Design of an aluminum nitride based electro-optic phase modulator and photonic switch for next generation scalable photonic integrated circuits
Suat Icli, Rangana Banerjee Chaudhuri, Elena Jordan, Fatemeh Salahshoori, Tanja E. Mehlstäubler · 2025
Read Design of an aluminum nitride based electro-optic phase modulator and photonic switch for next generation scalable photonic integrated circuits by Suat Icli, Rangana Banerjee Chaudhuri, Elena Jordan, Fatemeh Salahshoori, Tanja E. Mehlstäubler (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-18861.txt.
Introduction
Suat Icli and co-authors design in 2025 light switches carved from aluminum nitride, sized for the ultraviolet beams that trapped ion quantum computers use. Electro-optic modulators steer laser light in atomic physics, and scaling ion traps demands those steerers be printed on chips, not bolted on benches. The team's devices work at the violet wavelength ytterbium ions answer to.
Computer simulations tuned the waveguide's light confinement, the radio frequency match, and the modulation strength. The phase modulator came out serviceable but power hungry. The switch, built with push pull electrodes that drive two arms in opposite senses, reached the needed effect at far lower voltage effort, the design's clear winner. The authors present aluminum nitride as a credible platform for ultraviolet photonic circuits. Chip scale light control of this kind is a prerequisite for ion trap machines that grow from one device to many.
Catalog record
| CREATOR | Suat Icli, Rangana Banerjee Chaudhuri, Elena Jordan, Fatemeh Salahshoori, Tanja E. Mehlstäubler |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 14 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-18861
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Design of an aluminum nitride based electro-optic phase modulator and photonic switch for next generation scalable photonic integrated circuits Suat Icli, Rangana Banerjee Chaudhuri, Elena Jordan, Fatemeh Salahshoori, Tanja E. Mehlstäubler Abstract Electro-optic modulators are fundamental components in atomic physics experiments, including trapped-ion systems used in precision metrology and quantum computing. To enable scalable photonic integration, we design and analyze an integrated photonic electro-optic phase modulator and switch at 411 nm for ytterbium (Yb + ) ions using aluminum nitride (AlN) waveguides. We employ finite element method (FEM) simulations to optimize optical confinement, RF impedance matching, and electro-optic modulation efficiency. The phase modulator achieves a DC V π L V_{\pi}L of 178 V cm for TE polarization. The photonic switch, designed with a push-pull electrode configuration, demonstrates a V π L V_{\pi}L of 24 V cm, enabling efficient operation at lower voltages. These results highlight AlN as a candidate for ultraviolet photonic integrated circuits, facilitating high-speed optical modulation for trapped-ion applications. a]Physikalisch-Technische Bundesanstalt, D-38116 Braunschweig, Germany b]Institut für Quantenoptik, Leibniz Universität Hannover, D-30167 Hannover, Germany c]Laboratorium für Nano- und Quantenengineering, Leibniz Universität Hannover, Schneiderberg 39, 30167 Hannover, Germany keywords Photonic integrated circuits, UV photonics, electro-optic phase modulator, aluminium nitride, Mach-Zehnder interferometer, photonic switch † † authorinfo: *[email protected] 1 INTRODUCTION Modulators play a crucial role in atomic, molecular and optical physics experiments [ 1 ] . Among these, trapped-ion systems are a prominent example, where the function of modulators vary from laser stabilization to more advanced operations such as qubit manipulation [ 2 ] or individual addressing of ions [ 3 ] . A popular ion species is Yb + ions, which are employed in both optical clocks [ 4 ] and quantum computing [ 5 ] . The typical wavelengths in these experiments range from ultraviolet (UV) to infrared (IR), with required modulator frequencies spanning from hundreds of MHz to GHz [ 6 ] . To increase the scalability of such systems by replacing free-space or fiber optics with photonic integrated circuits (PICs), AlN is a promising material. In addition to its compatibility with CMOS fabrication techniques, its Pockels and piezoelectric effects, combined with a large transparency window covering wavelengths from UV to IR, make it an important candidate for realizing both active and passive devices that operate at different wavelengths and perform various functions on the same chip [ 7 ] . Previously, AlN electro-optic modulators [ 8 ] were demonstrated for telecom wavelengths. Their bandwidths were limited due to resonant devices used. In this work, we propose to design and demonstrate wide-bandwidth electro-optic devices (phase modulator and photonic switch in particular) at wavelengths close to UV, with the potential to function at bandwidths of tens of GHz. In this work, we design and analyze an integrated photonic electro-optic phase modulator and switch at 411 nm for 171 Yb + ions. Using finite element method (FEM) simulations, we optimize field distributions, impedance matching, and modulation efficiency to enable scalable photonic integration for trapped-ion applications. Section 2 provides an overview of the relevant equations, materials, and simulation methods used for both devices, while Sec. 3 presents the simulation results and the estimated device performance followed by the conclusion in Sec. 4 2 Design and Simulation For c-axis grown AlN, the relevant electro-optic coefficients are r_{13} , r_{33} , and r_{51} . While r_{13} and r_{33} are approximately 1 pm/V, r_{51} is reported to be smaller [ 8 ] . The refractive index change induced by the applied electric field for TE polarization ( n_{x} ) and TM polarization ( n_{z} ) is given by Eq. ( 1 ), where the E_{z} is the electric field component along the z-axis. \begin{split}&n_{x}=n_{x}-\frac{1}{2}n_{x}^{3}r_{13}E_{z}\\ &n_{z}=n_{z}-\frac{1}{2}n_{z}^{3}r_{33}E_{z}\end{split} (1) For efficient modulation, the applied electric field must be maximized within the waveguide. One approach is using electrodes positioned above and below the waveguide to generate a strong vertical field, but this configuration presents fabrication challenges due to complex multilayer processing. Instead, a coplanar ground-signal-ground (GSG) electrode configuration is employed, where the signal electrode is placed directly on top of the waveguide and is flanked by two ground electrodes. This setup provides a balance between maximizing E_{z} and fabrication feasibility. The designed devices consist of gold electrodes, AlN waveguides with SiO 2 cladding, and a silicon substrate. The cross-section of the waveguide is shown in the inset of Fig. 1 a, while the gold electrodes are shown in Fig. 1 b. (a) (b) Figure 1: (a) Simulated optical mode field with the inset showing the device cross-section. (b) Electric and magnetic field distribution at 40 GHz, where arrows represent normalized field directions: white arrows indicate magnetic fields, and black arrows indicate electric fields. The inset shows the top view of device. 2.1 Optical Simulations To optimize the optical design, Ansys Lumerical MODE ® is used. For the optimization, we compute the optical mode properties, including the fundamental mode profile, effective index, and electrode induced losses. The optical simulations focus on maximizing light confinement within the waveguide while minimizing absorption losses from metal electrodes. A key design parameter is the spacing between the waveguide and the electrodes, as reducing this distance enhances electro-optic interaction but can lead to increased optical losses. The optimal spacing is chosen to balance these competing factors. 2.2 Electrical Simulations The electrostatic and RF field distributions are modeled using COMSOL Multiphysics ® . Electrostatic simulations evaluate the impact of electrode placement, dielectric properties, and applied voltage on the electric field distribution. The RF simulations analyze key parameters such as characteristic impedance, propagation constant, and scattering parameters (S-parameters) to ensure efficient RF power transfer. Achieving proper impedance matching is crucial to minimize signal reflections and maximize modulation efficiency. A target impedance of 50 \Omega is chosen to align with standard RF driving circuits. The simulated S-parameters provide insight into the reflection and transmission characteristics of the electrodes, ensuring that the modulator can operate effectively across a wide frequency range. 2.3 System-level Integration To integrate optical and electrical simulation results, Ansys Lumerical INTERCONNECT ® is used for system-level modeling. This tool incorporates the optical and electrical simulation results into a circuit-level model, allowing the evaluation of device performance under realistic operating conditions. The modulated optical spectrum is obtained to study the frequency-dependent modulation response, accounting for impedance mismatch, velocity mismatch, and RF loss. 3 Results and discussion Figure 1 a shows the simulated optical mode profile of the fundamental TE mode at 411 nm, which has a group index of 2.6. The inset shows the materials composing the waveguide region. Additionally, the distance between the signal electrode and the waveguide is optimized to balance multiple factors: minimizing optical losses due to metal absorption, enhancing the E_{z} field intensity, and maintaining a practical fabrication process. This design approach offers a good compromise between device performance and ease of fabrication. 3.1 Phase Modulator The phase modulator consists of an AlN waveguide and GSG electrodes with a length of 5 mm. To achieve efficient and wide-bandwidth modulation of optical signals, several key criteria must be fulfilled: ensuring impedance matching between the source, transmission line, and load (typically 50 \Omega ), minimizing RF propagation loss, and maintaining velocity matching between the optical and RF fields. (a) (b) (c) Figure