Three-dimensional variational data assimilation of separated flows using time-averaged experimental data
Uttam Cadambi Padmanaban, Bharathram Ganapathisubramani, Sean Symon · 2025
Read Three-dimensional variational data assimilation of separated flows using time-averaged experimental data by Uttam Cadambi Padmanaban, Bharathram Ganapathisubramani, Sean Symon (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-19689.txt.
Introduction
Uttam Cadambi Padmanaban, Bharathram Ganapathisubramani, and Sean Symon blend lab data into flow models in two thousand twenty-five. Their case is flow that splits from a wing at a steep angle. They use flat plane data from a particle image method. The aim is to fix a known turbulence model with real data.
Their new frame adds three dimensional rules to the blend. A force term in the flow equations soaks up the mismatch. Flat blends force that term to cover both model flaws and data flaws. The full frame splits those two sources apart. It gave a better match for pressure, lift, and shear stress in the test case.
Catalog record
| CREATOR | Uttam Cadambi Padmanaban, Bharathram Ganapathisubramani, Sean Symon |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 82 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-19689
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Three-dimensional variational data assimilation of separated flows using time-averaged experimental data Uttam Cadambi Padmanaban, Bharathram Ganapathisubramani, Sean Symon Abstract We present a novel framework for assimilating planar PIV experimental data using a variational approach to enhance the predictions of the Spalart–Allmaras RANS turbulence model. Our method applies three-dimensional constraints to the assimilation of mean velocity data, incorporating a corrective forcing term in the momentum equations. The advantages of this approach are highlighted through a direct comparison with traditional two-dimensional assimilation using the same experimental dataset. We demonstrate its efficacy by assimilating the deep stall flow over a NACA0012 airfoil at a 15 ∘ 15^{\circ} angle of attack and a chord-based Reynolds number of R e c ≈ 7.5 × 10 4 Re_{c}\approx 7.5\times 10^{4} . We find that in two-dimensional assimilation, the corrective forcing term compensates not only for physical modeling errors but also for the lack of divergence in the experimental data. This conflation makes it difficult to isolate the effects of measurement inconsistencies from deficiencies in the turbulence model. In contrast, three-dimensional assimilation allows the corrective forcing term to primarily address experimental setup errors while enabling the turbulence model to more accurately capture the flow physics. We establish the superiority of three-dimensional assimilation by demonstrating improved agreement in reconstructed quantities, including pressure, lift force, and Reynolds shear stress. Preprint: APS/123-QED I Introduction Data assimilation (DA) first emerged in meteorology [ 1 ] , where it was used to improve weather predictions by incorporating observational data into numerical models. DA helps reduce observational noise and uncertainties, expand the field of view of available data, and refine modeling assumptions by calibrating model coefficients and boundary conditions. These advantages have led to its increasing use in fluid mechanics, particularly for studying turbulent flows, as demonstrated by recent studies [ 2 , 3 , 4 , 5 , 6 ] . The complexity of turbulence arises from its wide range of length and time scales and its inherently unsteady behavior. Resolving all these scales using direct numerical simulations (DNS) or large eddy simulations (LES) is computationally intractable for high Reynolds number flows of practical interest [ 7 ] . A more computationally efficient alternative is the use of Reynolds-Averaged Navier–Stokes (RANS) turbulence models, which rely on modeling assumptions to predict an averaged flow state. However, their accuracy is questionable in cases involving strong pressure gradients and flow separation, as they are typically calibrated against only a limited set of canonical flow problems. The application of DA to fluid mechanics problems is particularly useful in improving RANS turbulence models that are able to capture the effects of turbulence a lot more accurately. The widespread adoption of DA in fluid mechanics has also been driven by advances in field imaging techniques, such as planar particle image velocimetry (PIV), which provides access to two-component mean velocity data [ 8 ] . PIV is often used as an alternative to DNS or LES, particularly for studying high Reynolds number flows of practical interest. However, like any experimental method, PIV is subject to noise and uncertainty. It also comes with additional limitations, including low resolution, a limited field of view, high setup costs (especially due to the laser), large data storage requirements, and long processing times. An important problem that is always overlooked is the lack of the third (out-of-plane) component of velocity which is not imaged using planar PIV, and is non-negligible for separated flows even at low Reynolds number [ 9 , 10 ] . Assimilating two-component mean velocity data from planar PIV without enforcing three-dimensional (3D) constraints leads to an inaccurate representation of the flow dynamics, as the planar PIV data do not satisfy the 2D continuity equation since the actual flow is three-dimensional. Among the different types of DA, we use the variational method applied to steady-state cases in this study. Variational DA optimizes a control variable of choice by minimizing the discrepancy between a model output (such as RANS) and reference data (either from experiments or high fidelity simulation). Gradient-based optimization methods are used to minimize the objective function that quantitatively describes the deviation of model output from reference data. The time-averaged continuity and momentum equations are typically applied as constraints. Adjoint methods are used as an efficient way of computing gradients [ 11 , 12 ] . The application of 3D DA has been limited due to a variety of reasons. Reference [ 2 ] performed variational DA of a flow past a circular cylinder at Re=150 using two-component, mean velocity fields from DNS as reference data. A forcing term in the time-averaged momentum equations was optimized without the application of a turbulence model. The two-dimensional (2D) continuity equation was enforced as a constraint, which is consistent with the 2D nature of the flow [ 9 ] . The use of experimental data using a similar methodology for assimilating a higher Reynolds number ( Re_{c}=13,500 ) flow past an idealized airfoil was demonstrated by Ref. [ 13 ] . The justification for enforcing 2D continuity was offered by comparing the optimized forcing with the forcing obtained from the experiment. A good agreement between the two was used to argue that the field was indeed two-dimensional. Reference [ 4 ] extended the work of Ref. [ 2 ] by including the Spalart-Allmaras (SA) turbulence model for assimilating the mean velocity field into the RANS equations. This improved the efficiency of the assimilation for high Reynolds number flows as the baseline solution was already a close approximation of the reference mean velocity field. The authors optimized a control variable in the time-averaged momentum equations (similar to Refs. [ 2 , 13 ] ) of a flow past a backward-facing step (BFS) at Reynolds number Re=28275 using DNS reference data. The study utilized a span-averaged and time-averaged velocity field permitting the enforcement of 2D continuity. Additionally, the reference data were obtained from a strictly divergence-free space of mean velocity fields. This meant that the obtained forcing field was only compensating for the lack of physics that the turbulence model was unable to capture and not any deficiency in the quality of reference data. Recently, Ref. [ 6 ] used a corrective source term in the turbulence transport equation of the SA model for mean velocity assimilation of a flow past a NACA0012 airfoil. The near-stall flow was at an angle of attack \alpha=10^{\circ} and in the Reynolds number range 4.3\times 10^{4}\leq Re\leq 6.4\times 10^{4} . The reference mean velocity field was obtained from time-averaged PIV. DA was able to fill in the gaps that resulted from shadows and reflections during the data acquisition stage of PIV. The effects of three-dimensionality on reconstructed flow quantities such as Reynolds stresses, nonetheless, were not investigated. The studies discussed so far made use of the continuous adjoint approach, which involves linearizing the PDE followed by its discretization. This way, the primal solver used to solve the Navier-Stokes (NS) equations can be re-used for solving the adjoint equations. The discrete adjoint approach, as demonstrated by Ref. [ 12 ] constructs the adjoint equations following its discretization, driving the accuracy of gradient calculation to machine precision. References [ 14 , 15 ] used a discrete adjoint approach with reference