ESPPU INPUT: C 3 within the "Linear Collider Vision" †

Contact Persons · 2025

Read ESPPU INPUT: C 3 within the "Linear Collider Vision" † by Contact Persons (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-20829.txt.

Introduction

A large team of accelerator experts lays out a plan for a cold copper linear collider. The input dates to 2025. The plan sits inside a broad vision for a shared linear collider site. Such a site would run from Higgs studies up to much higher energy with paired beams.

The team gives base settings for a Higgs plant using this cold copper approach. In the planned tunnel, the same approach could reach much higher energy. The input shares fresh results, near-term plans, and gaps that need more work. The cold copper method uses spread coupling to reach steep energy gains per length.

Catalog record

CREATORContact Persons
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE28 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-20829

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

ESPPU INPUT: C 3 within the "Linear Collider Vision" † Contact Persons Abstract The Linear Collider Vision calls for a Linear Collider Facility with a physics reach from a Higgs Factory to the TeV-scale with e + ​ e − e^{+}e^{-} collisions. One of the technologies under consideration for the accelerator is a cold-copper distributed-coupling linac capable of achieving high gradient. This technology is being pursued by the C 3 collaboration to understand its applicability to future colliders and broader scientific applications. In this input we share the baseline parameters for a C 3 Higgs-factory and the energy reach of up to 3 TeV in the 33 km tunnel foreseen under the Linear Collider Vision. Recent results, near-term plans and future R&D needs are highlighted. 1 Overview C 3 is a concept for a linear collider based on compact, high-gradient, normal-conducting, distributed-coupling accelerators that are operated at cryogenic temperature. [ 1 , 2 , 3 , 4 , 5 ] C 3 is designed and optimized with a holistic approach to the main linacs, collider subsystems, and beam dynamics to deliver the required luminosity at the overall lowest cost. C 3 was optimized at 250 and 550 GeV center of mass to allow for a Higgs physics program that could also perform measurements of the Higgs self-coupling. A total facility length of 8 km is sufficient for operation at 250 and 550 GeV center of mass. The initial operation at 250 GeV can be upgraded to 550 GeV simply with the addition of rf power sources to the main linacs. This is possible because the increase in gradient and resulting increased power requirement is balanced with an adjustment to the beam format to maintain constant beam-loading, or fraction of the rf power delivered to the beam, which preserves the rf efficiency of the system. By optimizing the cavity geometry, rf distribution, and operating at liquid nitrogen temperatures where the conductivity of copper is increased significantly, the peak-power requirement from the high-power rf sources is significantly reduced. This allows a high beam loading, nearly 50%, making for a compact and efficient machine. It is important to emphasize that for a normal conducting machine, the cost driver for the main linacs is the rf power, and through the adoption of distributed-coupling and cold-copper technology, peak rf power requirements are reduced by a factor of 6 compared to NLC. Scenario C 3 -250 C 3 -550 C 3 -250 C 3 -550 C 3 -250 C 3 -550 s.u. s.u. high lumi high lumi Luminosity [x10 34 cm -2 s -1 ] 1.3 2.4 1.3 2.4 7.6 4.8 Gradient [MeV/m] 70 120 70 120 70 120 Effective Gradient [MeV/m] 63 108 63 108 63 108 Num. Bunches per Train 133 75 266 150 532 300 Train Rep. Rate [Hz] 120 120 60 60 120 60 Bunch Spacing [ns] 5.26 3.5 2.65 1.75 2.65 1.75 Single Beam Power [MW] 2 2.45 2 2.45 8 4.9 Site Power [MW] \sim 150 \sim 175 \sim 110 \sim 125 \sim 180 \sim 180 Parameter Set [ 6 ] PS1 PS2 PS1 PS2 PS2 PS2 Table 1.1 : Parameter table for C 3 comparing the original, sustainability update (s.u.) and high luminosity (high lumi) options. Bunch charge and crossing angle are constant at 1 nC and 14 mrad. Site length of 8 km with details of layout shown in Fig. 1.1 . The current optimized parameters for C 3 are listed in Table 1.1 with the layout shown in Fig. 1.1 . The central injector complex, located in the proximity of the interaction point (IP), consists of both the polarized electron source linac and the electron-driven positron source. The positron beam and the electron beam are accelerated in a common linac to 3 GeV. At 3 GeV the positron beam is then injected into a pre-damping ring. The 3 GeV electron beam bypasses the pre-damping ring. After pre-damping the positrons, the electron and positron beams are accelerated in a common linac to the injection energy of the damping rings at 4.6 GeV. The beams are then separated and transported to the opposite ends of the accelerator complex. At the opposite ends of the accelerator complex, the positron and electron beams are injected into their respective damping rings. Figure 1.1 : Major features for the C 3 accelerator complex to scale. The damping rings are positioned to allow for a straight path after extraction into the beginning of the linacs to eliminate beam turn-arounds for the damped beams which could degrade the emittance. Upon exiting the damping rings, the beams are transported through the bunch compressors, main linacs and beam delivery systems (BDS) to the IP with a 14 mrad crossing angle. The main linac and BDS are sized for 550 GeV CoM. C 3 was optimized based on the incredible advances that were made as part of the ILC and CLIC programs in the development of electron and positron sources, injector linacs, damping rings, bunch compressors, beam transport, beam dynamics, beam delivery and detectors. These highly complex and optimized systems serve as the baseline for what is technologically achievable in the linear collider complex and allow for the optimization of the main linac using the C 3 approach with minor modifications to the other sub-systems. 2 Physics performance The beam parameter optimization for C 3 at center-of-mass energies of 250 GeV and 550 GeV was conducted as detailed in [ 7 ] . The primary background from beam-beam interactions that we consider at C 3 is the "incoherent" production, i.e. interactions off of resolved photons rather than fields, of electron-positron pairs. The study is based on GuineaPig++ [ 8 ] simulations of the beam-induced backgrounds and optimize the instantaneous luminosity. The revised parameter set, referred to as Parameter Set 2 (PS2), achieves a \sim 40\% increase in total luminosity compared to the baseline Parameter Set 1 (PS1), while ensuring that bremsstrahlung-induced backgrounds remain at acceptable levels. These are reported in Table 2.1 . Table 2.1 : Baseline (PS1) and optimized (PS2) luminosity parameter sets for C3. Parameter C 3 -250(PS1) C 3 -250(PS2) C 3 -550(PS1) C 3 -550(PS2) Horizontal emittance \epsilon_{x}^{*} [nm] 900 1000 900 1000 Vertical emittance \epsilon_{y}^{*} [nm] 20 12 20 12 Vertical waist shift w_{y} [ \mu m] 0 80 0 80 Geometric luminosity [ 10^{34}\,\text{cm}^{-2}\text{s}^{-1} ] 0.75 0.92 0.93 1.14 Total luminosity [ 10^{34}\,\text{cm}^{-2}\text{s}^{-1} ] 1.35 1.90 1.70 2.40 Average Beamstrahlung parameter \langle\Upsilon\rangle 0.065 0.062 0.21 0.20 A critical part of the optimization involved lowering the vertical emittance and introducing a vertical waist shift ( w_{y} ) of 80 \mu m, enhancing luminosity through better vertical focusing at the IP. Additionally, a moderate increase in the horizontal emittance ( \epsilon^{*}_{x} ) from 900 nm to 1000 nm effectively controlled beam-beam interaction effects, thus maintaining a manageable luminosity spectrum and limiting detector occupancy from background particles. The distributions of incoherently produced e^{+}e^{-} secondary particles are crucial for estimating beam-induced background (BIB), impacting detector design. For ILC, because of the lower repetition rate ( 5 – 10\ \mathrm{Hz} ), the background particle rates per train are the highest, as discussed in [ 7 ] . Our preliminary studies show that the C 3 beam structure

Read the complete text