Quantum Computation of a Quasiparticle Band Structure with the Quantum-Selected Configuration Interaction

Takahiro Ohgoe, Hokuto Iwakiri, Kazuhide Ichikawa, Sho Koh, Masaya Kohda · 2025

Read Quantum Computation of a Quasiparticle Band Structure with the Quantum-Selected Configuration Interaction by Takahiro Ohgoe, Hokuto Iwakiri, Kazuhide Ichikawa, Sho Koh, Masaya Kohda (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2504-00309.txt.

Introduction

Takahiro Ohgoe and co-authors compute the quasiparticle band structure of silicon on a real quantum processor, dodging a scaling trap in standard methods. Their 2025 paper targets strongly linked electron systems, where exact band maps strain classical machines. A popular quantum recipe needs deep tuning that noise and flat landscapes wreck at scale.

The hybrid route swaps full tuning for a selection trick: a quantum-chosen set of configurations carries the math. An expansion method then builds the band picture from that subspace. Sixteen qubits on an IBM machine ran the silicon case. The authors say skipping heavy optimization makes the recipe friendlier to bigger systems on today's noisy hardware.

Catalog record

CREATORTakahiro Ohgoe, Hokuto Iwakiri, Kazuhide Ichikawa, Sho Koh, Masaya Kohda
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2504-00309

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Quantum Computation of a Quasiparticle Band Structure with the Quantum-Selected Configuration Interaction Takahiro Ohgoe, Hokuto Iwakiri, Kazuhide Ichikawa, Sho Koh, Masaya Kohda Abstract Quasiparticle band structures are fundamental for understanding strongly correlated electron systems. While solving these structures accurately on classical computers is challenging, quantum computing offers a promising alternative. Specifically, the quantum subspace expansion (QSE) method, combined with the variational quantum eigensolver (VQE), provides a quantum algorithm for calculating quasiparticle band structures. However, optimizing the variational parameters in VQE becomes increasingly difficult as the system size grows, due to device noise, statistical noise, and the barren plateau problem. To address these challenges, we propose a hybrid approach that combines QSE with the quantum-selected configuration interaction (QSCI) method for calculating quasiparticle band structures. QSCI may leverage the VQE ansatz as an input state but, unlike the standard VQE, it does not require full optimization of the variational parameters, making it more scalable for larger quantum systems. Based on this approach, we demonstrate the quantum computation of the quasiparticle band structure of a silicon using 16 qubits on an IBM quantum processor. I Introduction Accurately describing quasiparticle band structures is crucial for understanding strongly correlated electron systems, as these structures provide key insights into the fundamental properties of materials. Despite the advancements in computational techniques, solving these structures precisely remains a significant challenge for classical computers. Traditional methods such as density functional theory (DFT) have achieved substantial success in simulating materials [ 1 , 2 ] , but they fall short in capturing strong electron correlations and systematically underestimate the band gaps in semiconductors and insulators. More sophisticated approaches, including many-body perturbation theories like the GW approximation [ 3 ] , partially address these limitations but still struggle with strongly correlated systems. Wave-function-based methods, originally developed in quantum chemistry, have shown promise for tackling these issues [ 4 , 5 , 6 , 7 ] , yet their computational costs render them impractical for large-scale solid-state systems. Quantum computing has emerged as a powerful alternative, offering the potential to efficiently and accurately simulate quantum systems. Two prominent quantum algorithms for electronic structure calculations are the quantum phase estimation (QPE) [ 8 , 9 , 10 ] and the variational quantum eigensolver (VQE) [ 11 ] . QPE can theoretically provide exponential speedup in exact full configuration interaction (FCI) calculations. However, its reliance on deep quantum circuits makes it highly susceptible to noise, limiting its applicability on current noisy intermediate-scale quantum (NISQ) devices [ 12 ] . On the other hand, VQE uses shallow quantum circuits, making it more suitable for near-term applications and enabling successful demonstrations in small-molecule simulations [ 11 , 13 , 14 ] . This adaptability has spurred significant interest in extending VQE to more complex systems, including periodic materials. Quasiparticle band structures have recently been studied using VQE combined with quantum subspace expansion (QSE) methods [ 15 , 16 , 17 ] 1 1 1 From a different perspective, there is a proposal [ 59 ] to employ quantum machine learning for band-structure calculations, with a demonstration [ 60 ] on a quantum device. . These methods, which are inspired by the equation-of-motion approach, enable the computation of excited states and quasiparticle band structures. So far, most of experimental demonstrations of band structures on real quantum devices have been limited to tight-binding Hamiltonians [ 19 , 20 , 21 ] , which neglect two-body interactions critical for describing electron correlations. However, incorporating two-body terms is essential for practical first-principles calculations especially for strongly correlated systems. In our previous study [ 22 ] , we have experimentally demonstrated the calculation of quasiparticle band structure of a silicon based on the Hamiltonian including the two-body terms. However, the number of qubits utilized on a real quantum device was limited to 2, which results in the calculation of only two bands. Increasing the number of qubits becomes difficult, because optimizing the variational parameters in VQE becomes severer as the system size grows, due to device noise, statistical noise [ 23 ] , and the barren plateau problem [ 24 ] . Figure 1: (Color online) Schematic description of our approach to calculate the quasiparticle band structure in this paper. It is based on QSCI for the ground-state calculation, combined with QSE to find quasiparticle bands. In this paper, we propose a hybrid approach that combines QSE with the quantum-selected configuration interaction (QSCI) method [ 25 ] . Here, QSCI is introduced as an alternative to VQE for ground-state calculations. It utilizes quantum computers to sample relevant electron configurations and classical computers for subspace Hamiltonian construction and diagonalization. Since the proposal in Ref. [ 25 ] , QSCI has been actively studied [ 26 , 27 , 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 ] , including a large-scale experimental demonstration [ 40 ] . QSCI may leverage the VQE ansatz as an input state but, unlike the standard VQE, it does not require full optimization of the variational parameters, improving scalability for larger quantum systems. To demonstrate the feasibility of this approach, we calculate the quasiparticle band structure of a silicon crystal using an IBM quantum processor. Our results highlight the potential of hybrid quantum-classical algorithms for advancing the study of strongly correlated electron systems. II Hamiltonian representation We consider the second-quantized representation of ab initio Hamiltonians of periodic systems, which is expressed as follows: \displaystyle{\hat{H}} \displaystyle= \displaystyle\sum_{pq}\sum_{\mathbf{k}}t_{pq}^{\mathbf{k}}{\hat{c}}_{p{\mathbf{k}}}^{\dagger}{\hat{c}}_{q{\mathbf{k}}}^{\vphantom{\dagger}} (1) \displaystyle+\sum_{pqrs}\sum_{{\mathbf{k}}_{p}{\mathbf{k}}_{q}{\mathbf{k}}_{r}{\mathbf{k}}_{s}}^{\prime}v_{pqrs}^{{\mathbf{k}}_{p}{\mathbf{k}}_{q}{\mathbf{k}}_{r}{\mathbf{k}}_{s}}{\hat{c}}_{p{\mathbf{k}}_{p}}^{\dagger}{\hat{c}}_{q{\mathbf{k}}_{q}}^{\dagger}{\hat{c}}_{r{\mathbf{k}}_{r}}^{\vphantom{\dagger}}{\hat{c}}_{s{\mathbf{k}}_{s}}^{\vphantom{\dagger}}. Here, {\hat{c}}_{p{\mathbf{k}}}^{\dagger} ( {\hat{c}}_{p{\mathbf{k}}}^{\vphantom{\dagger}} ) is the fermionic creation (annihilation) operator on the p th crystalline orbital (CO) with the crystal momentum {\mathbf{k}} , which is obtained from Hartree-Fock (HF) calculations. The complex coefficients t_{pq}^{\mathbf{k}} and v_{pqrs}^{{\mathbf{k}}_{p}{\mathbf{k}}_{q}{\mathbf{k}}_{r}{\mathbf{k}}_{s}} represent one-body and two-body integrals between COs, respectively. The prime notation on the summation symbol indicates that the momentum conservation law, {\mathbf{k}}_{p}+{\mathbf{k}}_{q}-{\mathbf{k}}_{r}-{\mathbf{k}}_{s}={\mathbf{G}} must be satisfied, where {\mathbf{G}} is a reciprocal lattice vector of the unit cell. For quantum computations, the fermionic Hamiltonians Eq. ( 1 ) are mapped into the qubit Hamiltonians. In the present work, we employ the Jordan-Wigner transformation [ 41 ] as the mapping technique. III Quantum algorithms To calculate quasiparticle band structures, we take a hybrid quantum-classical approach. In our previous study [ 22 ] , we employed VQE combined with QSE. It is based on the formulation of Ref. [ 17 ] , where VQE is used to calculate the ground-state wave function and its energy while QSE to find quasiparticle excitations on the VQE state, which we identify as the quasiparticle bands. In this study, we adopt QSCI for the ground-state calculation, combined with QSE to find the quasiparticle band structure. Figure 1 illustrates an overview of our approach. In this setup, the QSE part is performed by classical computation with a compact representation of the ground-state wave function output by QSCI, while QSCI utilizes quantum computers. We expect this QSE-QSCI approach is applicable to larger system sizes than the original QSE-VQE setup. The following subsections provide a detailed explanation of our approach that integrates QSCI and QSE, describing each method in turn. III.1 QSCI for Ground States QSCI [ 25 ] is a class of hybrid quantum-classical algorithms to find

Read the complete text