Wavenumber affects the lift of ray-inspired fins near a substrate
Yuanhang Zhu 1,2,∗, Leo Liu 1, Tianjun Han 1,3, Qimin Feng 4, Keith Moored 3, Qiang Zhong 4, and Daniel Quinn 1,5,∗ · 2025
Read Wavenumber affects the lift of ray-inspired fins near a substrate by Yuanhang Zhu 1,2,∗, Leo Liu 1, Tianjun Han 1,3, Qimin Feng 4, Keith Moored 3, Qiang Zhong 4, and Daniel Quinn 1,5,∗ (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-00427.txt.
Introduction
Yuanhang Zhu and co-authors study how wavenumber affects lift on ray-inspired fins near the seafloor, in their 2025 arXiv paper. Rays swim more wave-like near the ground and more flap-like away from it, for reasons that were unknown. The team asked whether hydrodynamics alone could explain the switch.
Using a robotic fin that can both flap and undulate, plus flow simulations and 3D flow measurements, they found lift near the ground depends strongly on wavenumber. Lift was always negative: a suction toward the ground that hit flapping fins harder and disrupted their wakes more. The stronger suction offers a physical reason why rays undulate near the bottom, and a design hint for ray-inspired robots.
Catalog record
| CREATOR | Yuanhang Zhu 1,2,∗, Leo Liu 1, Tianjun Han 1,3, Qimin Feng 4, Keith Moored 3, Qiang Zhong 4, and Daniel Quinn 1,5,∗ |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 26 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2504-00427
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Wavenumber affects the lift of ray-inspired fins near a substrate Yuanhang Zhu 1,2,∗, Leo Liu 1, Tianjun Han 1,3, Qimin Feng 4, Keith Moored 3, Qiang Zhong 4, and Daniel Quinn 1,5,∗ Abstract Rays and skates tend to have different fin kinematics depending on their proximity to a ground plane such as the sea floor. Near the ground, rays tend to be more undulatory (high wavenumber), while far from the ground, rays tend to be more oscillatory (low wavenumber). It is unknown whether these differences are driven by hydrodynamics or other biological pressures. Here we show that near the ground, the time-averaged lift on a ray-like fin is highly dependent on wavenumber. We support our claims using a ray-inspired robotic rig that can produce oscillatory and undulatory motions on the same fin. Potential flow simulations reveal that lift is always negative because quasisteady forces overcome wake-induced forces. Three-dimensional flow measurements demonstrate that oscillatory wakes are more disrupted by the ground than undulatory wakes. All these effects lead to a suction force toward the ground that is stronger and more destabilizing for oscillatory fins than undulatory fins. Our results suggest that wavenumber plays a role in the near-ground dynamics of ray-like fins, particularly in terms of dorsoventral accelerations. The fact that lower wavenumber is linked with stronger suction forces offers a new way to interpret the depth-dependent kinematics of rays and ray-inspired robots. \titlehead Research 1 Introduction Rays and skates swim differently depending on whether they are bottom-dwelling (benthic) or open-water-dwelling (pelagic). While bottom-dwelling rays tend to be more “undulatory” (high wavenumber), open-water-dwelling rays tend to be more “oscillatory” (low wavenumber) [ 1 , 2 ] . Motions in between have been called “semi-oscillatory” [ 3 ] (Fig. 1 ). Some rays use a mix of motions: smooth butterfly rays ( Gymnura micrura ) tend to undulate near the seafloor but oscillate in open water [ 1 ] . Existing explanations of this depth-dependent wavenumber focus on migration efficiency [ 2 , 4 ] or sediment disturbance [ 1 ] . We wondered if hydrodynamic interactions between fins and the seafloor could also play a role. Figure 1: Oscillatory, Semi-Oscillatory, and Undulatory motion. Left: Cownose Ray ( Rhinoptera Bonasus , k=0.4 ). Middle: Clearnose Skate ( Rostroraja Eglanteria , k=0.9 ). Right: Bluespotted Ribbontail Ray ( Taeniura Lymma , k=1.4 ). Wavenumbers extracted from [ 1 ] . A “ground”, such as the seafloor, induces a range of hydrodynamic effects on oscillating/undulating fins. Rigid pitching hydrofoils produce more thrust near the ground [ 5 , 6 ] , and they can feel positive or negative lift (i.e. pushing away or pulling toward the ground), depending on their distance from the ground [ 7 ] . Oscillating/undulating flexible fins are more complicated. Like rigid fins, flexible fins can experience more thrust [ 8 , 9 , 10 , 11 , 12 , 13 , 14 ] and both positive and negative lift [ 8 , 13 , 12 ] near the substrate. However, a flexible fin’s motion and its interaction with the substrate are highly coupled [ 9 , 10 ] , causing secondary effects. For a flexible fin, thrust may actually decrease near the substrate [ 15 ] , or it may only increase at high frequencies or resonance [ 16 ] . Regarding lift, some studies of near-ground flexible fins reported only negative lift and no equilibria [ 17 , 6 , 8 ] . One study reported no significant near-ground changes at all [ 18 ] . With wavenumber as a passive output, it has remained difficult to isolate the apparently complex role of the oscillation-undulation spectrum for near-ground flexible swimmers. We present here results from a robotic fin that can actively prescribe wavenumber, thereby isolating the effects of oscillation and undulation. We discovered that for near-ground fins, the primary effect of wavenumber is on the net suction toward the ground (negative net lift). Far from the ground, both undulation and oscillation produce negligible net lift, because they are symmetric motions. Near the ground, oscillatory motions produce a suction force that is much larger than the force produced by undulatory motions, e.g. 6 times larger at f=3 Hz (Fig. 3 ( f )). We used a vortex model to uncover the source of this suction force, which is an imbalance between wake-induced and quasisteady forces. Our results suggest that fin-ground interactions may have a role to play in the mystery of depth-dependent wavenumber. 2 Methods Figure 2: ( a ) Side view and back view of the ray-inspired robotic platform. ( b ) Sketches of the wave shape at the fin tip. ( c ) A perspective view of the experimental setup. Test section: 0.38 \times 0.45 \times 1.52 m). To test the performance of our robotic fin, we measured the forces that it produced in a recirculating water channel. To better understand the origin of these forces, we used particle image velocimetry (experimental) and potential flow simulations (numerical). 2.1 Ray-inspired robotic fin The robotic fin was molded using silicone rubber (50% Ecoflex 0010 and 50% Ecoflex 0030). It had a rectangular projected shape with a chord c=270\; mm, span s=190\; mm, and thickness h=9.5\; mm. Undulatory and oscillatory motions were imposed by 13 garolite spines embedded in the fin (Fig. 2 ( a )). The pivot point of the spines set the fin’s peak-to-peak tip amplitude, a , to be 56 mm. Each spine was connected to a rotating cam, and the offset between the cams dictated the fin’s wavenumber, k , defined as the ratio between the fin’s chord and wavelength. The modular cam train was driven by a geared motor (DJI M3508), which set the fin’s frequency, f . We tested kinematics that roughly align with real rays and skates. We tested three wavenumbers: k=2/3 (oscillation), k=3/3 (semi-oscillation), and k=4/3 (undulation) (Fig. 2 ( b )). For comparison, rays in nature exhibit wavenumbers ranging from \sim 0.4 to 1.4 [ 1 ] . We chose frequencies corresponding to biologically-relevant Strouhal numbers, St . Like others before us [ 19 , 20 ] , we defined St using the span-averaged amplitude: St=fa/2u_{\infty} , where u_{\infty} is the incoming flow speed. Experimentally attainable frequencies varied by wavenumber, leading to St ranges of 0.04-0.67 , 0.04-0.76 , and 0.04-0.86 for the k=2/3 , 3/3 , and 4/3 fins, respectively. Further details of the fin assembly’s design and construction can be found in [ 21 ] . The robotic fin was suspended from a motorized 3-axis traverse into a recirculating water channel (Fig. 2 c ). We defined the fin’s ground proximity, d , as the distance between the fin’s mean position and the water channel’s side wall (Fig. 2 a ). This proximity ranged from d/c=0.27 (closest approach before contact) to 0.71 (mid-channel position). Moving the two y -traverses together changes ground proximity d , while moving them differentially sets the fin’s angle of attack with respect to the sidewall, \alpha . The channel’s water level was held above the fin, and a horizontal baffle plate (not shown) was used to reduce surface waves. The free-stream speed of the channel was kept at u_{\infty}=150\;\mathrm{m~s^{-1}} , monitored using an ultrasonic