The Construction of Asymptotic Bode Plots: A New Direct Method

Davide Tebaldi, Roberto Zanasi · 2025

Read The Construction of Asymptotic Bode Plots: A New Direct Method by Davide Tebaldi, Roberto Zanasi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-21667.txt.

Introduction

Davide Tebaldi and Roberto Zanasi offer a direct way to sketch asymptotic Bode plots, in a 2025 control engineering paper. These plots summarize how a system responds across frequencies, and a rough sketch often suffices for first analysis. The standard recipe, though, dissects every factor of the transfer function one by one, which grows slow and error-prone as systems gain parts.

Their method computes generalized approximating functions for the whole transfer function and draws the magnitude and phase sketches in one pass, using a small set of firm rules. The authors compare it with the classic approach and claim gains in orderliness, precision, and time, especially for functions with many factors. The paper targets students and practicing engineers alike.

Catalog record

CREATORDavide Tebaldi, Roberto Zanasi
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-21667

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The Construction of Asymptotic Bode Plots: A New Direct Method Davide Tebaldi, Roberto Zanasi Abstract Bode plots represent an essential tool in control and systems engineering. In order to perform an initial qualitative analysis of the considered systems, the construction of asymptotic Bode plots is often sufficient. The standard methods for constructing asymptotic Bode plots are characterized by the same drawbacks: they are not systematic, may be not precise and time-consuming. This is because they require the detailed analysis of the different factors composing the considered transfer function, meaning that more and more intermediate steps are required as the number of factors increases. In this paper, a new method for the construction of asymptotic Bode plots is proposed, which is based on the systematic calculations of the so-called generalized approximating functions and on the use of well defined properties. The proposed method is referred to as a direct method since it allows to directly draw the asymptotic Bode magnitude and phase plots of the complete transfer function without requiring the detailed analysis nor the plots construction of each factor. This latter feature also makes the proposed direct method more systematic, potentially more precise and less time-consuming compared to standard methods, especially when dealing with a large number of factors in the transfer function. The comparison of the proposed direct method with the standard approaches is performed, in order to examine the benefits offered by the direct method. pst-tools]printfont=Helvetica,fontscale=10,valuewidth=10,decimals=-1, xShift=0,yShift=0,trimSpaces=false,postString=,VarName=, comma=false,decimalSeparator=. pst-tools]science=false,round=false pst-node]trueAngle=false pst-node]storeNodeInfo=false pst-node]saveNodeCoors=false,showNode=false,markNode=false,NodeCoorPrefix= pst-node]nodealign=false pst-node]href=0 pst-node]vref=0.7ex pst-node]framesize=10pt pst-node]nodesep=0pt pst-node]arm=10pt pst-node]offset=0pt pst-node]angle=0 pst-node]arcangle=8 pst-node]ncurv=0.67 pst-node]pcRef=false pst-node]lineAngle=0 pst-node]loopsize=1cm pst-node]boxsize=0.4cm pst-node]nrot=0 pst-node]npos= pst-node]tpos=0.5 pst-node]shortput=none pst-node]colsep=1.5cm pst-node]rowsep=1.5cm pst-node]mcol=c pst-node]mnodesize=-1pt pst-node]mnode=R,emnode=none pstricks-add]blName=PSPbl,bcName=PSPbc,brName=PSPbr, clName=PSPcl,ccName=PSPcc,crName=PSPcr, tlName=PSPtl,tcName=PSPtc,trName=PSPtr pst-3d]viewpoint=1 -1 1 pst-3d]viewangle=0 pst-3d]normal=0 0 1 pst-3d]embedangle=0 pst-3d]Tshadowsize=1 pst-3d]Tshadowangle=60 pst-3d]Tshadowcolor=lightgray pstricks-add]CMYK=true pstricks-add]parallelogramsep=3mm pstricks-add]countDots=false,fillcolorA=blue,fillcolorB=red pstricks-add]tipAngle=60,tipLength=5mm,tipWidth=2mm,tipPos=0.2 pstricks-add]startColor=black,endColor=white,colorsteps=256 pstricks-add]saveSumValue=false pstricks-add]CMYK=true pstricks-add]GetFinalState=false,saveData=false,filename=PSTdata pstricks-add]XYoffset=0pt pstricks-add]PixelPlot=false,colorType=0,colorTypeDef= pstricks-add]chartStyle=pie pstricks-add]chartColor=gray pstricks-add]chartSep=10pt,chartStack=0,chartStackDepth=2cm,chartStackWidth=2cm,chartHeight=5mm pstricks-add]uselinecolor=false pstricks-add]userColor= pstricks-add]chartNodeI=0.75,chartNodeO=1.5 pstricks-add]cancelType= pstricks-add]markAngle=false pstricks-add]basename= pstricks-add]rotate=0 pstricks-add]colSteps=0,colored=false,colorOffset= pstricks-add]randomPoints=1000,color=false, whichabs=,whichord=, plotfuncx=,plotfuncy=,buildvector=false, Derive=,adamsorder=4, Tnormal=false, braceWidth=2bracePos=0.5, braceWidthInner=10braceWidthOuter=10chartNodeI=0.75, chartNodeO=1.5, markAngle=false, colSteps=0, colored=false, randInit, pst-plot]ignoreLines=0 pst-plot]outDelimiter= pst-plot]Hue=180 pst-plot]barwidth=0.25cm pst-plot]IQLfactor=1.5 pst-plot]postAction= pst-plot]mediancolor=black pst-plot]markMedian=false pst-plot]plotstyle=line pst-plot]plotpoints=50 pst-plot]PSfont=NimbusRomNo9L-Regu,fontscale=10,valuewidth=10,decimals=-1 pst-plot]xlabelsep=5pt,ylabelsep=5pt pst-plot]xyValues,ChangeOrder=false pst-plot]VarStep=false,PlotDerivative=none,VarStepEpsilon=default,polarplot=false,method= pst-plot]ticks=all pst-plot]labels=all pst-plot]Ox=0 pst-plot]Dx=1 pst-plot]dx=0 pst-plot]Oy=0 pst-plot]Dy=1 pst-plot]dy=0 pst-plot]showorigin=true pst-plot]labelFontSize=,mathLabel pst-plot]xAxis,yAxis pst-plot]xlabelPos=b, ylabelPos=l pst-plot]xyDecimals= pst-plot]xylogBase= pst-plot]trigLabelBase=0 pst-plot]fractionLabelBase=0 pst-plot]trigLabels=false pst-plot]fractionLabels=false pst-plot]logLines=none pst-plot]xlabelFactor=,ylabelFactor=,showOriginTickpst-plot]markPoint pst-plot]ticksize=-4pt 4pt pst-plot]tickstyle=full pst-plot]subticksize=0.75,subticks=1,tickcolor=black,ticklinestyle=solid, subticklinestyle=solid,subtickcolor=gray,tickwidth=0.5subtickwidth=0.25labelOffset=0pt,frameOffset=0pt pst-plot]nStep=1, nStart=0, nEnd=,xStep=0, yStep=0, xStart=, xEnd=, yStart=, yEnd=, plotNo=1,plotNoMax=1,plotNoX=1,plotYMax= pst-plot]axesstyle=axes pst-plot]xLabels=,xLabelsRot=0 pst-plot]yLabels=,yLabelsRot=0 pst-plot]xAxisLabel=x,yAxisLabel=y pst-plot]yAxisLabelPos=,xAxisLabelPos= pst-plot]llx=lly=urx=ury= pst-plot]psgrid=false,gridpara=gridlabels=0pt,gridcolor=red!30,subgridcolor=green!30,subgridwidth=0.5subgriddiv=5,gridcoor= pst-plot]axespos=b pst-coil]coilaspect=45,coilarm=.5cm,coilheight=1,coilwidth=1cm,coilinc=10 pst-coil]bow=0 pst-coil]periods=1,amplitude=1,ppoints=360,function=sin I INTRODUCTION Bode plots, Nyquist plots and Nichols plots [ 1 ] are different graphical representations of the frequency response function, which exhibit different characteristics with respect to each other while carrying the same informative content. Nyquist and Nichols plots are composed of a single diagram, sketching imaginary versus real part and modulus versus phase in the case of Nyquist and Nichols plots, respectively. Nichols plots employ decibels, a logaritmic unit of measurement, for the magnitude representation, and therefore allow for an effective representation of both large and low magnitude values. Despite providing a less detailed representation of the frequency response function, Nyquist plots find applications in control theory such as the Nyquist stability criterion [ 2 ] , the passivity analysis of physical systems, and the design of lead/lag networks [ 3 ] . On the other hand, Bode plots also employ decibels for the magnitude representation, and therefore share a common advantage with Nichols plots. However, Bode plots are composed of two separated diagrams for the phase and magnitude representation, respectively, as a function of the angular frequency, and therefore allow for a more detailed representation of the frequency response function compared to Nyquist and Nichols plots. Bode plots were invented in 1938 by Hendrik Wade Bode [ 4 ] , and are widely used nowadays for the analysis of linear systems [ 5 , 6 , 7 ] . Their uses in control theory include the stability analysis of closed-loop systems, through the Bode stability criterion [ 8 ] and through the reading of the phase and gain margins of the system [ 9 ] . Bode plots are also used to evaluate the dynamic performances of open and closed-loop systems by reading the bandwidth and, consequently, the rising time [ 10 ] , as well as to design different types of compensators [ 11 , 12 ] that can be used for different applications [ 13 ] including DC motor control [ 14 ] . The usefulness of Bode plots extends to other engineering and non-engineering fields as well. In [ 15 ] , Bode plots are used to perform the graphical analysis of electrochemical impedance spectroscopy data, while in [ 16 ] and [ 17 ] they are used to evaluate the corrosion in micro/nanocapsulated polymeric coatings and to perform the frequency response of a simplified tank model, respectively. Whenever a detailed and punctual analysis of the considered system is desired, the Bode magnitude and phase plots are typically constructed by making use of computer aided control system design software, such as the Control System Toolbox available in the MATLAB/Simulink environment [ 18 ] , LabVIEW [ 19 ] , and others. However, precision is sometimes not the primary goal for a first qualitative system analysis, while speed and qualitative behavior may be the objectives instead. In these cases, asymptotic Bode plots are preferred [ 20 ] . The manual construction of asymptotic Bode plots is indeed still a necessary knowledge which every control engineer should have for different purposes, including the capability of performing an initial qualitative analysis of the system under consideration. The standard methods for the construction of asymptotic Bode plots can be classified into two approaches. The first approach consists into the identification of the different factors composing the considered transfer function [ 21 ] . Once the factors have been identified, the asymptotic Bode magnitude and phase plots of each factor need to be plotted. The asymptotic Bode magnitude and phase plots of the complete transfer function can finally be obtained by adding together the asymptotic plots of each factor. As far as the second approach is concerned, the asymptotic magnitude plot is obtained by first constructing the low-frequency magnitude asymptote, and then introducing the changes in slope given by the different factors [ 1 ] . The asymptotic phase plot is obtained by first computing the low-frequency phase, and then introducing the changes in phase given by the different factors [ 1 ] . The standard methods for constructing asymptotic Bode plots are characterized by the same drawbacks: they are not systematic, may be not precise and time-consuming. This is because they require the detailed analysis of the different factors composing the considered transfer function, meaning that more and more intermediate steps are required as the number of factors increases. In this paper, a new method for the construction of asymptotic Bode plots is proposed, which is based on the systematic calculations of the so-called generalized approximating functions and on the use of well defined properties. The proposed method is referred to as a direct method since it allows to directly draw the asymptotic Bode magnitude and phase plots of the complete transfer function without requiring the detailed analysis nor the plots construction of each factor. This paper is structured as follows. The contextualization and definitions needed for the proposed method are first given in Sec. II , followed by the presentation of the proposed

Read the complete text