Mitigation of exchange crosstalk in dense quantum dot arrays
Daniel Jirovec 1, Pablo Cova Fariña 1∗, Stefano Reale 1, Stefan D. Oosterhout 1,2, Xin Zhang 1, Sander de Snoo 1, Amir Sammak 2, Giordano Scappucci 1, Menno Veldhorst 1, Lieven M. K. Vandersypen 1 · 2025
Read Mitigation of exchange crosstalk in dense quantum dot arrays by Daniel Jirovec 1, Pablo Cova Fariña 1∗, Stefano Reale 1, Stefan D. Oosterhout 1,2, Xin Zhang 1, Sander de Snoo 1, Amir Sammak 2, Giordano Scappucci 1, Menno Veldhorst 1, Lieven M. K. Vandersypen 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-23846.txt.
Introduction
A team of authors tackles cross-talk in dense quantum dot arrays in this 2025 paper. Quantum dots hold single spins for quantum computing, but as electrodes pack closer, adjusting one gate can disturb the exchange coupling between nearby spins.
The team shows how to find and cancel that cross-talk by tracking a known level crossing in germanium dots. Their method picks out the barrier to barrier cross-talk term without knowing the exchange value itself, in an array of two by four dots. Cross-talk terms varied a lot, in ways tied to device shape and gate layout. The team proved the fix by tuning four spin chains, and the method should extend to longer chains.
Catalog record
| CREATOR | Daniel Jirovec 1, Pablo Cova Fariña 1∗, Stefano Reale 1, Stefan D. Oosterhout 1,2, Xin Zhang 1, Sander de Snoo 1, Amir Sammak 2, Giordano Scappucci 1, Menno Veldhorst 1, Lieven M. K. Vandersypen 1 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 74 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-23846
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mitigation of exchange crosstalk in dense quantum dot arrays Daniel Jirovec 1, Pablo Cova Fariña 1∗, Stefano Reale 1, Stefan D. Oosterhout 1,2, Xin Zhang 1, Sander de Snoo 1, Amir Sammak 2, Giordano Scappucci 1, Menno Veldhorst 1, Lieven M. K. Vandersypen 1 Abstract Coupled spins in semiconductor quantum dots are a versatile platform for quantum computing and simulations of complex many-body phenomena. However, on the path of scale-up, cross-talk from densely packed electrodes poses a severe challenge. While cross-talk onto the dot potentials is nowadays routinely compensated for, cross-talk on the exchange interaction is much more difficult to tackle because it is not always directly measurable. Here we propose and implement a way of characterizing and compensating cross-talk on adjacent exchange interactions by following the singlet-triplet avoided crossing in Ge. We show that we can easily identify the barrier-to-barrier cross-talk element without knowledge of the particular exchange value in a 2 × \times 4 quantum dot array. We uncover striking differences among these cross-talk elements which can be linked to the geometry of the device and the barrier gate fan-out. We validate the methodology by tuning up four-spin Heisenberg chains. The same methodology should be applicable to longer chains of spins and to other semiconductor platforms in which mixing of the singlet and the lowest-energy triplet is present or can be engineered. Additionally, this procedure is well suited for automated tuning routines as we obtain a stand-out feature that can be easily tracked and directly returns the magnitude of the cross-talk. Preprint: APS/123-QED I Introduction Spin qubits in gate defined semiconductor quantum dots constitute a versatile platform for quantum computation owing to their long coherence times, demonstrated high fidelity single- and two-qubit gates as well as their small footprint [ 1 , 2 ] . Also, they find applications in quantum simulations due to the inherent tunability of most Hamiltonian parameters which allows to explore different limits of the Fermi-Hubbard and the Heisenberg model [ 3 ] . A challenge in scaling up, however, is cross-talk from the gates defining the potential landscape as sketched in Fig. 1 a. Several approaches for cross-talk management exist and rely on defining a set of virtual gates designed to control the energy scale of choice, be it the on-site potential, tunnel coupling, or the exchange interaction [ 4 , 5 , 6 , 7 , 8 ] . Virtual plunger gates controlling the on-site potential are nowadays routinely used in experiments (Fig. 1 b), but methods for barrier-to-barrier cross-talk compensation are typically overlooked (Fig. 1 c) and only rarely implemented [ 9 , 10 ] . Digital spin qubit experiments so far circumvent the problem by avoiding the simultaneous activation of adjacent exchange couplings [ 11 , 12 ] or by populating quantum dot arrays only sparsely [ 13 , 14 , 15 ] . When only one exchange interaction is activated at a time, any cross-talk to other exchanges will not induce a detrimental effect, because the exponential dependence of exchange strength on barrier voltage leads to a wide voltage range over which the other interactions are effectively switched ’off’. However, implementations of three-qubit gates have been shown and do require require simultaneously activated adjacent exchange couplings [ 16 , 17 ] . Moreover, quantum simulation of the rich variety of physical phenomena described by the Fermi-Hubbard model [ 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 ] does require dense arrays of quantum dots with precise, and ideally orthogonal control not only of the on-site potentials but also of the nearest-neighbor exchange interactions or tunnel couplings. To appreciate why this is not straightforward, we note that once three or more spins are coupled together, the resulting energy spectrum and, hence, the oscillation frequencies are typically a combination of all the exchanges involved, hindering independent calibration of the exchange couplings. Furthermore, whereas the local electrochemical potentials vary linearly in the gate voltages, the tunnel coupling and exchange interaction depend exponentially on gate voltage. To realize cross-talk compensation in the face of this exponential dependence, references [ 28 , 6 ] assumed that barrier-to-barrier cross-talk can be compensated by a linear combination of voltages in the \emph{argument} of the exponential function, reducing cross-talk compensation between barriers to a linear problem nonetheless. In both cases, the virtualization methods required repeated measurements of either the tunnel coupling or exchange oscillations. Cross-talk was then extracted from exponential fits resulting in an indirect, laborious, and potentially error-prone measure. It is therefore desirable to obtain a measure of the cross-talk in a direct way similar to reservoir addition lines used to virtualize plunger gates. Here we demonstrate a way of characterizing barrier-to-barrier cross-talk to allow individual control of exchange interactions in a dense array of quantum dots. The method consists of tracking the position of the singlet-triplet anti-crossing in the multi-dimensional voltage space spanned by the confining barrier gates. Such a feature can be induced by a suitable intrinsic spin-orbit interaction, local magnetic field gradients or differences in the g-tensors, and determines a point of constant exchange that is fast to measure and easy to identify. This is especially useful because it isolates the effect of the exchange interaction of interest and could also be adapted for automated optimizations [ 7 ] . We empirically find how the gate architecture affects the cross-talk in the device. Finally, we apply this method to the tuning of four-spin Heisenberg chains in different configurations to test its validity and limitations. II Device and energy diagram Figure 1: (a) Schematics of the confinement potential for a chain of charges defined by the top gates in real voltage space (black solid line). A negative voltage pulse on the central barrier gate causes not only the middle tunnel barrier to be lowered but also shifts the electrochemical potentials of the nearby dots and the height of adjacent tunnel barriers (blue dashed line). (b) Commonly used virtual plunger gates work by applying a linear combination of gate voltages that keeps the electrochemical potentials of all other dots fixed. However, adjacent tunnel barrier heights are still affected and lateral shifts of charges are still present, although they might be slightly reduced. (c) If also the barriers are virtualized, a pulse on the middle barrier gate is compensated by suitable pulses on other barrier gates to keep the other tunnel barriers fixed and, ideally, counteract the lateral shifts of charges. In practice, however, only the combined effect of lateral shifts and tunnel barrier alterations can be compensated. A correct virtualization should allow orthogonal control of exchange interactions and enable a straightforward tuning of multi-spin chains. (d) Schematic of the 2 \times 4 dot array we use in this experiment. The dot plungers are labeled as p_{i} . Barriers b_{ij} separate dots i and j . The external magnetic field B is applied in an in-plane direction marked by the arrow. (e) Energy level diagram of a two-spin system in a double quantum dot as a function of detuning \epsilon (left) and tunnel coupling t_{c} (right). The dashed circles mark the spin-orbit induced avoided crossings. At |\epsilon|>U the two charges occupy the same dot ((2,0)