Low-loss silicon nitride Kerr-microresonators fabricated with metallic etch masks via metal lift-off
Gabriel M. Colación, Lala Rukh, Franco Buck, Tara E. Drake · 2025
Read Low-loss silicon nitride Kerr-microresonators fabricated with metallic etch masks via metal lift-off by Gabriel M. Colación, Lala Rukh, Franco Buck, Tara E. Drake (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-21301.txt.
Introduction
Gabriel Colacion and three co-authors report a better way to carve tiny light circuits in a 2025 paper. Silicon nitride is a favored material for chips that guide light, but it resists the etching process, so the masks used to pattern it must be thick and tall. Those tall masks distort the etch and spoil the walls of the guides.
The team instead lays down a thin metal mask by a lift-off method, which cut the needed mask thickness by about forty-five times. With it they etched ring-shaped resonators with near-vertical walls and very low light loss. The clean rings let them generate frequency combs, sets of evenly spaced light tones, spanning more than an octave with extra side peaks. The authors present metal lift-off as a simple route to high-quality light circuits.
Catalog record
| CREATOR | Gabriel M. Colación, Lala Rukh, Franco Buck, Tara E. Drake |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-21301
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Low-loss silicon nitride Kerr-microresonators fabricated with metallic etch masks via metal lift-off Gabriel M. Colación, Lala Rukh, Franco Buck, Tara E. Drake Abstract Stoichiometric silicon nitride has emerged as a widely used integrated photonic material owing to its high index of refraction, nonlinear optical properties, and broad transparency window spanning visible to mid-IR frequencies. However, silicon nitride is generally more resistant to reactive ion etching than are typical etch masks made of polymer-based resist. This necessitates resist layers that are significantly thicker than the silicon nitride and results in mask patterns which are tall and narrow. These high-aspect-ratio patterns inhibit the plasma transport of reactive ion etching, which leads to difficulties in accurately reproducing dimensions and creating well-defined, vertical waveguide sidewalls. In this work, we overcome these challenges by developing a metallic etch mask that provides a 30:1 nitride-to-metal etch rate ratio, representing a near 20-fold reduction in the required mask thickness. We demonstrate the quality of this technique by etching microring resonators with near-vertical waveguide sidewalls and intrinsic quality factors of over 1 million. Leveraging the low optical loss of our resonators, we generate optical frequency combs with more than an octave of bandwidth and dual dispersive waves. These results establish metal lift-off as a viable and easy-to-implement technique capable of producing low optical loss waveguides. I Introduction Developing photonic integrated circuits to replace tabletop optics analogs represents a compelling new direction in many sectors of scientific research and development, including next-generation timing and navigation [ 1 , 2 , 3 ] , optical computation [ 4 , 5 , 6 ] , and chip-scale quantum computers [ 7 , 8 , 9 ] . Similar to the integrated circuit (IC) revolution of the 20th century, the past two decades have seen rapid innovation in photonic integrated circuits (PICs), often aided by existing IC fabrication expertise. However, unlike their electronic antecedents, bulk commercial availability of PICs is in its infancy [ 10 ] . In order to move this technology from the lab to the market, optical scientists and engineers often must adapt specialized processes developed in academic cleanrooms for the standard tools of IC- and MEMS-based commercial-scale foundries [ 11 ] . A good illustration of the difficulty of translating PIC fabrication to foundry processes is the on-chip waveguide. Waveguides are ubiquitous in PIC design as the main way of porting photons from device to device. Waveguides can also be formed into resonators [ 12 , 13 ] , couplers and splitters [ 14 ] , dichroic elements [ 15 , 16 ] , gratings [ 17 , 18 ] , and electro-optic components [ 19 ] . They are generally made of a material that is transparent within the spectrum of interest and are thus typically formed in dielectrics with large band gaps. A typical scheme for waveguide fabrication involves depositing a layer of photo- or electron resist on top of the dielectric, lithographically defining a pattern in the resist to serve as a protective mask, and removing the dielectric not protected by the mask through reactive ion etching (RIE) [ 20 , 21 , 22 , 23 , 24 ] . However, commonly used dielectrics such as silica (SiO {}_{\text{2}} ), silicon nitride (Si {}_{\text{3}} N {}_{\text{4}} ), aluminum nitride (AlN), and lithium niobate (LiNbO {}_{\text{3}} ) are resistant to the physical and chemical etching of RIE. In fact, the ratio of the etching rate of the dielectric compared to that of the resist mask, the etch selectivity, is often less than 1:1 [ 25 ] . This creates challenges for fabrication, as the protective masks must be thicker than the dielectric to outlast the etching. These thick masks with tall, narrow features exhibit inhibited plasma transport and increased etch by-product redeposition as a function of feature size [ 26 ] . This can lead to non-uniform etching rates between features of varying sizes, sidewalls with non-vertical and/or bowed profiles, and deviations in device dimensions from the intended design. For applications that require deterministic control of properties that depend on accurate geometries and dimensions, such as resonator dispersion and coupler efficiency, etch masks of thick resist represent a significant problem. These complications can be partially alleviated with harder, more resistant masks such as hydrogen silsesquioxane (HSQ), but post-etch removal of HSQ necessitates the use of strong acids which will also remove Si {}_{\text{3}} N {}_{\text{4}} [ 27 ] . An alternative approach to subtractive fabrication consists of depositing Si {}_{\text{3}} N {}_{\text{4}} into pre-etched SiO {}_{\text{2}} trenches; this method is particularly suited to creating thick waveguides while avoiding tensile stress and cracking. However, the SiO {}_{\text{2}} preform etching is still subtractive, and thus the problems of sloped sidewalls and inaccurate dimensions persist [ 28 , 29 ] . In this work, we develop a process for the subtractive fabrication of silicon nitride microring waveguides using a metal-lift-off-based mask and subsequent subtractive etching. Metal lift-off is a common MEMS process that can be found in most commercial foundries. Metal lift-off’s suitability for patterning small features in a scalable manner makes it a particularly good candidate for patterning photonic etch masks [ 30 , 31 ] . The metal mask in our work demonstrates improved etch selectivity of 30:1, allowing thin layers of metal to protect and template thick layers of silicon nitride. Our results show vertical sidewall angles, minimal RIE lag, and predictable etch dimensions. We optically characterize ring resonators to demonstrate reasonably low optical loss and good resonator quality factors. Furthermore, we investigate our leading sources of loss and suggested improvements to this process in the case when ultra-low loss is necessary. Finally, we demonstrate the viability of our process by generating broad optical frequency combs with more than an octave of bandwidth, as well as creating long-lived optical soliton states, in our microring resonators. II Fabrication Process The waveguides under study are fabricated on chiplets cut from stoichiometric Si {}_{\text{3}} N {}_{\text{4}} (hereafter SiN) deposited in-house on oxidized silicon wafers. The SiN layer is deposited on top of 3 µm of SiO {}_{\text{2}} via low-pressure chemical vapor deposition (LPCVD) in a two-stage deposition process for a total thickness of 620 nm. Figure 1: Illustration of the process for fabricating waveguides using metal lift-off. (a) Electron-beam lithography (EBL). The process begins by coating the SiN sample with resist and writing the inverse pattern using EBL. (b) Resist development. After developing the patterned resist, the exposed (negative-tone) resist is left behind. (c) Metal deposition. A uniform layer of metal is deposited on the surface via electron beam evaporation. (d) Metal lift-off. A solvent soak/rinse removes the resist and overlaying metal to leave behind a protective etch mask. (e) ICP-RIE etching. The etch mask pattern is transferred to the SiN. (f) Mask removal. The final device is a SiN microring resonator with evanescent coupling to a bus waveguide. The full fabrication flow from unpatterned SiN chiplet to final optical device is illustrated in Fig. 1 . We start with electron-beam lithography (EBL) using a JEOL JBX6300-FS to write the negative of our waveguide design in a layer ma-N 2403 negative-tone EBL resist. We employ negative-tone resist as it allows us to reduce the required EBL write area with