Implementation and readout of maximally entangled two-qubit gates quantum circuits in a superconducting quantum processor
V. Stasino, P. Mastrovito, C. Cosenza, A. Levochkina, M. Esposito, D. Montemurro, G.P. Pepe, A. Bruno, F. Tafuri, D. Massarotti, H.G. Ahmad · 2025
Read Implementation and readout of maximally entangled two-qubit gates quantum circuits in a superconducting quantum processor by V. Stasino, P. Mastrovito, C. Cosenza, A. Levochkina, M. Esposito, D. Montemurro, G.P. Pepe, A. Bruno, F. Tafuri, D. Massarotti, H.G. Ahmad (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-24274.txt.
Introduction
Viviana Stasino and co-authors present a 2025 arXiv paper on running and reading entangled circuits on a five-qubit superconducting processor. Building gates is only half the battle; how the output is read decides what the machine seems to achieve. The team ran circuits of rising complexity, from single-qubit jobs to fully entangled Bell circuits, and compared two readout analyses.
One method multiplies readout probabilities; the other conditions them. The simple method sufficed for single-qubit circuits. For two-qubit entangled work, the conditional method proved essential to read results correctly. The authors used the comparison to tune their protocol for harder algorithms ahead.
Catalog record
| CREATOR | V. Stasino, P. Mastrovito, C. Cosenza, A. Levochkina, M. Esposito, D. Montemurro, G.P. Pepe, A. Bruno, F. Tafuri, D. Massarotti, H.G. Ahmad |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 51 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-24274
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Implementation and readout of maximally entangled two-qubit gates quantum circuits in a superconducting quantum processor V. Stasino, P. Mastrovito, C. Cosenza, A. Levochkina, M. Esposito, D. Montemurro, G.P. Pepe, A. Bruno, F. Tafuri, D. Massarotti, H.G. Ahmad Abstract Besides noticeable challenges in implementing low-error single- and two-qubit quantum gates in superconducting quantum processors, the readout technique and analysis are a key factor in determining the efficiency and performance of quantum processors. Being able to efficiently implement quantum algorithms involving entangling gates and asses their output is mandatory for quantum utility. In a transmon-based 5 5 -qubit superconducting quantum processor, we compared the performance of quantum circuits involving an increasing level of complexity, from single-qubit circuits to maximally entangled Bell circuits. This comparison highlighted the importance of the readout analysis and helped us optimize the protocol for more advanced quantum algorithms. Here we report the results obtained from the analysis of the outputs of quantum circuits using two readout paradigms , referred to as ”multiplied readout probabilities” and ”conditional readout probabilities” . The first method is suitable for single-qubit circuits, while the second is essential for accurately interpreting the outputs of circuits involving two-qubit gates. 1 Introduction The macroscopic quantum nature of Josephson junctions (JJs) is the key for the development of sophisticated quantum and classical cryogenic circuits, able to perform several types of operations: parametric amplification [ 1 , 2 , 3 , 4 , 5 , 6 ] , single-photon generation and detection [ 7 , 8 ] , novel microwave readout and control with cryogenic electronics [ 9 , 10 , 11 , 12 , 13 , 14 , 15 ] , protocols including cryogenic memories [ 16 , 17 ] and quantum computation [ 18 , 19 , 20 , 21 ] . Superconducting Quantum Processing Units (sQPU) provide encoding and manipulation of quantum information in single superconducting quantum bits and allow to implement up to thousands consecutive quantum logic operations (quantum gates) [ 22 ] , whose maximum number gets higher the longer are the coherence times of the system [ 23 , 24 , 25 ] . Most importantly, in sQPU, it is possible to experimentally implement the most straightforward evidences of quantum mechanics on a macroscopic scale: quantum superposition and entanglement generation [ 26 , 27 ] . Despite significant recent progress with Noisy Intermediate Scale Quantum (NISQ) computers [ 28 ] , running efficient quantum algorithms on sQPUs for practical goals is still limited by the current hardware capabilities. Excluding leading commercial players like Google or IBM [ 29 ] , most of the sQPUs available and reported in literature are composed of around ten qubits [ 30 , 31 , 32 ] , and the coupling with the external environment plays a fundamental role in quantum computing efficiency. Moreover, scaling the number of qubits in the same platform has been demonstrated to introduce loss of quantum information (state-leakage) and qubit-qubit spurious crosstalk, which is the main cause of errors, thus severely limiting the race toward quantum utility [ 33 ] . Therefore, a strong effort from the user is required to correct and mitigate errors that may occur in the sQPU to run efficient quantum algorithms. Most importantly, there is still a strong dependence between hardware and software: hardware capabilities must improve to meet the request for the implementation of application-specific quantum algorithms, and software must be coded and tested in such a way that knowledge of the hardware is taken into consideration. In this work, we aim at providing insightful details on the experimental techniques used to implement and readout single- and two-qubit gates algorithms on a five-qubit sQPU based on superconducting transmon qubits. Most importantly, it is crucial to establish an experimental protocol to efficiently interpret the output of a quantum algorithm. We discuss the difficulties arising when passing from single-qubit gate algorithms to highly-entangled quantum states generation. We demonstrate that a crucial role is played by the method used to interpret the output of a quantum circuit, specifically when dealing with the most entangled quantum states, the Bell states [ 34 , 35 , 36 ] , marking a key benchmark for the implementation of more sophisticated quantum algorithms. Figure 1: In a) equivalent decomposition of a Hadamard gate. A {\color[rgb]{0,0,0}R_{y}(\pi/2)} pulse is applied, followed by a {\color[rgb]{0,0,0}R_{x}(\pi)} -pulse [ 37 ] . In b), the pulse scheme of the Bell states circuit. A Hadamard gate is applied on the control qubit, followed by a CNOT gate (green). The CNOT gate can be decomposed in terms of Hadamard and CZ gates. The pulse sequence is composed of a Hadamard applied on target, a CZ (red), which is symmetric, and finally another Hadarmad on target. In c) pulse sequence of CZ experiment. An R_{x}(\pi) -pulse is applied both on the control and target qubits so that the state of the system is \ket{11} . Then, the control qubit is tuned with a flux pulse with variable amplitude and duration. Finally, a simultaneous measurement of the qubits is performed. 2 Implementing single- and two-qubit gates: towards Bell state generation in NISQ superconducting devices A Bell pair is a maximally entangled 2-qubit quantum state [ 38 ] , specially useful for applications like: quantum computing and communication [ 34 , 35 , 39 , 40 , 41 ] , quantum teleportation [ 42 , 43 ] , generation of multipartite entangled states that allow to work with more than two qubits at a time for scalable quantum algorithms [ 44 , 36 , 27 , 45 , 46 , 47 ] , superdense coding [ 48 , 49 ] and quantum criptography [ 50 , 44 ] . There are four types of Bell states, which are the maximally entangled quantum states that can be implemented with two qubits. They represent the simplest example of entanglement. More specifically, the Bell states are: \hskip 42.67912pt\ket{\Phi^+}=\frac{1}{\sqrt{2}}(\ket{0}\otimes\ket{0}+\ket{1}\otimes\ket{1}), (1) \hskip 42.67912pt\ket{\Phi^-}=\frac{1}{\sqrt{2}}(\ket{0}\otimes\ket{0}-\ket{1}\otimes\ket{1}), (2) \hskip 42.67912pt\ket{\Psi^+}=\frac{1}{\sqrt{2}}(\ket{0}\otimes\ket{1}+\ket{1}\otimes\ket{0}), (3) \hskip 42.67912pt\ket{\Psi^-}=\frac{1}{\sqrt{2}}(\ket{0}\otimes\ket{1}-\ket{1}\otimes\ket{0}). (4) Creating a Bell state typically involves single- and two-qubit quantum gates, like the Hadamard ( H ) gate and the Controlled-NOT ( CNOT ) gate (Fig. 1 ). Single-qubit gates can be expressed as rotation operators: \hskip 76.82234ptR_{\alpha}(\theta)=e^{-i\frac{\theta}{2}\sigma_{\alpha}}, (5) where \sigma_{\alpha} , with \alpha=\{x,y,z\} , represents a Pauli matrix and \theta is the rotation angle. Specifically, a Hadamard gate is a single-qubit gate, which allows the generation of the superposition of the two basis states \ket{0} and \ket{1} . It can be decomposed into native gates as [ 51 ] : \begin{split}H=Ph_{\frac{\pi}{2}}R_{y}(\pi/2)R_{z}(\pi)=\hskip 22.76228pt\\ \hskip 34.14322pt=i\frac{1}{\sqrt{2}}\begin{bmatrix}1&-1\\ 1&1\end{bmatrix}\begin{bmatrix}-i&0\\ 0&i\end{bmatrix}=\frac{1}{\sqrt{2}}\begin{bmatrix}1&1\\ 1&-1\end{bmatrix},\end{split} (6) where Ph_{\pi/2}=e^{i\frac{\pi}{2}}{\color[rgb]{0,0,0}\mathbb{1}} applies an overall phase \pi/2 to the qubit [ 51 ] . In this work, we used an equivalent decomposition for the Hadamard gate more suitable for our instrumentation, detailed in App. A . This circuit for the Hadamard gate involves a R_{y}(\pi/2) , followed by an R_{x}(\pi) [ 37 ] , as shown in Fig. 1 (a). The CNOT gate is a two-qubit gate (Fig. 1 (b)) , referred to as conditional gate [ 51 ] . Conditional gates take two qubits as inputs: the first is called ”control” and the second is called ”target”. The action of the target qubit strongly depends on the state