorporating interlayer exchange coupling and intra- and interlayer dipolar interactions. In the continuum approximation we analyze the nonreciprocity of propagating magnetic stray fields emitted by spin waves as a function of the relative orientation of the layer magnetizations that are observable by magnetometry of synthetic antiferromagnets or weakly coupled type-A van der Waals antiferromagnetic bilayers as a function of an applied magnetic field. Preprint: APS/123-QED I Introduction Since the scientific legacy of Victor Bar’yakhtar is vast and multifaceted, a comprehensive overview falls outside the scope of this article. Here, we focus on a select subset of his contributions that strongly influences the scientific perspective of one of the authors (E.V.T.), who is directly associated with Bar’yakhtar’s research school. The methods developed by Bar’yakhtar and Maleev to describe neutron scattering by magnetic materials [ 1 , 2 ] enabled the understanding of a broad array of experiments, such as the spin wave spectra of multilayered rare-earth metal systems [ 3 , 4 ] , the ground-state magnetic configurations and phase transitions observed in neutron scattering experiments on segmented nanowire arrays [ 5 , 6 ] , and the behavior of thin layers with itinerant ferromagnetic phases [ 7 , 8 ] . The work of Bar’yakhtar and his collaborators on magnetic soliton dynamics [ 9 , 10 , 11 ] laid the foundation for burgeoning field that investigates three-dimensional magnetic textures [ 12 , 13 ] . Here we address the problem of exchange-dipole spin waves (SWs) in planar ferromagnetic (FM) bilayers with in-plane magnetization. We consider both the dipole and exchange interactions. For previous studies of this problem see [ 14 , 15 ] , and references therein. We approach it without a series expansion in ka , where k is the modulus of the wave vector and a is a thickness of the layer. We employ the continuum approximation, based on the seminal work by Akhiezer, Bar’yakhtar, and Peletminsky [ 16 ] (see also monographs and reviews [ 17 , 18 ] ) and discuss its applicability to atomically thin ferromagnetic layers. We start by calculating the dipolar fields and SW frequencies in a FM layer that is thinner than its exchange length such that the low-frequency excitations are constant normal to the layer. In permalloy, for example, the thickness should not exceed 30 nm [ 19 ] . The impact of various boundary conditions on the magnetization profile across the thickness and the corresponding frequencies was analyzed in [ 20 ] . II Theoretical framework Fig. 1 sketches a ferromagnetic layer of thickness a in the (y,z) -plane. The magnetization M_{0} and the external magnetic field \vec{H} both lie along the z -axis. For weak excitations \displaystyle\vec{M} \displaystyle=\vec{M}_{0}+\vec{m}(y,z)e^{i\Omega t} (1) \displaystyle=[m_{x}(y,z)e^{i\Omega t},m_{y}(y,z)e^{i\Omega t},M_{0}]^{T} Figure 1 : Ferromagnetic layer with external magnetic field along the in-plane magnetization. The linearized Landau-Lifshitz (LL) equation takes the form \displaystyle i\frac{\Omega}{\mu_{0}\gamma}m_{x} \displaystyle=(H_{0}-M_{0}D\Delta)m_{y}+M_{0}\frac{\partial\Phi}{\partial y}, (2) \displaystyle-i\frac{\Omega}{\mu_{0}\gamma}m_{y} \displaystyle=(H_{0}-M_{0}D\Delta)m_{x}+M_{0}\frac{\partial\Phi}{\partial x}. Here \gamma/2\pi=29.6 GHz/T is the gyromagnetic ratio, H_{0}=|\vec{H}| , M_{0}=|\vec{M_{0}}| , D=(2A)/(\mu_{0}M_{0}^{2}) is the squared exchange length [ 17 ] , A is the exchange stiffness, and the magnetic scalar potential \Phi satisfies the magnetostatic equation \displaystyle\nabla^{2}\Phi \displaystyle=\vec{\nabla}\cdot\vec{M},\hskip 14.22636pt-\frac{a}{2}\leq x\leq\frac{a}{2}, (3) \displaystyle\nabla^{2}\Phi \displaystyle=0,\hskip 14.22636ptx<-\frac{a}{2},\hskip 14.22636ptx>\frac{a}{2}. In addition, the boundary conditions for the magnetic potential must be satisfied, corresponding to continuity of the tangential component of the magnetic field vector and the normal component of the magnetic induction vector. Two methods can be used for the analytical evaluation of the dipole-exchange SW spectrum. One approach, proposed by De Wames and Wolfram [ 21 ] , involves solving Eqs. (2) and (3) simultaneously as a system of differential equations with corresponding boundary conditions using a trial set of eigenfunctions. However, as it turned out, this approach is not suitable for a broad range of sample geometries and magnetic moment directions. In fact, its effectiveness is limited to the cases where external field and the saturation magnetization are completely in-plane or perpendicular to the surface in infinite layers, as well as in infinite wires where magnetic moments align along the wire axis [ 22 , 23 ] . Generally speaking, this method gives valid results only if an exact solution exists, but for dipolar-exchange SW problems this is quite a rare occurrence since the exchange and dipolar operators usually have different eigenfunctions; see, however, Ref. [ 24 ] . For the general case an alternative approach was proposed [ 17 , 25 ] , where Eq. (3) is solved separately using \Phi(\vec{r})=\frac{1}{4\pi}\int d\vec{r}{\hskip 2.84526pt{}^{\prime}}\left(\vec{m}{{}^{\prime}}\cdot\vec{\nabla}{{}^{\prime}}\frac{1}{|\vec{r}-\vec{r}{\hskip 2.84526pt{}^{\prime}}|^{2}}\right) (4) where the integration over r{{}^{\prime}} is over the volume of the magnetic material, and m{{}^{\prime}}(r{{}^{\prime}}) should be computed self-consistently with Eq. (2) . In such a case the boundary conditions for the magnetic potential are satisfied automatically. Eq. (4) holds both inside and outside the magnetic material. If an exact solution does not exist, an approximate one can be obtained by perturbation theory. This method has resolved the majority of spin dynamics problems not only in layers, but also in confined magnetic elements under different magnetic field configurations, and will be used in the following sections. For an extended layer we chose the plane wave Ansatz \displaystyle m_{x}(y,z) \displaystyle=Ae^{ik_{y}y+ik_{z}z}=Ae^{i\vec{k}\cdot\vec{\rho}{\hskip 1.42262pt}}, (5) \displaystyle m_{y}(y,z) \displaystyle=Be^{ik_{y}y+ik_{z}z}=Be^{i\vec{k}\cdot\vec{\rho}{\hskip 1.42262pt}}, where \vec{k}=(0,k_{y},k_{z}) is the wave vector and \vec{\rho}=(0,\rho_{y},\rho_{z}) . Inserting Eq. (5) into Eq. (4) gives \displaystyle\Phi=\int dV^{{}^{\prime}} \displaystyle\Big(m_{x}(y{{}^{\prime}},z{{}^{\prime}})\frac{\partial}{\partial x{{}^{\prime}}}\frac{1}{|\vec{r}-\vec{r}{\hskip 2.84526pt{}^{\prime}}|} (6) \displaystyle+m_{y}(y{{}^{\prime}},z{{}^{\prime}})\frac{\partial}{\partial y{{}^{\prime}}}\frac{1}{|\vec{r}-\vec{r}{\hskip 2.84526pt{}^{\prime}}|}\Big) Next we show that the plane waves are functions of the dipolar operator as well. For this purpose we use the Fourier representation \frac{1}{|\vec{r}-\vec{r}{\hskip 2.84526pt{}^{\prime}}|}=\int\frac{d\vec{q}}{(2\pi)^{2}}\frac{2\pi}{q}e^{i\vec{q}\cdot(\vec{\rho}-\vec{\rho}{{}^{\prime}})}e^{-q|x-x{{}^{\prime}}|}, (7) where \vec{q}=(0,q_{y},q_{z}) and q=|\vec{q}| . The integrals run from -\infty to \infty . The Fourier components of the integrals in Eq. (6) are then separable and read inside the layer ( -a/2<x<a/2 ) \displaystyle\Phi_{in}=e^{i\vec{k}\cdot\vec{\rho}} \displaystyle\Big(A\frac{1}{2k}e^{-ak/2}(e^{kx}-e^{-kx}) (8) \displaystyle-Bi\frac{ik_{y}}{2k}\big(\frac{2}{k}-\frac{e^{-\frac{ak}{2}(e^{kx}-e^{-kx})}}{k}\big)\Big), where k=\sqrt{k_{x}^{2}+k_{y}^{2}} . Calculating the dipolar magnetic fields averaged over the thickness \vec{h}=-\int^{\frac{a}{2}}_{-\frac{a}{2}}dx\vec{\nabla}\Phi, (9) we obtain \displaystyle h_{x}(\vec{r}) \displaystyle=-Ae^{i\vec{k}\cdot\vec{\rho}}f(k), (10) \displaystyle h_{y}(\vec{r}) \displaystyle=-Be^{i\vec{k}\cdot\vec{\rho}}\frac{k_{y}^{2}}{k^{2}}(1-f(k)), where f(k)=\frac{1-e^{-ak}}{ak}. (11) Substituting Eqs. (5) and (10) into Eq. (2) leads to two linear homogeneous equations in A and B. These equations yield the following eigenfrequencies \Omega , \displaystyle\left(\frac{\Omega}{\mu_{0}\gamma}\right)^{2} \displaystyle=\big(M_{0}Dk^{2}+H_{0}+M_{0}f(k)\big) (12) \displaystyle\times\big(M_{0}Dk^{2}+H_{0}+M_{0}\frac{k_{y}^{2}}{k^{2}}(1-f(k))\big). Eq. (12) is widely used [ 26 , 27 , 28 ] to explain experimental data in thin layers, and is easily adapted to describe spin excitations in thin confined nanostructures (dots, stripes) in planar geometries. The magnetic potential outside the layer for x>a/2 reads \Phi^{+}_{out}=\sinh(\frac{ak}{2})\frac{e^{-kx}}{k}e^{i\vec{k}\cdot\vec{\rho}}(A-iB\frac{k_{y}}{k}). (13) and for x<-a/2 \Phi^{-}_{out}=-\sinh(\frac{ak}{2})\frac{e^{-kx}}{k}e^{i\vec{k}\cdot\vec{\rho}}(A+iB\frac{k_{y}}{k}). (14) We use Eqs. (13) and (14) to calculate the interlayer dipole interaction in a bilayer below. III Bilayers Here we turn to the dipole-exchange SWs in antiferromagneticaly coupled magnetic bilayers, as shown in Fig. 2 . Figure 2 : Bilayer with the in-plane magnetization and antiferromagnetic interlayer exchange coupling. Two FM layers with equal saturation magnetization M_{0} and exchange length D are coupled by an antiferromagnetic (AFM) exchange constant J>0 . Layer 1 is located at coordinates (L-a)/2<x<(L+a)/2 , and the layer 2 at -(L+a)/2<x<-(L-a)/2 . The external magnetic field is applied along the z axis. The

Read the complete text