Comparative Analysis of Clustering Methods for Power Delay Profile in MMW Bands and In-Vehicle Scenarios
Radek Zavorka 1 , Ales Prokes 1 , Josef Vychodil 1 , Tomas Mikulasek 1 , Petr Horky 1 ,Christoph Mecklenbräuker 2 , Aniruddha Chandra 3 , Jan Marcin Kelner 4 , Cezary Henryk Ziółkowski 4 · 2025
Read Comparative Analysis of Clustering Methods for Power Delay Profile in MMW Bands and In-Vehicle Scenarios by Radek Zavorka 1 , Ales Prokes 1 , Josef Vychodil 1 , Tomas Mikulasek 1 , Petr Horky 1 ,Christoph Mecklenbräuker 2 , Aniruddha Chandra 3 , Jan Marcin Kelner 4 , Cezary Henryk Ziółkowski 4 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-20358.txt.
Introduction
Radek Zavorka and co-authors compare ways to cluster radio echoes inside a car cabin at millimeter waves, in a paper from two thousand twenty-five. Cabin links face safety stakes and car-to-car talks. A known echo model with fading clusters fits the cabin too.
Measured echo profiles from inside a car fed the race. A sparse reweighted method ran against the classic k-means split. The work sets up which tool reads cabin echoes best. Trusty links start with knowing where echoes bunch. Readers in car radio get a methods check for a tight, metal room on wheels.
Catalog record
| CREATOR | Radek Zavorka 1 , Ales Prokes 1 , Josef Vychodil 1 , Tomas Mikulasek 1 , Petr Horky 1 ,Christoph Mecklenbräuker 2 , Aniruddha Chandra 3 , Jan Marcin Kelner 4 , Cezary Henryk Ziółkowski 4 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 18 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-20358
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Comparative Analysis of Clustering Methods for Power Delay Profile in MMW Bands and In-Vehicle Scenarios Radek Zavorka 1 , Ales Prokes 1 , Josef Vychodil 1 , Tomas Mikulasek 1 , Petr Horky 1 ,Christoph Mecklenbräuker 2 , Aniruddha Chandra 3 , Jan Marcin Kelner 4 , Cezary Henryk Ziółkowski 4 Abstract The spatial statistics of radio wave propagation in specific environments and scenarios, as well as being able to recognize important signal components, are prerequisites for dependable connectivity. There are several reasons why in-vehicle communication is unique, including safety considerations and vehicle-to-vehicle/infrastructure communication. The paper examines the characteristics of clustering power delay profiles to investigate in-vehicle communication. It has been demonstrated that the Saleh-Valenzuela channel model can also be adapted for in-vehicle communication, and that the signal is received in clusters with exponential decay. A measurement campaign was conducted, capturing the power delay profile inside the vehicle cabin, and the reweighted ℓ 1 \ell_{1} minimization method was compared with the traditional k-means clustering techniques. e-mail: [email protected] I Introduction Channel modeling is a significant part of almost all communication systems. We need to understand how the signal propagates from point A to point B in a certain environment if reliable communication is required or new standards or frequency bands should be implemented [ 1 ] . A prominent stochastic model for indoor multipath propagation is the Saleh-Valenzuela (SV) model [ 2 ] . According to the SV model, the tap gain coefficients of the channel impulse response (CIR) between transmitter (TX) and receiver (RX) and also in individual clusters have exponential decrease. A ragged environment, propagation losses, and reflection potentially causes clusters of multi path components (MPC) from the received signal. The model was proposed for the indoor environment of mid-size rooms [ 3 ] , but we show that the model is applicable to in-vehicle communication. Given that modern car wire harnesses often weigh more than several tens of kilograms [ 4 ] , millimeter-wave (MMW) communication can also be used as a wireless bus to support non-critical safety functions. It is essential to systematically analyze the spatial signal distribution inside the passenger cabin in various conditions to ensure dependable connectivity. In [ 5 ] , researchers focused on examining and comparing delay spread and path loss at UWB 3–11 GHz and MMW 55–65 GHz. In the work [ 6 ] , the in-vehicular wireless 60 GHz channel for the aircraft cabin is described. The measurement campaign outlined in the paper [ 7 ] was used to analyze the effects of driving-related vibrations and twisting on CIR and delay-Doppler spread (DDS) inside the car cabin. Data clustering proves invaluable in the identification of outliers and determination of signal components, particularly within complex datasets. A wide array of methods, ranging from straightforward to highly intricate, have been harnessed for this purpose. Among these, the unsupervised k-means algorithm has gained notable popularity [ 8 , 9 ] . Nevertheless, a critical aspect is specifying the optimal number of clusters that the algorithm should delineate. An intriguing alternative lies in the Sparsity-based clustering technique, which adeptly segregates the Power Delay Profile (PDP) into clusters without necessitating a predetermined cluster count. Detailed discussions of this method can be found in the works [ 10 , 11 ] , grounded in the principles of reweighted \ell_{1} minimization. I-A Contribution of the Paper This paper is focused on analyzing clustering methods for measured millimeter waves in the delay domain in frequency band 55-65 GHz and intra-vehicle scenario. The benefits of paper can be divided into following areas: • comparison of k-means method and Sparsity based clustering based on reweighted \ell_{1} minimization • analyzing of PDP for in-vehicular communication from measurement campaign by the above mentioned algorithms • validation of the SV model for and intra-vehicle communication at MMW band The paper is organized as follows: The standard SV channel model is presented in section II . The following sections go through clustering techniques, ranging from basic k-means in section V to more intricate Sparsity based clustering- Reweighted \ell_{1} minimization in section VI . Section VII of the paper regarding experimental measurement provides details on the measurement setup and the application of the aforementioned clustering algorithms to the observed data. Conclusion section sums up the paper. II Saleh-Valenzuela model Channel models for indoor communication consist of a large number of multipath components caused by reflections, scattering, and diffraction. Given below is the general, complex, low-pass channel impulse response: h(\tau)=\sum_{n=1}^{N}\beta_{n}\exp(j\phi_{n})\delta(\tau-\tau_{n}), (1) where \beta_{n} and \phi_{n} are the amplitude gain and phase of the n th path, respectively. N is the total number of propagation paths. \tau_{n} is the propagation delay (arrival time) of the n th path. \delta (.) is the Dirac delta function. [ 10 , 2 , 12 ] CIR according to SV model [ 2 ] describing indoor channel is expressed by h(\tau)=\sum_{l=0}^{\infty}\sum_{k=0}^{\infty}\beta_{kl}\exp(j\theta_{kl})\delta(t-T_{l}-\tau_{kl}), (2) where \beta_{kl} and \theta_{kl} are the amplitude gain and phase of the k th path within the l th cluster, respectively. T_{l} is delay of l th cluster arrival. \tau_{kl} is the excess arrival delay of the k th path within the l th cluster. [ 2 ] The most popular approach based on paper [ 2 ] assumes a monotonically decreasing received power with the function of T_{t} and \tau_{kl} and average power of \beta_{kl} is described by equation \overline{\beta_{kl}^{2}}=\overline{\beta_{0,0}^{2}}\exp(-\frac{T_{l}}{\Gamma})\exp(-\frac{\tau_{kl}}{\gamma}), (3) where \overline{\beta_{0,0}^{2}} is the average power gain of the first path of the first cluster, and \Gamma and \gamma are power-delay time constants for the clusters and the paths, respectively [ 2 ] . The Figs. 1 and 2 represent the described model. Fig. 1: SV channel model - Exponentially decaying ray and cluster average powers [ 2 ] Fig. 2: SV channel model - A realization of the impulse response [ 2 ] III Channel description In-vehicle radio channel measurements are typically assumed to exhibit time-invariant characteristics. So, in order to properly define the radio channel, the CTF is as follows: H(k)=s_{21}(k), (4) where k is the measurement index that can be linked to a specific frequency. We transform the CTF into a CIR using an inverse Fourier transform in accordance with: h(n)=\sum_{k=0}^{N-1}H(k)\mathrm{e}^{jkn2\pi/N,} (5) where, in the delay domain, n denotes a discrete time. The PDP is then determined as the average of a several realizations in accordance with: P(n)=\mathsf{E}\{|h(n)|^{2}\}. (6) IV Methods of radio signal clustering In order to cluster radio signals, a variety of methods are available. From fundamental machine learning techniques like k-means [ 13 ] and enhanced k-PowerMeans [ 14 ] up to sparsity-based techniques derived from reweighted \ell_{1} minimization [ 10 , 11 ] . Synthetic signals were generated in MATLAB for validating the clustering approaches. Figure 3 shows an exemplary realization of a synthetic signal. There is a transmit signal and received signal that have been impacted by noise, and a signal that has been reconstructed via reweighted \ell_{1} minimization (explained below). Fig. 3: Synthetic signal for verification of clustering algorithms V K-means clustering algorithm Most likely one of the most well-known unsupervised clustering algorithms, applied in many fields [ 8 , 13 ] . The number of expected clusters must be specified for proper working. The basic idea behind the