Rapid Construction of Joint Pulsar Timing Array Datasets: The Lite Method
B. Larsen, C. M. F. Mingarelli, P. T. Baker, J. S. Hazboun, S. Chen, L. Schult,S. R. Taylor, J. Simon, J. Antoniadis, J. Baier, R. N. Caballero, A. Chalumeau, Z. Chen, I. Cognard, D. Deb,V. Di Marco, T. Dolch, I. O. Eya, E. C. Ferrara, K. A. Gersbach, D. C. Good, H. Hu,A. Kapur, S. Kala, M. Kramer, · 2025
Read Rapid Construction of Joint Pulsar Timing Array Datasets: The Lite Method by B. Larsen, C. M. F. Mingarelli, P. T. Baker, J. S. Hazboun, S. Chen, L. Schult,S. R. Taylor, J. Simon, J. Antoniadis, J. Baier, R. N. Caballero, A. Chalumeau, Z. Chen, I. Cognard, D. Deb,V. Di Marco, T. Dolch, I. O. Eya, E. C. Ferrara, K. A. Gersbach, D. C. Good, H. Hu,A. Kapur, S. Kala, M. Kramer, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-20949.txt.
Introduction
Bjorn Larsen and co-authors present a fast way to build joint pulsar timing data sets, in a 2025 paper. Pulsar timing arrays watch spinning neutron stars for the faint stretch of nanohertz gravitational waves. Combining decades of data from many telescopes takes years, which shuts out fresh observations. Their Lite method picks the best available data set for each pulsar by a figure of merit, instead of waiting for a full merge.
Tested on the second international data release, the Lite version still detected the shared red noise signal. Its strength estimate ran a bit high, likely from single-pulsar systematics. The full data set remained better at resolving the telltale correlation pattern between pulsars. A halfway subset taken early in merging matched the full set surprisingly well. The authors offer Lite as a route to quick, preliminary wave limits.
Catalog record
| CREATOR | B. Larsen, C. M. F. Mingarelli, P. T. Baker, J. S. Hazboun, S. Chen, L. Schult,S. R. Taylor, J. Simon, J. Antoniadis, J. Baier, R. N. Caballero, A. Chalumeau, Z. Chen, I. Cognard, D. Deb,V. Di Marco, T. Dolch, I. O. Eya, E. C. Ferrara, K. A. Gersbach, D. C. Good, H. Hu,A. Kapur, S. Kala, M. Kramer, |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 110 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-20949
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Rapid Construction of Joint Pulsar Timing Array Datasets: The Lite Method B. Larsen, C. M. F. Mingarelli, P. T. Baker, J. S. Hazboun, S. Chen, L. Schult,S. R. Taylor, J. Simon, J. Antoniadis, J. Baier, R. N. Caballero, A. Chalumeau, Z. Chen, I. Cognard, D. Deb,V. Di Marco, T. Dolch, I. O. Eya, E. C. Ferrara, K. A. Gersbach, D. C. Good, H. Hu,A. Kapur, S. Kala, M. Kramer, M. T. Lam, W. G. Lamb, T. J. W. Lazio, K. Liu, Y. Liu,M. McLaughlin, D. J. Nice, B. B. P. Perera, A. Petiteau, S. M. Ransom, D. J. Reardon, C. J. Russell, G. M. Shaifullah,L. Speri, A. Srivastava, G. Theureau, J. Wang, J. Wang, and L. Zhang Affiliations are at the end of the paper Abstract The International Pulsar Timing Array (IPTA)’s second data release (IPTA DR2) combines decades of observations of 65 millisecond pulsars from 7 radio telescopes. IPTA datasets should be the most sensitive datasets to nanohertz gravitational waves (GWs), but take years to assemble, often excluding valuable recent data. To address this, we introduce the IPTA “Lite” analysis, where a Figure of Merit is used to select an optimal PTA dataset to analyze for each pulsar, enabling immediate access to new data and preliminary results prior to full combination. We test the capabilities of the Lite analysis using IPTA DR2, finding that “DR2 Lite” can be used to detect the common red noise process with an amplitude of A = 4.8 − 1.8 + 1.8 × 10 − 15 A=4.8^{+1.8}_{-1.8}\times 10^{-15} at γ = 13 / 3 \gamma=13/3 . This amplitude is slightly large in comparison to the combined analysis, and likely biased high as DR2 Lite is more sensitive to systematic errors from individual pulsars than the full dataset. Furthermore, although there is no strong evidence for Hellings-Downs correlations in IPTA DR2, we still find the full dataset is better at resolving Hellings-Downs correlations than DR2 Lite. Alongside the Lite analysis, we also find that analyzing a subset of pulsars from IPTA DR2, available at a hypothetical “early” stage of combination (EDR2), yields equally competitive results as the full dataset. Looking ahead, the Lite method will enable rapid synthesis of the latest PTA data, offering preliminary GW constraints before the superior full dataset combinations are available. 2025 Rapid Construction of Joint Pulsar Timing Array Datasets: The Lite Method – A 1 Introduction Pulsar Timing Arrays (PTAs) are experiments for detecting low-frequency gravitational waves (GWs), offering unprecedented access to nanohertz GWs ( Sazhin, 1978 ; Detweiler, 1979 ; Hellings & Downs, 1983 ) . By monitoring the ultra-stable arrival times of radio pulses from millisecond pulsars (MSPs)—nature’s most precise clocks—we can build a galaxy-scale GW detector. PTAs use deviations in the time of arrivals (TOAs) induced by GWs to infer their presence, enabling the detection of signals from supermassive black hole binaries (SMBHBs; Begelman et al. 1980 ), the stochastic gravitational wave background (GWB) which should arise from their cosmic merger history ( Rajagopal & Romani, 1995 ; Volonteri et al., 2003 ) , and potentially new physics ( Lasky et al., 2016 ; Caprini & Figueroa, 2018 ; Afzal et al., 2023 ) . Currently, PTA collaborations around the globe, including the European PTA (EPTA; Desvignes et al. 2016 ), the North American Nanohertz Observatory for Gravitational Waves (NANOGrav; Ransom et al. 2019 ), the Parkes PTA (PPTA; Manchester et al. 2013 ), the Chinese PTA (CPTA; Lee 2016 ), the Indian PTA (InPTA; Joshi et al. 2018 ), the MeerKAT PTA (MPTA; Miles et al. 2023 ), and the Fermi \gamma -ray PTA ( \gamma PTA; FERMI-LAT Collaboration et al. 2022 ) provide PTA datasets of varying sensitivity and duration. The International Pulsar Timing Array (IPTA) is a consortium of PTA collaborations, with the first and second data releases, IPTA DR1 ( Verbiest et al., 2016 ) and IPTA DR2 ( Perera et al., 2019 ) , each combining pulsar observations from EPTA, NANOGrav, and PPTA into one coherent dataset. A third IPTA data release, IPTA DR3, is currently in development, with the potential to include data from all current PTAs. Data combination improves a PTA’s sensitivity to GWs by increasing the pulsars’ effective observation timespan, cadence, and radio frequency coverage, as well as the PTA’s overall number of pulsars and sky coverage. This was expected by Siemens et al. (2013) and verified in the IPTA DR2 GWB search ( Antoniadis et al., 2022 ) , which found evidence for a common red noise (CRN; also known as CURN, Chen et al. 2021a ; Agazie et al. 2024 ) process, a signature of an emerging GWB signal, with greater significance than the individual constituent datasets comprising IPTA DR2. This provided a robust confirmation of the CRN first found by the regional PTA collaborations ( Arzoumanian et al., 2020b ; Goncharov et al., 2021b ; Chen et al., 2021b ) . Name Short Description Full DR2 The fully-combined IPTA DR2 from Perera et al. (2019) , with T_{\mathrm{obs}}>3 years filter from Antoniadis et al. (2022) for 53 pulsars in total. DR2 Lite The Lite dataset presented in this work, with a total of 53 pulsars selected using the FoM from single-PTA data subsets of Full DR2. EDR2 An “early” subset of Full DR2 which includes fully-combined data for only 22 pulsars corresponding to the highest FoM in DR2 Lite. Table 1: Names and short descriptions of the three datasets we analyze in this work. § 2 provides further details on each of the datasets. While it did not produce the first published measurement of a CRN process, we point out that IPTA DR2 could have presented the earliest opportunity to detect the CRN, as regional PTAs needed to collect approximately \sim 2 more years of data than was used for IPTA DR2 in order to sufficiently resolve the signal. The delay in the IPTA DR2 analysis largely resulted from the resource-intensive process of data combination, which requires meticulous handling of different kinds of data, alignment of timing models, fitting for instrumental offsets, and iterative noise modeling across datasets ( Verbiest et al., 2016 ; Perera et al., 2019 ) . This effort typically takes several years to complete, meaning by the time a combined dataset is released, portions of the underlying data are already outdated. To illustrate the timescales, IPTA DR2 contains the NANOGrav 9-yr dataset ( Arzoumanian et al., 2016 ) , but IPTA DR2 was not published until 3 years later ( Perera et al., 2019 ) . By the time the IPTA DR2 GWB search was carried out ( Antoniadis et al., 2022 ) , the NANOGrav 12.5-yr dataset was already used to detect the CRN ( Arzoumanian et al., 2020a ) . Thus, the CRN could theoretically have been measured 3 years in advance of Arzoumanian et al. (2020a) if IPTA DR2 was constructed immediately. Given the long timescales required for new GW signals to emerge in PTA datasets, this motivates the need to either improve the speed of data combination or explore alternative methods for analyzing joint-PTA datasets, supplementing the eventual results of a fully-combined dataset. To address this, we introduce a novel, resource-efficient approach we call the “Lite” method. Instead