The core software and simulation activities for data analysis at the Pierre Auger Observatory

* · 2025

Read The core software and simulation activities for data analysis at the Pierre Auger Observatory by * (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-20650.txt.

Introduction

Eva Santos describes the core software behind the Pierre Auger Observatory in a 2025 paper. The observatory in Argentina is the largest cosmic ray detector ever built. Its upgraded array mixes water tanks, scintillators, and radio antennas across a vast plain. Fluorescence telescopes watch the sky from four sites.

The Offline Framework runs simulations and data analysis for it all. Detailed detector modeling uses the Geant4 toolkit. The software must handle surface and underground muon detectors alike. Science goals span cosmic ray makeup and rare photons or neutrinos. Shared tools keep a huge collaboration analysis consistent.

Catalog record

CREATOR*
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-20650

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The core software and simulation activities for data analysis at the Pierre Auger Observatory * Abstract The Pierre Auger Observatory, located near the town Malargüe in the province of Mendoza, Argentina, is the largest cosmic-ray detector in existence, covering an area of 3000 km 2 3000\text{\,}{\mathrm{km}}^{2} . The upgraded Observatory, in Phase II of operations, consists of a surface array of 1660 stations combining water Cherenkov, scintillator, and radio detectors. A subset of stations also includes underground muon detectors. Additionally, fluorescence detectors located at four sites overlook the array. The science goals for the enhanced Observatory include the measurement of the properties of ultra-high-energy cosmic rays with large statistics and high sensitivity to the primary composition. The Observatory is also sensitive to photons and neutrinos at the highest energies, allowing it to participate in multi-messenger studies. The Auger Off ¯ \overline{\textrm{Off}} line ¯ \underline{\textrm{line}} Framework provides the tools to perform detailed simulations, using the Geant 4 toolkit, of all components of the Observatory and the analysis of both data and simulated events. It proved to have the flexibility needed to evolve during the lifetime of the Observatory, to accommodate new sub-detectors and, recently, changes to the station readout electronics. A new challenge is interfacing the framework with Machine Learning tools for both the development and execution of neural-network-based algorithms. Independent of the framework, CORSIKA 7 is used to simulate particles, fluorescence light, and radio signals produced by air showers. The production of simulations is coordinated centrally to provide standard libraries for analyses and to optimize the use of computing resources. We will describe the evolution and status of the Off ¯ \overline{\textrm{Off}} line ¯ \underline{\textrm{line}} Framework and the tools used to coordinate the simulation efforts. We will also discuss the challenges of the massive simulation efforts and the resources consumed to provide the simulation libraries required by the Collaboration. [a]Eva Santos 1 Introduction The Auger \overline{\textrm{Off}} \underline{\textrm{line}} Framework [ 1 ] is one of the keystones of the core software used by the Pierre Auger Collaboration. Its origin dates back to 2002, and, already back then, the Auger \overline{\textrm{Off}} \underline{\textrm{line}} was aimed at building software sturdy enough to endure more than 20 years, comprising the whole life of the Pierre Auger Observatory, in which further upgrades would be a reality. The software framework consists of an object-oriented C++-based code designed to be flexible and robust enough to support the simulation and reconstruction of all types of events detected by the Observatory [ 2 ] . It can handle several types of data formats and databases, encompassing event simulation and reconstruction, as well as monitoring information from all the instruments. For the event simulation, the reading of the output files from several extensive air shower Monte Carlo codes, namely CORSIKA [ 3 ] and AIRES [ 4 ] , with the options CoREAS [ 5 ] and ZHAiRES [ 6 ] for the radio component of air showers, and also CONEX [ 7 ] , for fast simulations of the longitudinal development of air showers, is supported. The advent of AugerPrime [ 8 ] , the major upgrade of the Pierre Auger Observatory, was the biggest challenge overcome by the Auger \overline{\textrm{Off}} \underline{\textrm{line}} Framework, as the implementation of some of its components was found to break the original framework philosophy [ 9 ] . Most of the production of the extensive simulation libraries used by a large number of analyses in the Collaboration is done using the grid through the Virtual Organization Auger [ 10 ] . 2 Core software The core software of the Pierre Auger Collaboration consists of a set of programs dedicated to the study of high- and ultra-high-energy cosmic rays. At the head is the Auger \overline{\textrm{Off}} \underline{\textrm{line}} Framework [ 1 ] , a modular and universal software used for the reconstruction and simulation of the events detected by the Pierre Auger Observatory, which we detail below. The remaining core software employed by the Pierre Auger Collaboration consists of the Monte Carlo programs CORSIKA [ 3 ] , AIRES [ 4 ] , and CONEX [ 7 ] , which are used to simulate the development of extensive air showers and whose output files are given as input to the Auger \overline{\textrm{Off}} \underline{\textrm{line}} Framework for the event simulation. Other programs used are CRPropa [ 11 ] and SimProp [ 12 ] , aimed to simulate the propagation of cosmic rays in an extragalactic environment. 2.1 Auger \overline{\textrm{Off}} \underline{\textrm{line}} Framework The Auger \overline{\textrm{Off}} \underline{\textrm{line}} is a universal framework for the reconstruction and simulation of events detected at the Pierre Auger Observatory. It is an object-oriented C++ code with a modular structure aimed at being flexible and robust software, allowing it to be easily extensible to accommodate upgrades to the Pierre Auger Observatory instrumentation throughout its entire lifetime. It was also meant to be a collaborative effort of a large number of physicists developing a variety of applications regarding the reconstruction and simulation of all types of events detected at the Pierre Auger Observatory. For this purpose, the parts of the code directly used by physicists should be clear and relatively straightforward to modify. 2.1.1 The upgraded framework The initial design of the Pierre Auger Observatory envisaged a hybrid detection technique comprising a 3000\text{\,}{\mathrm{km}}^{2} surface detector array (SD), composed of 1600 water-Cherenkov detectors (WCD) arranged in a triangular grid of 1500\text{\,}\mathrm{m} spacing (SD-1500), observed by the fluorescence detector (FD), consisting of 24 telescopes placed in four locations on the SD periphery. The first enhancement to the Pierre Auger Observatory targeted an extension to lower energies by deploying 61 additional WCDs in a 23.5\text{\,}{\mathrm{km}}^{2} denser array of 750\text{\,}\mathrm{m} spacing (SD-750) and HEAT - High Elevation Auger Telescopes , three fluorescence telescopes at the Coihueco site, extending the FD elevation range from 30^{\circ} to 58^{\circ} . The Auger Engineering Radio Array (AERA) was later added to the SD array, serving as proof of concept of the feasibility of the future radio detector (RD) of AugerPrime, which incorporates a short aperiodic loaded loop antenna (SALLA) from the RD, and the surface scintillator detector (SSD) atop most WCD. Moreover, the dynamic range of the SD was extended by the installation of a small photomultiplier tube inside each station, and a new electronics board with faster sampling connecting all the detectors was added. Finally, the underground muon detector (UMD), an array of 30\text{\,}{\mathrm{m}}^{2} area scintillator detectors buried at a depth of 2.3\text{\,}\mathrm{m} at the SD-750 and the newer SD-433 array, in the vicinity of a WCD, aimed at the direct measurement of the muon content of air showers [ 13 , 14 ] was deployed. While some changes were straightforward to implement, the implementation of AERA required significant additions to the software [ 15 ] . Also, some of the AugerPrime components posed challenges to the framework as it meant breaking with some old paradigms of the Auger \overline{\textrm{Off}} \underline{\textrm{line}} , called for some unexpected changes, and an update from C++ 98/03 to C++ 11/14 to break strict backward compatibility, eliminate deprecated interfaces, and modernize the development infrastructure [ 9 , 10 ] . Currently, the Auger \overline{\textrm{Off}} \underline{\textrm{line}} can be used to reconstruct events taken during the old (Phase I) and the AugerPrime

Read the complete text