Energy shortcut of N N -level quantum protocols by optimal control

C. L. Latune, M. B. Puthuveedu Shebeek, D. Sugny, S. Guérin · 2025

Read Energy shortcut of N N -level quantum protocols by optimal control by C. L. Latune, M. B. Puthuveedu Shebeek, D. Sugny, S. Guérin (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-20130.txt.

Introduction

Latune and co-authors design quantum controls that reach a target change at the lowest possible energy cost, in work from twenty twenty-five. Shortcut methods force quantum states along a chosen path quickly. Those shortcuts can waste energy compared with what is truly needed. Their method, QOSTE, keeps the same end change at minimal energy. Geometry and optimal control tools derive the controls for any level count.

Minimal cost equals a geodesic length in a rotating frame picture. For long control times, savings over standard shortcuts grow steeply. Classic test protocols for two and three level systems benchmark the method. Energy falls drastically against standard shortcut controls in both tests. Gradient tuning adds robustness while keeping the energy edge intact. A trade-off between toughness and cost is mapped for designers.

Catalog record

CREATORC. L. Latune, M. B. Puthuveedu Shebeek, D. Sugny, S. Guérin
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE53 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-20130

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Energy shortcut of N N -level quantum protocols by optimal control C. L. Latune, M. B. Puthuveedu Shebeek, D. Sugny, S. Guérin Abstract We introduce an energetically-optimal method inspired from Shortcut-To-Adiabaticity (STA) processes, named Quantum-Optimal-Shortcut-To-Energetics (QOSTE). QOSTE produces the same transformation as STA for a given protocol used in quantum technologies or thermodynamics, but at the lowest possible energy cost. In the general case of a N N - level quantum system, we derive the QOSTE controls using geometrical and optimal control tools, and show that the minimal energy cost is determined by the length of the geodesic in the rotating frame given by the original protocol. For long control times, the scaling of the ratio between the two energy costs of STA and QOSTE is quadratic in time. We benchmark our results with the Landau-Zener protocol for qubits and STIRAP for three-level systems. We observe a drastic reduction in energy with respect to standard STA methods. Finally, using gradient-based optimization algorithms and highlighting the emerging trade-off between robustness and energy cost, we design robust QOSTE outperforming STA both in robustness and energy efficiency. Introduction . Control of quantum systems is at the core of quantum applications and quantum technologies [ 1 , 2 , 3 , 4 , 5 , 6 ] . A particularly well-known and effective method for designing the controls is the Shortcut-To-Adiabaticity approach (STA) [ 7 , 8 , 9 , 10 ] . STA is a generic term for various techniques that aim to ensure that the quantum system of interest follows an adiabatic trajectory at an arbitrary speed, obtained for instance by adding counterdiabatic (CD-STA) drivings to the system Hamiltonian. Such techniques, which were first introduced in [ 11 ] , later in [ 12 , 13 , 14 , 15 , 16 ] and then in a quantum thermodynamic context [ 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 ] to avoid quantum friction [ 25 , 26 , 27 ] , have gained much importance in adiabatic quantum computing [ 28 ] , experimental state engineering [ 29 ] , and quantum information processing [ 30 ] , to name a few. STA techniques do not offer a definitive answer for accelerating the dynamics since they require an ansatz typically based on physical considerations. On the other hand, optimal control theory (OCT) is a general mathematical procedure whose goal is to find time-dependent control parameters while minimizing or maximizing a functional that can be the control time-length like in the quantum Brachistochrone problems [ 31 , 32 ] , or the control energy [ 33 , 34 , 2 , 35 , 36 ] . The main result of the present Letter is the derivation by OCT of a method, which we name Quantum Optimal Shortcut-To-Energetics (QOSTE), realizing the same transformations as CD-STA, but where the additional drive is determined from the minimization of its energy cost for a given duration. QOSTE targets a shortcut trajectory of minimum energy while CD-STA focuses on the preservation of an adiabatic trajectory. Additionally, we address robustness issue of QOSTE against variations in Hamiltonian parameters [ 37 , 38 , 39 , 40 ] . It is well known that adiabatic passages feature intrinsic properties of robustness [ 41 ] . However the energy consumed by CD-STA does not contribute a priori to preserve this robustness. By combining gradient-based optimization algorithms with physical constraints, we design robust QOSTE that are optimized for robustness and energy costs simultaneously; they are shown to outperform CD-STA. In the following, we consider a Hamiltonian transformation defined by an initial and a final Hamiltonian, denoted by H_{i} and H_{f} , respectively, and a given protocol H_{0}(t) from H_{0}(0)=H_{i} to H(t_{f})=H_{f} . Adiabatic trajectories are defined from the instantaneous eigenstates of H_{0}(t) [ 42 ] . The protocol H_{0}(t) may be motivated by some thermodynamic protocols such as quantum Otto [ 17 , 43 , 44 , 22 ] or Carnot cycles [ 22 , 23 ] , or by other requirements in quantum annealing processes, qubits resets, or even in adiabatic Grover search algorithm [ 45 ] . The two main motivations for following adiabatic trajectories are robustness against experimental uncertainties [ 41 ] and evading unwanted energy transitions (also referred to as quantum friction in the context of quantum thermodynamics [ 25 , 26 , 27 ] ). However, following adiabatic trajectories requires slowing down the system evolution [ 46 , 47 ] , which is not desirable for quantum technologies. CD-STA (as other STA techniques) offers an alernative. CD-STA is based on the ansatz of preserving the adiabatic trajectories defined by H_{0}(t) , at the cost of an additional counter-diabatic drive V_{\text{CD}}(t) [ 12 , 13 , 14 , 15 ] . It can be expressed (in units with \hbar=1 ) as V_{\text{CD}}(t)=i\sum_{n}\big[|\dot{n}(t)\rangle\langle n(t)|-\langle n(t)|\dot{n}(t)\rangle|n(t)\rangle\langle n(t)|\big] , where |n(t)\rangle denotes the instantaneous eigenstates of the Hamiltonian H_{0}(t) of eigenenergies E_{n}(t) , H_{0}(t)=\sum_{n}E_{n}(t)|n(t)\rangle\langle n(t)| . The effect of V_{\text{CD}}(t) is actually to cancel the transitions between the energy levels of H_{0}(t) . However, the additional drive V_{\text{CD}}(t) comes with an additional energy cost [ 48 , 49 ] associated to quantum speed limit [ 50 ] , power needed to generate controls [ 51 , 52 , 53 ] , increased work fluctuation [ 54 , 55 ] , or classical entropy production due to control signal generation [ 56 ] . CD driving process suffers from high energy expenditure since it imposes the dynamics to follow the adiabatic trajectory at all times . This strong constraint is a priori unnecessary since only the initial and the final states of the protocol matter to achieve the desired transformation. The question of energy efficiency in quantum control [ 57 ] is indeed becoming increasingly important given the intense debate surrounding the energy costs of quantum technologies [ 58 , 59 ] . Energetics . The energy cost of a control V(t) can be estimated as [ 56 ] {\cal C}[V]=\int_{0}^{t_{f}}du||V(u)||^{2}, (1) where ||V||:=\sqrt{{\rm Tr}[V^{\dagger}V]} stands for the Frobenius norm of the CD (QOSTE) driving, V=V_{\text{CD}} ( V=V_{\text{QOSTE}} denoted in the following as V_{Q} ). This energy cost relates to the power consumed by the device control which is expected to represent a significant portion of the overall energy bill for quantum technology operations [ 59 ] , and is therefore usually much higher than the cost of the Hamiltonian transformation, which occurs at the quantum level. Furthermore, applying unnecessarily high energy control to the quantum system can generate extra dissipation and heating, leading to additional energy costs for cooling the experimental setup [ 59 ] . In the general case of a N - level quantum system, we show below that the associated counterdiabatic drive V_{\textrm{CD}}(t) implies an energy cost for a unitary transformation that is lower bounded by \frac{1}{t_{f}}L_{0,t_{f}}^{2}[\tilde{U}_{\textrm{CD}}] , where t_{f} is the time length of the operation and L_{0,t_{f}}[\tilde{U}_{\textrm{CD}}]=\int_{0}^{t_{f}}\sqrt{\textrm{Tr}[\dot{\tilde{U}}_{\text{CD}}^{\dagger}\dot{\tilde{U}}_{\text{CD}}]} is the length of the adiabatic path in the rotating picture with respect to H_{0}(t) . We use here the evolution operators \tilde{U}_{\text{CD}}(t):=U_{0}^{\dagger}(t_{f})U_{\text{CD}}(t_{f}) , with U_{\text{CD}}(t_{f}):={\cal T}e^{-i\int_{0}^{t_{f}}du[H_{0}(u)+V_{\text{CD}}(u)]} and U_{0}(t_{f}):={\cal T}e^{-i\int_{0}^{t_{f}}duH_{0}(u)} , {\cal T} denoting the time-ordering operator. The length L_{0,t_{f}}[\tilde{U}_{\textrm{CD}}] of

Read the complete text