Impact of the Pilot Design for OFDM Based Bi-static Integrated Sensing and Communication System
Cuneyd Ozturk Member, IEEE, Cagri Goken Member, IEEE · 2025
Read Impact of the Pilot Design for OFDM Based Bi-static Integrated Sensing and Communication System by Cuneyd Ozturk Member, IEEE, Cagri Goken Member, IEEE (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-20288.txt.
Introduction
Cuneyd Ozturk and Cagri Goken study how pilot signals should be placed in a radio system that both talks and senses. The setup uses OFDM signals at millimeter waves, with a sender and a separate receiver. Pilots are known signals that help the receiver read the channel. Their 2025 paper works out best-case error bounds for range and speed of a single target.
The math gives closed forms for those bounds under any pilot layout. A clear trade shows up. Placing pilots more often in time sharpens the range read. Packing them more tightly in frequency sharpens the speed read. A plain least squares method tracks the bounds well when noise is low. The results guide layout choices for joint sensing and communication gear.
Catalog record
| CREATOR | Cuneyd Ozturk Member, IEEE, Cagri Goken Member, IEEE |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-20288
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Impact of the Pilot Design for OFDM Based Bi-static Integrated Sensing and Communication System Cuneyd Ozturk Member, IEEE, Cagri Goken Member, IEEE Abstract A bistatic millimeter-wave (mmWave) ISAC system utilizing OFDM signaling is considered. For a single-target scenario, closed-form expressions for the Cramer-Rao bounds (CRBs) of range and velocity estimation are derived for a given pilot pattern. The analysis shows that when the target’s range and velocity remain within the maximum unambiguous limits, allocating pilot symbols more frequently in time improves position estimation, while increasing their density in frequency enhances velocity estimation. Numerical results further validate that the least squares (LS) channel estimation approach closely follows CRB predictions, particularly in the high-SNR regime. I Introduction Recent studies highlight the significant potential of OFDM-based ISAC systems [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 ] . Several of these works [ 1 , 2 , 3 , 4 , 5 , 6 ] focus on the monostatic configuration, where the transmitter and receiver are co-located, which requires full-duplex capability. In contrast, others [ 7 , 8 , 9 , 10 ] explore the bi-static scenario, where the transmitter and receiver are separate, thereby eliminating self-interference concerns. Typically, the transmitter designates part of its resources to pilot symbols in communication systems for channel estimation. For ISAC systems, pilot symbols can further be utilized for sensing purposes. The sensing receiver leverages these symbols to estimate the channel between the target and receiver in the monostatic scenario, and the combined channels from the transmitter to the target and from the target to the receiver in the bistatic scenario. The remaining resources, apart from the pilot symbols, are the data symbols and assigned for communication, creating a fundamental trade-off between sensing and communication due to the allocation of pilot symbols. In the bi-static configuration, the sensing receiver can utilize the entire OFDM frame with decoding the data symbols before estimating the associated channel coefficients, which adds complexity and poses an additional challenge, particularly when the communication and radar receivers are separate. Alternatively, relying solely on pilot symbols reduces processing gain, it simplifies the receiver design. Since an equally spaced pilot signal limits the maximum unambiguous range and velocity, an alternative pilot design scheme is proposed using coprime and periodic stepping values for pilot indices in [ 11 ] . It is demonstrated that the proposed pilot design does not reduce maximum unambiguous range and velocity. In [ 12 ] , pilot design is studied for the monostatic configuration, where the user serves as both a downlink communication device and a sensing target. Cramer-Rao Bounds (CRBs) for velocity and range estimation of the target are derived, and the objective is to minimize their weighted sum while satisfying a communication rate constraint. In this work, we investigate the impact of the pilot symbol design on a bistatic milimeter wave (mmWave) ISAC utilizing OFDM. We assume that bi-static radar processing is conducted only by using the pilot symbols, instead of the whole OFDM frame. We explore the fundamental limits of parameter estimation by deriving the CRBs for range and velocity estimation under a given pilot pattern design. By analyzing the influence of pilot placement and system parameters on estimation accuracy, our findings contribute to the optimal pilot design of ISAC waveforms for improved sensing performance. Furthermore, numerical results confirm that when 2D-FFT approach is applied to least square (LS) channel estimates, the range and velocity estimation errors closely follow CRB trends, particularly in the high-SNR regime. II System Model II-A Geometry Fig. 1: Considered bi-static ISAC system geometry illustrating the distances d_{\mathrm{tx}},d_{\mathrm{rx}},D , the bi-static angle \beta , the angle between the target direction and the bisector of the bi-static angle \delta , and AoA \theta . We examine a bi-static ISAC system that employs an OFDM waveform and operates at millimeter-wave frequencies. The system setup includes a transmitter, a single target, a receiver, and user equipment (UE). In particular, the receiver aims to estimate the position of the target based on the signals reflected by the target. As illustrated in Fig. 1 , we define d_{\mathrm{tx}} , d_{\mathrm{rx}} , and D as the distance between the transmitter and the target, the distance between the target and the receiver, and the distance between the transmitter and the receiver, respectively. The transmitter and receiver are stationary, and the receiver knows the distance to the transmitter. The angle at the target subtended by the transmitter and the receiver, denoted as \beta (bi-static angle), is given by \beta=\cos^{-1}\left((d_{\mathrm{tx}}^{2}+d_{\mathrm{rx}}^{2}-D^{2})/(2d_{\mathrm{tx}}d_{\mathrm{rx}})\right) . In addition, we define \delta as the angle between the direction of the target’s velocity vector and the bi-static bisector. Furthermore, \theta is defined as the angle-of-arrival (AoA) at the receiver. By following the notation given by [ 8 ] , we define d_{\mathrm{bis}}\triangleq d_{\mathrm{tx}}+d_{\mathrm{rx}} as the bi-static range. The relationship between d_{\mathrm{bis}} and d_{\mathrm{rx}} can be given as d_{\mathrm{rx}}=(d_{\mathrm{bis}}^{2}-D^{2})/\left(2(d_{\mathrm{bis}}-D\cos\theta)\right) Therefore, if D and \theta are known at the receiver, d_{\mathrm{rx}} can be easily estimated once d_{\mathrm{bis}} is estimated. The sensing receiver can scan the environment using analog beamforming to estimate the AoA by employing a constant false alarm rate (CFAR) detector. In this study, we assume that the AoA is obtained at the sensing receiver. Therefore, the sensing receiver aligns its beam center accordingly. Consequently, throughout this manuscript, the receiver focuses on estimating the target’s range and velocity. Additionally, the transmitter directs its beam toward the communication receiver. II-B Signal Model N and M denote the number of OFDM subcarriers and the number of OFDM symbols in a communication frame , respectively. \Delta f denotes the subcarrier spacing, and T_{\mathrm{s}} is the OFDM symbol duration including the cyclic prefix (CP). In particular, T_{\mathrm{s}}=T+T_{\mathrm{cp}} , where T=1/\Delta f and T_{\mathrm{cp}} is the duration of the CP. II-B 1 Modulation Symbols We assume that a single data stream is transmitted and we define X_{n,m} as the modulation symbol corresponding to the n -th subcarrier and m -th OFDM symbol. Throughout this manuscript, for any (n,m) we assume X_{n,m} is QPSK symbols i.e., \big|X_{n,m}\big|=1 . We assume some of these modulation symbols are pilot symbols and known at the receiver. In particular, we denote the set of pilot symbols as \mathcal{P}\triangleq\{(n,m)\mid X_{n,m}~\text{is a pilot symbol}\} . We define 0\leq\rho\leq 1 as the ratio of the sources allocated to the pilot symbols, i.e., \rho=\big|\mathcal{P}\big|/(NM), where \big|\cdot\big| denotes the number of elements of its argument. II-B 2 Sensing Channel The transmitter and receiver each have a single radio frequency (RF) chain , hence analog beamforming is utilized at both the transmitter and receiver 1 1 1 Fully digital beamforming requires a separate RF chain for each antenna element, making it impractical at mmWave frequencies due to high costs and significant power consumption [ 13 ] . . Let N_{T} and N_{R} represent the number of antennas at the transmitter and receiver, respectively. We also assume that the line-of-sight (LoS) path between the transmitter and the receiver is blocked, and only the reflected path from the target is considered 2 2 2 If a LoS path is present, the sensing receiver can estimate the target’s range by synchronizing to the LoS path, as considered in