Fourier State Tomography of Polarization-Encoded Qubits

Mohammed K. Alqedra, Pierre Brosseau, Ali W. Elshaari, Jun Gao, Anton N. Vetlugin, Cesare Soci, Val Zwiller · 2025

Read Fourier State Tomography of Polarization-Encoded Qubits by Mohammed K. Alqedra, Pierre Brosseau, Ali W. Elshaari, Jun Gao, Anton N. Vetlugin, Cesare Soci, Val Zwiller (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-18311.txt.

Introduction

Mohammed Alqedra and co-authors demonstrate a leaner way to fully characterize light-based quantum bits, in a 2025 paper. Standard tomography, the full readout of a quantum state, grows impractical as qubits multiply, since the measurement count explodes. Their Fourier method instead turns a single rotating waveplate per qubit and reads the state from the pattern that results.

They tested it on faint laser states and on entangled photon pairs from two sources, a quantum dot and a crystal converter, at telecom wavelengths. The rebuilt states matched standard tomography closely, with quality scores agreeing within error bars. Because settings grow only in step with qubit count, the authors offer the method as a practical route for larger photonic systems.

Catalog record

CREATORMohammed K. Alqedra, Pierre Brosseau, Ali W. Elshaari, Jun Gao, Anton N. Vetlugin, Cesare Soci, Val Zwiller
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-18311

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Fourier State Tomography of Polarization-Encoded Qubits Mohammed K. Alqedra, Pierre Brosseau, Ali W. Elshaari, Jun Gao, Anton N. Vetlugin, Cesare Soci, Val Zwiller Abstract Quantum state tomography is a central technique for the characterization and verification of quantum systems. Standard tomography is widely used for low-dimensional systems, but for larger systems, it becomes impractical due to the exponential scaling of experimental complexity with the number of qubits. Here, we present an experimental realization of Fourier-transform quantum state tomography for polarization-encoded photonic states. We validate the technique using weak coherent states and entangled photon pairs generated by a quantum dot and spontaneous parametric down-conversion source in the telecom wavelength. The reconstructed density matrices show excellent agreement with those obtained through conventional projective tomography, with calculated metrics such as fidelity and concurrence matching within error bars, confirming the reliability and accuracy of the technique. Fourier state tomography employs only a single rotating waveplate per qubit, thereby avoiding repeated adjustments across multiple waveplates and ensuring that the number of physical measurement settings scales linearly with the number of qubits, despite the exponential growth of the underlying state space. This reduction in optical configurations simplifies experimental overhead, making Fourier state tomography a practical alternative for multi-qubit characterization. Quantum state tomography (QST) is a cornerstone of quantum information science that enables the complete reconstruction of an unknown quantum state from measured data [ 1 ; 2 ; 3 ] . In photonic quantum systems, QST is particularly important for characterizing polarization-encoded qubits [ 1 ] , which are widely used in quantum communication [ 4 ; 5 ] , cryptography [ 6 ; 7 ; 8 ] , and photonic quantum computing [ 9 ; 10 ] . By measuring a set of complementary observables and applying appropriate reconstruction algorithms [ 11 ] , QST enables a comprehensive understanding of the underlying quantum system. Standard projective tomography utilizes a set of waveplates and polarizers to measure discrete projection bases, with each basis measurement requiring a distinct experimental configuration [ 1 ; 12 ] . Although this approach is practical for low-dimensional systems, such as polarization-entangled photon pairs, the experimental complexity—such as the number of measurements, configurations, and computational processing, grows exponentially with the number of qubits [ 13 ; 14 ] . This exponential scaling presents a fundamental challenge, rendering projective tomography impractical for high-dimensional quantum systems. Incomplete measurement techniques, such as entanglement witnesses [ 15 ; 16 ; 17 ; 18 ; 19 ; 20 ; 21 ; 22 ; 23 ] , have emerged as an alternative approach to gain partial information about higher-dimensional quantum states while avoiding the exponential burden of full state tomography. Nevertheless, entanglement witnesses are typically tailored for specific types of states or entanglement structures. Besides, they do not provide comprehensive information about the quantum state, thereby restricting their general applicability. While other resource-efficient methods, such as compressed sensing [ 13 ; 14 ] , have been proposed, they often require specific assumptions about the state or prior knowledge, limiting their general applicability. Fourier-transform quantum state tomography (FT-QST) has been proposed as a resource-efficient alternative, reducing the number of physical measurement configurations by employing only one single waveplate and polarizer per qubit mode [ 24 ] . Instead of discrete measurements, FT-QST measures a pseudocontinuous, time-dependent signal as each waveplate rotates at a distinct frequency, enabling full state reconstruction via Fourier analysis. Because each qubit needs only a single rotating waveplate, the hardware/configuration overhead scales linearly with the number of qubits, in stark contrast to the exponential number of settings required by standard projective tomography. It should be noted that we still need to collect enough time samples (per Nyquist’s criterion) to capture all frequency components, but this pseudocontinuous scan avoids physically reconfiguring the apparatus in an exponential number of ways. Consequently, FT-QST is particularly advantageous for characterizing multi-qubit systems. Figure 1: (a) Fourier tomography of n -qubit photonic state. For every mode n , a quarter waveplate (QWP) rotating at 5^{n-1}\omega is used. A fixed linear polarizer (LP) is placed in front of every single photon detector (SPD). (b) Simulated probabilities as a function of waveplate rotation angle for one (blue), two (yellow) three (green) and four (red) photons with vertical polarization. In this work, we present the first experimental realization of FT-QST, demonstrating its feasibility for reconstructing quantum states of single- and two-qubit polarization states. The use of superconducting nanowire single-photon detectors (SNSPDs) is an additional advantage, as they offer higher detection efficiency with lower dark counts than semiconductor-based single-photon detectors. We first validate the technique by measuring polarization-filtered weak coherent states produced by a laser attenuated to the single-photon level. Subsequently, we extended the application of FT-QST to measure entangled photon pairs generated by an InAs/GaAs quantum dot in the telecom C-band [ 25 ] . We cross-verify the results with standard projective tomography and observe excellent agreement on key metrics such as fidelity, concurrence, and fine-structure splitting (FSS). We further validate FT-QST using polarization-entangled pairs generated by spontaneous parametric down-conversion (SPDC).Throughout these experiments, we utilized a maximum-likelihood estimation algorithm to ensure the physicality of the reconstructed density matrices from the Fourier analysis of the measured data. Our findings demonstrate the reliability and accuracy of FT-QST for characterizing both single- and multi-qubit polarization states, offering a resource-efficient alternative to conventional methods. The schematic of the setup for performing Fourier state tomography for an n -qubit photonic state \rho is shown in Figure 1 .a. It consists of n modules, each measuring a qubit mode , m , using a rotating quarter waveplate (angular frequency \omega_{m} ), a fixed horizontal polarizer, and a single photon detector. We will briefly summarize the essential theory here, while referring the reader to Ref. [ 24 ] for a more detailed derivation. The measurement probability of detecting photons in the horizontal polarization configuration for each mode, p_{n}(t) , is given by: p_{n}(t)=\frac{1}{2^{n}}\sum_{i_{1},\dots,i_{n}=0}^{3}S_{i_{1},\dots,i_{n}}\prod_{m=1}^{n}\chi_{m,i_{m}}(t), (1) where S_{i_{1},\dots,i_{n}} are the generalized Stokes parameters, and \chi_{m,i_{m}}(t) is a time-dependent function that encodes the effect of the rotating waveplate in mode m for a particular Pauli operator index i_{m} . Due to the oscillatory phase shifts induced by the waveplate rotation, \chi_{m,i}(t) can be written in terms of sines and cosines at integer multiples of \omega_{m} . Consequently, the product \prod_{m=1}^{n}\chi_{m,i_{m}}(t) can be expressed as a finite sum of sines and cosines at the combined frequencies of \{\omega_{1}\dots\omega_{m}\} . Consequently, p_{n}(t) takes a Fourier-series expansion of the form: p_{n}(t)=a_{0}+\sum_{f\in\mathcal{F}}\left[a_{f}\cos(\Omega_f t)+b_{f}\sin(\Omega_f t)\right], (2) where \mathcal{F} is the set of all relevant frequency components arising from combinations of {\omega_{1},\dots,\omega_{n}} . \Omega_{f} represents a specific linear combination of the fundamental rotation frequencies. a_{f} and b_{f} are Fourier coefficients, which can be expressed as linear combinations of the Stokes parameters S_{i_{1},\dots,i_{n}} . For the explicit form of \chi_{m,i}(t) , see Ref. [ 24 ] . In the supplementary material, we present the special cases for a single- and two- qubit modes. Here, we choose an integer ratio of 5 between successive waveplate rotation frequencies, as it cleanly eliminates degeneracies among the measured harmonic components and thereby enables unambiguous extraction of all generalized Stokes parameters [ 24 ] . Smaller integer ratios either produce overlapping harmonics or fail to generate enough

Read the complete text