Value of risk-contact data from digital contact monitoring apps in infectious disease modeling
Martijn H. H. Schoot Uiterkamp, Willian J. van Dijk, Hans Heesterbeek, Remco van der Hofstad, Jessica C. Kiefte-de Jong, Nelly Litvak · 2025
Read Value of risk-contact data from digital contact monitoring apps in infectious disease modeling by Martijn H. H. Schoot Uiterkamp, Willian J. van Dijk, Hans Heesterbeek, Remco van der Hofstad, Jessica C. Kiefte-de Jong, Nelly Litvak (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-21228.txt.
Introduction
Martijn Schoot Uiterkamp and co-authors show how contact app data can feed disease spread models, in a 2025 paper. During the COVID-19 years, phone apps logged whom people met, a new kind of data for modelers. Its worth beside classic sources was unclear.
Their trick rewrites the count of infectious people using the share of contacts that involved an infected person. From just two daily numbers, average contacts and the risky share of them, the spread rate can be estimated. Applied to two Dutch app data sets, the estimates matched those from case and hospital counts in timing and size. Cheap app data may thus anchor epidemic tracking.
Catalog record
| CREATOR | Martijn H. H. Schoot Uiterkamp, Willian J. van Dijk, Hans Heesterbeek, Remco van der Hofstad, Jessica C. Kiefte-de Jong, Nelly Litvak |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 45 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-21228
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Value of risk-contact data from digital contact monitoring apps in infectious disease modeling Martijn H. H. Schoot Uiterkamp, Willian J. van Dijk, Hans Heesterbeek, Remco van der Hofstad, Jessica C. Kiefte-de Jong, Nelly Litvak Abstract In this paper, we present a simple method to integrate risk-contact data, obtained via digital contact monitoring (DCM) apps, in conventional compartmental transmission models. During the recent COVID-19 pandemic, many such data have been collected for the first time via newly developed DCM apps. However, it is unclear what the added value of these data is, unlike that of traditionally collected data via, e.g., surveys during non-epidemic times. The core idea behind our method is to express the number of infectious individuals as a function of the proportion of contacts that were with infected individuals and use this number as a starting point to initialize the remaining compartments of the model. As an important consequence, using our method, we can estimate key indicators such as the effective reproduction number using only two types of daily aggregated contact information, namely the average number of contacts and the average number of those contacts that were with an infected individual. We apply our method to the recent COVID-19 epidemic in the Netherlands, using self-reported data from the health surveillance app COVID RADAR and proximity-based data from the contact tracing app CoronaMelder. For both data sources, our corresponding estimates of the effective reproduction number agree both in time and magnitude with estimates based on other more detailed data sources such as daily numbers of cases and hospitalizations. This suggests that the use of DCM data in transmission models, regardless of the precise data type and for example via our method, offers a promising alternative for estimating the state of an epidemic, especially when more detailed data are not available. 1 Introduction Background. During the outbreak of an infectious disease, monitoring interactions between individuals provides useful information on the spread of the disease within the population. Information on social contacts has been used frequently in mathematical models of infectious disease transmission [ 1 ] . The two primary methods to collect this information have been diary-based social contact surveys [ 2 ] and field experiments involving proximity-measuring sensors (see [ 3 ] and the references therein). Contact data obtained via either method have been successfully used to infer infection dynamics within a population and, in particular, to identify contact networks and heterogeneity in contact behavior [ 4 ] . However, most surveys and experiments are only conducted incidentally and not continuously on the daily level [ 5 ] . As a consequence, data from these sources is of limited use for continuously estimating short-term changes in key indicators during an ongoing epidemic. Contact data from digital contact monitoring (DCM) apps that were in use during an actual epidemic could potentially be used to address this limitation of current methods and sources of contact data. During the COVID-19 pandemic, many such apps have been developed and have continuously been collecting contact data. Here, we use the term DCM to refer to both digital contact tracing (DCT) and to public health surveillance via self-reporting of, e.g., symptoms and risk behavior. Most of these apps were developed to replace or complement manual contact tracing, in part because their use is less labor-intensive, more time-efficient, and highly scalable (see, e.g., [ 6 ] and the references therein). Despite the benefits of DCM compared to traditional methods and sources, it is currently unclear to what extent these contact data are useful in transmission modeling. For instance, there is no clear consensus on the effectiveness of DCT in terms of reducing the number of infections. On the one hand, multiple simulation studies find that the fraction of contacts captured by DCT increases approximately quadratically with the number of users [ 7 , 8 ] . On the other hand, empirical evidence suggests that the proportion of asymptomatic cases among those detected purely as a consequence of DCT app use is small [ 9 ] . This implies that most infections detected via DCT could also have been detected in the absence of DCT, given a high willingness to test after symptom onset. Another potential limitation in the use of contact data obtained from DCM apps is that the few contact data that are stored by DCT apps are very coarse and typically contain few or even no details on the registered contacts, such as user demographics. In particular, public versions of these DCT data are limited to counts on positive test results of DCT app users. This is because of the delicate balance between obtaining sufficient information on infectious contacts and preserving privacy of users [ 10 ] . For instance, individual location data from GPS-based DCT apps should be anonymized and aggregated so that individual travel patterns cannot be reconstructed [ 11 ] . To comply with such requirements, most DCT apps that were developed during the COVID-19 epidemic had a decentralized design where as few privacy-sensitive data as possible were shared and stored [ 12 ] . Our contributions. Altogether, the question remains to which extent DCM data is useful to inform transmission models. The goal of this paper is first of all to demonstrate the use of such data to initialize a conventional susceptible-exposed-infectious-recovered (SEIR) compartmental model. We then characterize the validity by estimating key indicators such as the effective reproduction number and the number of infectious individuals. We take the COVID-19 pandemic in the Netherlands as our use-case to compare our estimates with published values derived from detailed patient, testing and hospital data. Compared to other methods for estimating these quantities, our approach does not require model calibration or statistical estimation of transmission rates. Instead, we express the number of infectious individuals as a function of the proportion of contacts that were with infected individuals and initialize this value directly from the available data. Subsequently, we estimate the remaining compartments of the model and estimate the effective reproduction number using the method of [ 13 ] . We also present an approximation for the effective reproduction number that only requires the data on contacts with infected individuals and the generation interval and thus is robust against any misspecifications in the latent, infectious, and immunity periods and the specific method used to initialize the compartmental model. This approximation is based on the assumption that the relative daily change in the number of susceptible individuals is small, which is particularly the case at the start of an epidemic when almost the entire population is susceptible. We compare two different approaches to initialize the aggregated contact rate with infected individuals that use different methodologies for data collection. The first approach is based on self-reported data on close contacts and contacts with infected individuals that were collected via the public health surveillance app COVID RADAR [ 14 ] , from April 2020 to February 2022. App users could, on a daily basis, submit a short questionnaire on COVID-19 related symptoms and risk behavior. In particular, users were asked to report whether they had been in contact with an infected individual in the preceding 14 days. For each reported contact with an infected individuals, we infer the