Test and Calibration of the Solar Ultraviolet Imaging Telescope (SUIT) on board Aditya-L1
J.Janmejoy Sarkar, V.N.VN Nived, S.Soumya Roy, R.D.Rushikesh Deogaonkar, S.Sreejith Padinhatteeri, R.B.Raja Bayanna, R.K.Ravi Kesharwani, A.R.A.N. Ramaprakash, DurgeshDurgesh Tripathi, R.G.Rahul Gopalakrishnan, B.J.Bhushan Joshi, S.S.Sakya Sinha, M.B.Mahesh Burse, M.V.Manoj Varma, A.T.Anurag Tyagi, · 2025
Read Test and Calibration of the Solar Ultraviolet Imaging Telescope (SUIT) on board Aditya-L1 by J.Janmejoy Sarkar, V.N.VN Nived, S.Soumya Roy, R.D.Rushikesh Deogaonkar, S.Sreejith Padinhatteeri, R.B.Raja Bayanna, R.K.Ravi Kesharwani, A.R.A.N. Ramaprakash, DurgeshDurgesh Tripathi, R.G.Rahul Gopalakrishnan, B.J.Bhushan Joshi, S.S.Sakya Sinha, M.B.Mahesh Burse, M.V.Manoj Varma, A.T.Anurag Tyagi, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-23476.txt.
Introduction
Janmejoy Sarkar and a large team of co-authors describe the testing and tuning of a solar telescope flown on India's Aditya-L1 mission, in a 2025 paper. The telescope takes pictures of the Sun in ultraviolet light, a band that reveals the Sun's lower atmosphere. Ground and in-flight checks were needed before its data could be trusted.
The team compares test results with the design targets and explains how raw readings are turned into clean data. Nearly every target was met. The one miss was sharpness: fine detail came out at a scale a bit coarser than hoped, which limits only the finest brightness measures. Even so, the authors say the telescope opens a fresh window on the Sun.
Catalog record
| CREATOR | J.Janmejoy Sarkar, V.N.VN Nived, S.Soumya Roy, R.D.Rushikesh Deogaonkar, S.Sreejith Padinhatteeri, R.B.Raja Bayanna, R.K.Ravi Kesharwani, A.R.A.N. Ramaprakash, DurgeshDurgesh Tripathi, R.G.Rahul Gopalakrishnan, B.J.Bhushan Joshi, S.S.Sakya Sinha, M.B.Mahesh Burse, M.V.Manoj Varma, A.T.Anurag Tyagi, |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 41 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-23476
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Test and Calibration of the Solar Ultraviolet Imaging Telescope (SUIT) on board Aditya-L1 J.Janmejoy Sarkar, V.N.VN Nived, S.Soumya Roy, R.D.Rushikesh Deogaonkar, S.Sreejith Padinhatteeri, R.B.Raja Bayanna, R.K.Ravi Kesharwani, A.R.A.N. Ramaprakash, DurgeshDurgesh Tripathi, R.G.Rahul Gopalakrishnan, B.J.Bhushan Joshi, S.S.Sakya Sinha, M.B.Mahesh Burse, M.V.Manoj Varma, A.T.Anurag Tyagi, R.Y.Reena Yadav, C.R.Chaitanya Rajarshi, H.A.H.N. Adithya, A.A.Abhijit Adoni, Gazi A. Ahmed, D.B.Dipankar Banerjee, R.B.Rani Bhandare, B.R.Bhargava Ram B. S, K.C.Kalpesh Chillal, P.C.Pravin Chordia, A.G.Avyarthana Ghosh, G.G.Girish Gowda, A.J.Anand Jain, M.J.Melvin James, E.J.Evangeline Leeja Justin, D.K.Deepak Kathait, A.R.K.Aafaque Khan, P.K.Pravin Khodade, A.K.Abhay Kohok, A.K.Akshay Kulkarni, G.K.Ghanshyam Kumar, N.M.Nidhi Mehandiratta, V.M.Vilas Mestry, D.M.Deepa Modi, S.M.Srikanth Motamarri, N.K.K. Nagaraju, D.N.Dibyendu Nandy, S.N.S. Narendra, S.N.Sonal Navle, N.P.Nashiket Parate, S.P.Sujit Punnadi, A.R.A. Ravi, K.S.K. Sankarasubramanian, G.S.Ghulam Sarvar, N.S.Nigar Shaji, S.S.Sami K. Solanki, R..Rethika T, K.V.Kaushal Vadodariya, D.V.D. R. Veeresha, R.V.R Venkateswaran Abstract The Solar Ultraviolet Imaging Telescope (SUIT) on board the Aditya-L1 mission observes the Sun in the 200–400 nm wavelength range. This paper presents the results of various on ground and on board tests and their comparison with the specifications. Moreover, we also present the scheme for data calibration. We demonstrate that the test results are compliant with the specified figures, except the spatial resolution. Such discrepancy will limit the photometric measurements only, at a scale of 2.2” instead of 1.4” as originally envisioned. The results obtained here show that SUIT observations open up a new window for solar observations. 1 Introduction The Solar Ultraviolet Imaging Telescope ( Tripathi et al., 2025 ; Tripathi et al., 2017 , SUIT;) is one of the primary instruments on board Aditya-L1 mission ( Seetha and Megala, 2017 ; Tripathi et al., 2023 ) . It observes the photosphere and chromosphere of the Sun in the near and mid ultraviolet wavelength range of 200–400 nm, and provides full disk and partial disk images with a plate scale of 0.7”/pixel. For this purpose, it utilizes 11 science filters and a back-thinned back-illuminated 4096 \times 4096 charge-coupled device (CCD) with a 12 micron pixel size and enhanced UV sensitivity. The spacecraft was launched on Sep 02, 2023 and was subsequently put into a halo orbit around L1 point on Jan 06, 2024. The telescope was switched on on Nov 20, 2023, with the first light taken on Dec 06, 2023. Since then, the telescope has been recording observations for various tests, calibration, and verification of the telescope. Fig. 1 displays fully calibrated science-ready full disk images recorded on May 17th, 2024, in all eleven filters as labeled. In this paper, we describe both on-ground and in-orbit tests and calibrations performed on SUIT. The rest of the paper is structured as follows. In § 2 we provide a brief overview to the instrument. We discuss the pre-flight tests performed on ground and the results in § 3 . The in-orbit test and results are discussed in § 4 . In § 5 , we discuss the calibration procedures for generating the science-ready Level 1 data products from raw Level 0 data. Figure 1: Full disk images in all eleven filters recorded by SUIT on May 17th, 2024. 2 Instrument Overview Figure 2: Schematic diagram of the Solar Ultraviolet Imaging Telescope. The internal components are labeled. Table 1: SUIT Instrument Characteristics Parameter Value Telescope Design f/24.8 off-axis Ritchey Chrétien Wavelength range 200 nm - 400 nm. Bandpass 8 Narrow-band, 3 Broad-band Entrance Aperture 146 mm Detector 4096 \times 4096, back-thinned, back- illuminated, UV-enhanced CCD Plate Scale 0.7”/pixel @ 12 \mu m pixel Exposure times 0.1 to 1.4 s Fastest Cadence 6 sec in RoI mode SUIT is an off-axis Ritchey-Chrétien type solar telescope operating in the 200–400 nm wavelength band. The instrument is mounted on the top deck of the Aditya-L1 spacecraft ( Seetha and Megala, 2017 ; Tripathi et al., 2023 , see) . Fig. 2 shows the schematic diagram of the telescope with its internal components. The critical parameters of the telescope are given in Table 1 . The front aperture of the optical cavity has a multi-operational door, which is operated during the spacecraft momentum dump events to prevent any contamination. The entrance aperture filter, called the thermal filter, is designed to transmit 0.01% of the incident sunlight into the optical cavity ( Ghosh et al., 2022 ; Sreejith et al., 2025 ) . This helps to regulate the temperature of the optical cavity and prevents saturation of the CCD. Science Central Bandpass Science Filter Wavelength (nm) (nm) target NB01 214.0 11.0 Continuum NB02 276.6 0.4 Mg II k blue wing NB03 279.6 0.4 Mg II k NB04 280.3 0.4 Mg II h NB05 283.2 0.4 Mg II h red wing NB06 300.0 1.0 Continuum NB07 388.0 1.0 CN Band NB08 396.85 0.1 Ca II h BB01 220.0 40.0 Herzberg Continuum BB02 277.0 58.0 Hartley Band BB03 340.0 40.0 Huggins Band Table 2: Science filters, central wavelength , and science target of the 11 science filters for SUIT. Refer to Sarkar et al. (2024) for further details on filters and their characterization. The telescope has an entrance aperture of 146 mm, with primary and secondary mirrors having diameters of 141 mm and 49 mm, respectively. Sunlight is reflected off the primary and secondary mirrors and is incident on the science filters mounted on two stacked filter wheels with 8 slots each. The two filter wheels generate eight narrow and three broad bandpasses by stacking specific filters (see Table 2 ). The filtered light passes through a field correction lens before getting imaged on the CCD. Detailed information on the filters and their characterization can be found in Sarkar et al. (2024) . The field correction lens is mounted on a piezo-electric linear stage, allowing \pm 3 mm movement along the optical axis. For calibration purposes, SUIT is equipped with an array of eight 355 nm and 255 nm LEDs each. This array of 16 LEDs is mounted before the science filters in the optical path. Light from the LEDs pass through the filters and field corrector lens before falling on the CCD. For more details see Tripathi et al. (2017) ; Tripathi et al. (2025) . The telescope also comprises of three baffles, viz. external, primary and secondary, as labeled in Fig. 2 . 3 Ground Tests and Results 3.1 Field of View (FOV) In order to check for any obstruction due to baffles in light passing through the SUIT optics, we performed a test to measure the field of view (FOV). This test was performed before mounting the CCD on the focal plane. For this purpose, we used a Fizeau interferometer and a f/3.5 transmission sphere with the beam focused on the focal plane of SUIT. The light passes through the telescope optics and is retro-reflected by a plane mirror kept at the entrance aperture of the telescope. The tilt of this mirror is varied to check the vignetting for various field angles. In the lab, the test was performed for \pm 23 mm, corresponding to \pm 0.37 ∘ , from the center of the imaging plane, in horizontal and vertical directions. Our analysis of this test reveals that there was no obstruction throughout this range. Note that while the original requirement for the FOV is 0.39 ∘ , due to mechanical / optical limitations,