Filtered Multi-Tone Spread Spectrum with Overlapping Subbands
Brian Nelson, Hussein Moradi, Behrouz Farhang-Boroujeny · 2025
Read Filtered Multi-Tone Spread Spectrum with Overlapping Subbands by Brian Nelson, Hussein Moradi, Behrouz Farhang-Boroujeny (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-20966.txt.
Introduction
Brian Nelson, Hussein Moradi, and Behrouz Farhang-Boroujeny reshape a spread spectrum waveform by letting its bands overlap, in a 2025 arXiv paper. Spread spectrum hides a signal across a wide band for hardy links. In the old form, tone bands sat apart with dead gaps between them, which left the power curve bumpy.
The new form plants extra tones right in those gaps. The team works out when the power curve flattens most and when the crosstalk from the overlap cancels. They also pick spread gains that keep the peak to mean power low, and test clipping as a further trim. A multi code trick then lifts the data rate at small cost to that peak. The aim is a waveform fit for more jobs.
Catalog record
| CREATOR | Brian Nelson, Hussein Moradi, Behrouz Farhang-Boroujeny |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 56 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-20966
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Filtered Multi-Tone Spread Spectrum with Overlapping Subbands Brian Nelson, Hussein Moradi, Behrouz Farhang-Boroujeny Abstract A new form of the filter bank multi-carrier spread spectrum (FBMC-SS) waveform is presented. This new waveform modifies the filtered multi-tone spread spectrum (FMT-SS) system, and is intended to whiten the power spectral density (PSD) of the transmit signal. In the conventional FMT-SS, subcarrier bands are non-overlapping, leaving a spectral null between the adjacent subcarrier bands. To make FMT-SS more appealing for a broader set of applications than those studied in the past, we propose adding additional subcarriers centered at these nulls and thoroughly explore the impact of the added subcarriers on the system performance. This modified form of FMT-SS is referred to as overlapped FMT-SS (OFMT-SS). We explore the conditions required for maximally flattening the PSD of the synthesized OFMT-SS signal and for cancelling the interference caused by overlapping subbands. We also explore the choices of spreading gains that result in a low peak-to-average power ratio (PAPR) for a number of different scenarios. Further reduction of the PAPR of the synthesized signal through clipping methods is also explored. Additionally, we propose methods of multi-coding for increasing the data rate of the OFMT-SS waveform, while minimally impacting its PAPR. ©2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. I Introduction The use of filter bank multi-carrier spread spectrum (FBMC-SS) has been reported in a number of publications, e.g., [ 1 , 2 , 3 , 4 , 5 , 6 ] . All these works make use of filtered multi-tone (FMT) for signal synthesis, thus, may be referred to as FMT-SS. As compared to the more conventional spread spectrum techniques, such as, direct sequence spread spectrum (DS-SS) and frequency hopping spread spectrum (FH-SS) methods, FMT-SS is shown to be more robust to partial-band interferers, as the filter bank structure allows straightforward removal of interferences at a cost of reduced processing gain, [ 4 ] . Though FMT-SS has the above advantages when compared to conventional spread spectrum techniques, it is known to suffer from a non-flat power spectral density (PSD) which follows since subcarrier bands, by design, are non-overlapping. This leaves a spectral null between each pair of adjacent subcarrier bands, i.e. a portion of the transmission band without any transmission power. An example of such PSD is presented in Fig. 1 (a). For a given transmit power, the presence of spectral nulls in the PSD of the synthesized signal increases the peak(s) of the PSD, hence, results in an increased interference to other communications over the active subcarrier bands. In addition, the presence of these spectral nulls reveals a transmitter’s identity and parameters to an unauthorized observer that wishes to detect the transmitted information and/or to intercept the communication. For many applications, having a flat transmit PSD can provide other benefits as well. Here, we highlight three well-suited applications to FBMC-SS that would benefit from a flat transmission PSD: (i) underlay communications for network setup in a cognitive radio system, (2) skywave high-frequency (HF) for long-haul communications, (3) ultra-wideband (UWB) communications over short ranges. In [ 4 , 7 ] , FMT-SS was suggested as an underlay communication channel to exchange spectral information among the nodes in a cognitive radio network. To minimize interference to other radios that may be using the same spectrum, it will be advantageous to keep the PSD of the synthesized signal as low as possible. FMT-SS application for communications over skywave HF channels (in the 3 to 30 MHz spectrum) has been explored in the past [ 8 , 9 ] . In this domain, spectral allocations are nearly uncontrolled and thus interference among different users of the HF spectrum are likely. Keeping the PSD of the transmitted signals flat, hence, minimizing the peak of the PSD, here also is of great value. Ultra-wideband (UWB) waveforms have been proposed for short range communications over the spectral bands that have been licensed for a variety of applications. In order to avoid interference with the licensed users of these spectral bands, the Federal Communications Commission (FCC) has mandated that the PSD of any UWB waveform remains below a spectral mask at the transmitter antenna output [ 10 ] . The use of filter banks for UWB communications have been recently proposed in [ 11 ] . Making use of a form of FBMC-SS with a flat PSD will double the transmission power compared to its FMT-SS counterpart, hence, may significantly improve on the transmission range. To remove the FMT-SS spectral profile, an alternative approach that results in a flat spectrum was proposed in [ 12 ] . In this work, FMT is replaced by the staggered multi-tone (SMT) modulation, [ 13 ] . SMT uses offset quadrature amplitude modulation (OQAM) for overlapping of adjacent subcarrier bands, hence, leading to a near flat PSD of the synthesized signal. However, the design presented in [ 12 ] uses an FMT-SS preamble to perform synchronization and channel estimation, thus maintaining the undesirable spectral profile for a portion of the transmission. In this paper, we introduce an alternative FBMC-SS approach with a flat PSD that can be used for both the preamble and payload portions of the packet. This approach modifies the FMT-SS approach discussed in [ 4 ] by inserting additional subcarriers over the null bands with the goal of flattening the PSD of the synthesized signal. The modified waveform is referred to as overlapped FMT-SS (OFMT-SS). An example of the PSD of subcarriers of OFMT-SS is presented in Fig. 1 (b). Fig. 1: A plot of subcarrier PSDs in (a) FMT-SS and (b) OFMT-SS. In OFMT-SS, the additional subcarriers, indicated in orange color, are added to fill in the null bands. Although inserting subcarriers in the FMT null bands removes regular null bands from its spectral profile, overlapping of the subcarriers may introduce other problems including inter-carrier interference (ICI) and some other form of fluctuations in the PSD of the synthesized signal. We introduce design methods that minimize the ICI as well as PSD fluctuation caused by overlapping of subcarriers. We also present design approaches that keep the peak-to-average power ratio (PAPR) of the synthesized signal at a minimum level, while increasing data rate through a multi-coding method. To be more specific, this paper makes the following contributions. • OFMT-SS waveform is proposed as an effective multi-carrier spread spectrum method. • A pulse-shape design that removes ICI among adjacent subcarriers and leads to a perfectly flat spectrum in the transmit signal is developed. • A multi-code method that enables variable data rate OFMT-SS transmissions is explored. Making use of simulated annealing, a code design method that results in a relatively low PAPR is presented. • Methods that limit the PAPR of OFMT-SS signals are suggested. These methods are shown to be very effective in this application. It is shown that the PAPR of OFMT-SS can be reduced to as low as 4 dB (or, even