Vehicle to Vehicle Path Loss Modeling at Millimeter Wave Band for Crossing Cars

Anirban Ghosh ID, Aniruddha Chandra ID, Tomas Mikulasek ID, Ales Prokes ID · 2025

Read Vehicle to Vehicle Path Loss Modeling at Millimeter Wave Band for Crossing Cars by Anirban Ghosh ID, Aniruddha Chandra ID, Tomas Mikulasek ID, Ales Prokes ID (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-18798.txt.

Introduction

Anirban Ghosh, Aniruddha Chandra, Tomas Mikulasek, and Ales Prokes lead a team on this paper from two thousand twenty-five, whose text adds Wojtun, Kelner, and Ziolkowski. It models signal loss between two cars that cross on a road, at millimeter wave bands.

Fifth generation radio now lets cars talk car to car, and millimeter waves suit fast, low-delay safety calls such as crash warnings. The team measured the loss as two cars near from opposed lanes and pass, at a set high band. Their fit beats past loss models and holds for both the approach and the parting legs. The work rests on real road tests, not just theory.

Catalog record

CREATORAnirban Ghosh ID, Aniruddha Chandra ID, Tomas Mikulasek ID, Ales Prokes ID
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-18798

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Vehicle to Vehicle Path Loss Modeling at Millimeter Wave Band for Crossing Cars Thanks: This work was developed within a framework of the research grants: project no. 23-04304L sponsored by the Czech Science Foundation, MubaMilWave no. 2021/43/I/ST7/03294 funded by National Science Centre, Poland under the OPUS call in the Weave programme, and grant no. UGB/22-863/2023/WAT sponsored by the Military University of Technology. Thanks: A. Ghosh is with ECE Department, SRM University AP, 522240 India. Thanks: A. Chandra is with ECE Department, NIT Durgapur, 713209 WB, India (e-mail: [email protected]). Thanks: T. Mikulasek and A. Prokes are with UREL, BUT, 616 00 Brno, Czechia. Thanks: J. Wojtun, J. M. Kelner and C. Ziolkowski are with ICS, MUT, 00908 Warsaw, Poland. Anirban Ghosh ID, Aniruddha Chandra ID, Tomas Mikulasek ID, Ales Prokes ID Abstract Fifth generation new radio (5G NR) is now offering sidelink capability, which allows direct vehicle-to-vehicle (V2V) communication. Millimeter wave (mmWave) enables low-latency mission-critical V2V communications, such as forward crash warning, between two vehicles crossing on a road without dividers. In this article, we present a measurement-based path loss (PL) model for V2V links operating at 59.6 59.6 GHz mmWave when two vehicles approach from opposite sides and cross each other. Our model outperforms other existing PL models and can reliably model both approaching and departing vehicle scenarios. I Introduction Owing to its wideband low-latency requirements, millimeter-wave (mmWave) based fifth generation (5G) networks will be playing a significant role in vehicle-to-vehicle (V2V) communication [ 1 ] in the coming years. In keeping with the advancement, 3GPP, in its release 16, introduced the standards for 5G New Radio (NR) V2X with sidelink (SL) aspect; where sidelink refers to direct communication between user equipment (UEs) without the data traveling the entire span of the network [ 2 ] . In a V2V scenario, UEs are vehicles, and direct communication between them can ensure a faster exchange of information for vehicle platooning, extended sensor data exchange, advanced driving, remote driving, and intent sharing. For example, the NR cellular-V2X sidelink would improve reliability in autonomous driving through services such as forward crash warning [ 3 ] . When two cars are approaching each other from the opposite direction, there are multiple applications that require data exchange between them. This includes sharing information about the road condition, traffic situation, or diversion, as well as emergency warnings like collision avoidance between approaching vehicles. Communication can start between vehicles moving in opposite directions only when they are within communication range. As the cars are speeding from opposite sides, the relative velocity is additive, and there is a very small window for communication. Thus, we require a high bandwidth link to effectively transfer data between them and take actions as deemed fit. V2V channel sounding campaigns in various scenarios (urban, suburban, parking garage, highway, intersections) were primarily restricted to frequencies below 6 GHz [ 4 , 5 , 6 , 7 , 8 ] . In [ 9 ] the authors performed a measurement campaign using directional antennas both at the transmitter and the receiver, and fixed them at a low elevation position on the car bumpers for V2V communications at 38 GHz and 60 GHz frequency bands. In most practical applications, it makes more sense to place the antennas on the roof of the vehicles to reduce attenuation and path loss (PL). In addition, the measurement was carried out in a convoy configuration. In [ 10 ] , the measurement was carried out at 60 GHz, but here the transmitter and receiver were placed on a fixed tripod emulating a rooftop antenna of a stranded vehicle. Besides, here also the configuration explored was vehicles moving away from one another and not approaching. As an interesting study, it was pointed out in [ 11 ] that PL can be different for varying antenna positions, even at 28 GHz. However, there was no study on the PL model to see if the PL, when cars are approaching, should be different from the case when the vehicles are moving away, and if this changes with relative speeds. Fig. 1: (left) The aerial view of the test site [courtesy: Google Maps], (middle) the 3D site layout and measurement tracks [courtesy: Mapy.cz], and (right) photograph showing the vehicles under test and antenna hardware assembly. Thus to address the aforementioned gap, we performed a measurement campaign at 59.6 GHz in a V2V communication scenario [ 12 , 13 ] . The current paper focuses on the PL values obtained from the field tests; specifically: • Based on real-world data, a PL model is proposed for a typical mmWave band ( 59.6 GHz) V2V link where vehicles approach each other, cross, and move away. • To quantize the goodness of fit of our introduced model we compare it with four other existing PL models in terms of root mean square error (RMSE), Grey relational grade-mean absolute percentage error (GRG-MAPE), and Pearson correlation coefficient-mean absolute percentage error (PCC-MAPE). Our model showed a better fit to experimental data with respect to other standard PL models. • The proposed model is parameterized to best fit the measurement data. The parameterized model confirms our intuition that the same model with a different parameter set is required for defining each scenario (moving in and moving away) at a different relative speed. II Measurement Campaign The transmitter (Tx) of the time-domain channel sounder as described in [ 12 ] , comprises of Anritsu MP1800A signal quality analyzer that supplies the seamlessly repeating Golay complementary sequence at baseband (BB) with a bandwidth of 4 GHz. The BB signal is passed through an optional low pass filter (LPF) to maintain bandwidth integrity before being upconverted into the center frequency of 59.6 GHz using a SiversIma FC1005V/00 V-band up/down converter. To compensate for phase noise, the reference signal for up-conversion is applied from an Agilent E8257B frequency-stable, low-phase noise generator. The output signal from the converter passes through a band pass filter (BPF) for image frequency rejection and a power amplifier (PA) of gain 35 dB to indemnify for propagation loss. The amplified signal is then transmitted using an omnidirectional substrate-integrated waveguide (SIW) antenna. At the receiver (Rx), a similar antenna is used for the reception of the transmitted signal. The received signal initially passed through a low noise amplifier of gain 33 dB for loss compensation before being mixed with the signal from a carrier generator Agilent 83752A inside SiversIma FC1003V/01 V-band up/down converter to obtain the baseband signal [ 12 ] . The obtained baseband signal is stored using Tektronix 72004C ( 20 GHz, 50 GS/s) mixed signal oscilloscope (MSO). Downloading data from the oscilloscope and subsequent basic processing are facilitated by LabView software. The synchronization between the Tx and Rx module is established through back-to-back (B2B) calibration. Post calibration, the synchronization is maintained with the help of rubidium (Rb) oscillators. The transmitted Golay sequence is generated at a data rate of R_{\mathrm{DR}}=12.5 Gbps and contains N=2048 bits, and hence the maximum observable time is T_{\mathrm{max}}=N/R_{\mathrm{DR}}=163.8 ns. With a memory depth of the MSO at M_{\mathrm{D}}=31.25 MSample/channel, the sampling rate at R_{\mathrm{S}}=50 GSample/s, and the sampling interval at T_{\mathrm{int}}=5 ms, the number of samples per channel impulse response (CIR), N_{\mathrm{sam/CIR}}=N\times R_{\mathrm{S}}/R_{\mathrm{DR}}

Read the complete text