femtoPro: Real-time linear and nonlinear optics simulations

Tobias Brixner, 1,* Stefan Mueller, 1 Andreas Müller, 2 and Sebastian von Mammen 2 · 2025

Read femtoPro: Real-time linear and nonlinear optics simulations by Tobias Brixner, 1,* Stefan Mueller, 1 Andreas Müller, 2 and Sebastian von Mammen 2 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-19627.txt.

Introduction

Tobias Brixner, Stefan Mueller, Andreas Müller, and Sebastian von Mammen build software that simulates laser optics in real time. Their paper appeared in two thousand twenty-five. Useful simulators must refresh faster than the eye can follow. Delays between tweaking a knob and seeing results break the feel. Full physics is too slow, so smart simplifications rule. Their femtoPro system targets femtosecond pulse experiments.

Fast phase swings from the carrier and from travel are separated out. Gaussian beam spreading is handled with explicit formulas. Multi-pulse interference gets visibility and overlap factors. Nonlinear signal beams receive simple radius and curvature rules. The balance keeps essential physics at interactive speed. Teaching and lab planning both gain a live sandbox.

Catalog record

CREATORTobias Brixner, 1,* Stefan Mueller, 1 Andreas Müller, 2 and Sebastian von Mammen 2
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE38 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-19627

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

femtoPro: Real-time linear and nonlinear optics simulations Tobias Brixner, 1,* Stefan Mueller, 1 Andreas Müller, 2 and Sebastian von Mammen 2 Abstract Real-time optics and spectroscopy simulations ideally provide results at update rates of 120 Hz or more without any noticeable delay between changing input parameters and the calculated results. Such calculations require models of sufficient speed yet adequate level of detail in the physical approximations to contain the essential features of the simulated phenomena. We discuss a representation of femtosecond laser pulses in which fast phase oscillations due to carrier frequency and due to spatial propagation are separated out and amplitude modulations due to Gaussian beam propagation are also separated and treated explicitly. We derive simplified expressions for the spatial modulations of laser beams. Further, we derive visibility and beam-overlap factors describing multi-pulse interference. We obtain simplified expressions for radius and curvature of nonlinear signal beams in the case of fundamental beams with different convergence, different beam waist, and imperfect mutual overlap. The described model is implemented in the virtual-reality laser laboratory simulation “femtoPro,” but the derived equations can be used independently for other applications. Journal: josab Publication type: Research Article 1 Introduction Computer simulations of optical phenomena and light–matter interaction are ubiquitous across the scientific disciplines because light fields are elementary probes of nature. In particular in the natural sciences, lasers are used as tools in the realms of frequency-resolved or time-resolved spectroscopy and microscopy applications. The particular optical setups of such techniques may require complex and precise configurations. Planning experiments and analyzing experimental data is hence generally carried out with the help of appropriate computer simulation techniques. For example, optical systems are designed using geometrical ray tracing [ 1 , 2 ] . If more precision is required, finite-difference methods are employed for numerical approximations of wave optics [ 3 , 4 , 5 , 6 , 7 , 8 ] . Similarly, the simulation of light–matter interactions can be performed at various levels of accuracy and computational cost, including light-induced quantum dynamics [ 9 , 10 , 11 , 12 , 13 ] . While it is generally desirable to implement procedures and algorithms as efficiently as possible for a given approach, the absolute computation time for nonlinear spectroscopy simulations is typically not the main priority because it is not critical whether results are obtained after a few seconds, minutes, or hours if the desired accuracy is reached in the end. Real-time calculations are not required under such normal-use circumstances. We have recently introduced an immersive virtual-reality (VR) simulator of an ultrafast laser laboratory (“femtoPro”) [ 14 , 15 ] . It can be used to provide practical training to students or researchers and allows them to obtain practical expertise in the fundamentals of optics, basic alignment procedures, all the way up to building and using advanced time-resolved spectroscopy setups. For this purpose, real-time simulations are required of linear and nonlinear optical phenomena. In this context, “real time” does not signify the native femtosecond timescale of the photoinduced dynamics, but it means that the total calculation time for a complete spectroscopy experiment should be on the order of 8\,\mathrm{ms} on a typical VR headset such that frame update rates of 120\,\mathrm{Hz} can be reached. Such rates reduce motion blur [ 16 ] and motion sickness [ 17 ] , improving user comfort. In other words, the goal is that the user does not notice a timing difference between carrying out any linear or nonlinear optical experiment in a real laboratory (with appropriate data acquisition software) or simulating the same setup in femtoPro. While our motivation for the present work thus stems from implementing this VR simulator, the derived equations are much more general and are applicable in other optics simulation scenarios, outside of a VR context, particularly if fast computation is desired. Thus, the purpose of the present paper is two-fold: 1) to explain the assumptions underlying the femtoPro software such that users may understand its features and limitations, and 2) to introduce and discuss physical models that can be employed for fast optics simulations on any platform and for various purposes. The requirement for a lag-free user experience sets a top priority on the speed of the simulations. This is different from the established simulation tools and protocols listed above. Still, the accuracy needs to be sufficient to provide a realistic simulation of the spatial and temporal propagation of ultrafast laser pulses and their interaction with matter. Some requirements are therefore: We desire to take into account Gaussian beam propagation because finite-focus-size effects are relevant to simulate beam overlap alignment procedures; laser beams may be clipped if they hit the edge of an optical element or an iris; femtosecond pulses are modified by dispersion upon propagation through materials and upon resonant interactions; and second-order processes shall be included to simulate frequency conversion, all in real time as defined above. The underlying simulation concepts are in principle known from the vast existing scientific literature, in particular from textbooks on general optics [ 18 , 19 , 20 , 21 , 22 , 23 ] and ultrafast spectroscopy [ 24 , 25 , 26 , 27 , 28 , 29 , 30 , 31 , 32 ] . However, the real-time simulation requirement necessitates a careful balance between speed and accuracy. In another manuscript, we describe the concept, implementation, and evaluation of a dynamic graph-based algorithm that is used to find a self-consistent solution of multiple propagating and interfering laser beams [ 33 ] . The dynamic graph model maps the formal network between beam segments of laser pulses propagating freely in space as “edges,” and optical elements (such as mirrors or lenses) that modify the laser pulse properties as “nodes,” and then the algorithm is set up to minimize the number of evaluation steps. In the present work, we focus on the physical model underlying the individual calculation steps of that algorithm and derive simplified mathematical expressions that facilitate real-time optics simulations. We start by defining our representation of the electric fields of laser pulses including the spatial modulations of laser beams resulting from geometric effects of optical elements (Section 2 ). Then we discuss multi-beam interference (Section 3 ), followed by spatial and spectral–temporal modulations arising from linear and nonlinear light–matter interaction (Section 4 ) and the graphical representation of laser beams (Section 5 ). Exemplary simulation results are shown in Section 6 before we conclude in Section 7 . 2 Laser pulse propagation We define and derive all relevant expressions for the description of laser pulses in great detail in Section of Supplementary Information (SI) and only quote the main results here. Indeed, we highly recommend reading the entire Section of the SI before continuing with the main article here because all the relevant quantities and essential transformations are set up in the SI. As a result of the derivations, we find that the electric field of a laser pulse at position \mathbf{r} as a function of spatial coordinates x , y and z and of time t is given by E_{\text{prop}}^{+}(x,y,z,t)=\sqrt{\frac{2}{\pi}}\frac{1}{w(z)}\exp\left[-\frac{(x-x_{0})^{2}+(y-y_{0})^{2}}{w^{2}(z)}\right]e^{i\mathbf{k}\cdot\mathbf{r}}\sqrt{\frac{S}{\delta t}}\tilde{E}_{t}(j)e^{-i\omega_{0}(t-T)} (1) according to Eq. ( ) in the SI, where the “ + ” superscript in E_{\rm{prop}}^{+} indicates that this is

Read the complete text