Superconducting properties of commercially available solders for low-field applications Journal: Cryogenics
C. Hickman, K. K. H. Leung, A. H. Al-Tawhid, B. W. Filippone, P. R. Huffman, E. Korobkina, D. P. Kumah, C. M. Swank · 2025
Read Superconducting properties of commercially available solders for low-field applications Journal: Cryogenics by C. Hickman, K. K. H. Leung, A. H. Al-Tawhid, B. W. Filippone, P. R. Huffman, E. Korobkina, D. P. Kumah, C. M. Swank (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-17345.txt.
Introduction
Hickman and co-authors measure how common shop solders behave as superconductors at very low temperatures and weak magnetic fields. Such solders serve in current leads and in joints for precision experiments run near absolute zero. Wrong values for their switch points can spoil a design, so the team tested five store-bought alloys directly.
Each solder's resistance was tracked down to 2.3 kelvin and in fields up to 0.1 tesla, and the team extracted the temperature and field at which each stops superconducting. A half-tin, half-lead solder performed best, staying superconducting near 7 kelvin even at the top field. Some values are reported for the first time, and one widely used value for a silver-bearing solder proved wrong in their tests. The work appeared in 2025, with the journal Cryogenics named in the catalog record.
Catalog record
| CREATOR | C. Hickman, K. K. H. Leung, A. H. Al-Tawhid, B. W. Filippone, P. R. Huffman, E. Korobkina, D. P. Kumah, C. M. Swank |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 20 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-17345
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Superconducting properties of commercially available solders for low-field applications Journal: Cryogenics C. Hickman, K. K. H. Leung, A. H. Al-Tawhid, B. W. Filippone, P. R. Huffman, E. Korobkina, D. P. Kumah, C. M. Swank Abstract Solders with superconducting properties around 4 K 4\,{\rm K} are useful in low magnetic field environments for AC current leads or in electrical and mechanical bonds. Accurate knowledge of these properties are needed in high precision experiments. We have measured the electrical resistance of five commercially-available solders: 50%Sn-50%Pb, 60%Sn-40%Pb, 60%Sn-40%Pb-0.3%Sb, 52%In-48%Sn, and 96.5%Sn-3.5%Ag, down to 2.3 K 2.3\,{\rm K} and in applied magnetic fields from 0 to 0.1 T \,{\rm T} . Their critical temperatures T c T_{c} and critical fields B c B_{c} were extracted in our analysis, taking into account the observed 90%-to-10% transition widths. Our best candidate for low-loss AC current leads in low fields is 50%Sn-50%Pb, which had zero-field T c , 0 = ( 7.1 ± 0.3 ) K T_{c,0}=(7.1\pm 0.3)\,{\rm K} , and remained high to T c ( B = 0.1 T ) = ( 6.9 ± 0.3 ) K T_{c}(B=0.1\,{\rm T})=(6.9\pm 0.3)\,{\rm K} . We report T c T_{c} and B c B_{c} of 60%Sn-40%Pb-0.3%Sb and B c , 0 B_{c,0} of 96.5%Sn-3.5%Ag for the first time. Our T c , 0 = ( 3.31 ± 0.04 ) K T_{c,0}=(3.31\pm 0.04)\,{\rm K} for 96.5%Sn-3.5%Ag disagrees with a widely adopted value. PACS 84.71.Mn , 84.71.Ba , 74.25.fc , 74.25.Sv , 74.25.Op , 88.80.hm , 74.62.Bf , 74.25.-q , 84.71.Fk , 1 Introduction Many solders – especially those with major Sn, Pb, Bi, or In components – have superconducting transitions around or above normal boiling liquid helium temperatures. Solders with superconducting properties can be used for electrical-current transport in cryogenic environments where loss and heat avoidance is of importance. For AC current, solders may prove more desirable than "hard" superconducting wires (often Nb-based superconducting filaments embedded in a normal-conducting matrix) that have losses due to coupling and eddy current effects [ 1 , 2 , 3 , 4 ] . In sensitive, low-temperature, weak magnetic field applications, such as in SQUID-based NMR [ 5 , 6 ] and quantum computing [ 7 , 8 ] , unaccounted for superconducting transitions can lead to spurious effects and degradation of performance due to changes in thermal conductivity or distortion of magnetic fields. The superconducting solder wires we studied consist of eutectic mixtures of type-I superconductors. They are easy to obtain and can be implemented as current leads. Our particular application is for a dilution-refrigerator-based nuclear physics experiment that will search for a time-reversal-symmetry-violating neutron electric dipole moment (nEDM) using novel NMR techniques on polarized free neutrons and 3 He [ 9 , 10 , 11 , 12 ] . For our \sim 1\,{\rm\mu T} static field, the volume-averaged gradient specification is <50\,{\rm pT\,cm^{-1}} over a \sim 1\,{\rm m^{3}} volume. For spin dressing [ 13 ] , we also require a \sim 1\,{\rm kHz} AC field with \sim 0.1\,{\rm mT} amplitude. The designed \cos(\theta) AC magnets needed to achieve the desired field uniformity require a \sim 6-10\,{\rm A} current (amplitude). Due to engineering constraints, we are not able to submerge our magnet wiring in liquid helium. For maintaining below T_{c} during operation, one system [ 9 ] will use exchange gas cooling with surfaces cooled by a helium circulation system; in another system [ 14 ] will rely on conductive cooling with a 4.2\,{\rm K} helium bath. For our AC magnet wiring candidates, we chose solders made from an eutectic mixture of type-I superconductors [ 15 , 16 ] that can be manufactured as a single, relatively large (0.5-1.0 \,{\rm mm} ) diameter superconducting filament. This avoids the need for a normal-conducting matrix, and the only AC-related heating is a frequency-independent hysteretic loss [ 17 ] . We also want a high T_{c} in our magnetic field range of interest of \lesssim 50\,{\rm mT} . Our baseline candidate was pure 100% Pb, which has T_{c,0}=7.2\,{\rm K} and B_{c,0}=0.08\,{\rm T} [ 18 ] . We use T_{c,0} and B_{c,0} to denote T_{c}(B=0) and B_{c}(T=0) , respectively. The electric transport properties of four commercially available solders with T_{c,0}\gtrsim 5.5\,{\rm K} were measured. Due to our interest in low fields, we did not exceed 100\,{\rm mT} applied field. We also incorporated the 90%-to-10% resistance transition width in our analysis and propagated the impact of this on our extracted parameters. This is important for the detailed deployment of these materials. For the most promising material for our AC field coil wiring, 50%Sn-50%Pb, which maintains a relatively high T_{c} , we describe a technique to apply a cryogenically robust electrical insulation to the solder wire. Many of the solders we characterized, such as the Sn-Pb solders, are widely used in cryostat construction [ 19 , 20 , 21 ] . The Sb-doped Pb-Sn solder has been recommended because the Sb content helps to inhibit embrittlement and cracking from cryogenic thermal cycling [ 19 ] . And the silver-bearing tin solder, 96.5%Sn-3.5%Ag, is recommended for use in “most mechanical joints” [ 19 ] due to its balance between mechanical strength and low melting temperature ( 221\,{\rm{}^{\circ}C} ). We observe disagreements between our results and the references for 50%Sn-50%Pb, 52%In-48%Sn, and 96.5%Sn-3.5%Ag. And we are the first to report on the T_{c} and B_{c} of 60%Sn-40%Pb-0.3%Sb and B_{c,0} of 96.5%Sn-3.5%Ag. 2 Methods 2.1 Wire Specifications The 50%Sn-50%Pb solder wire has a diameter of 0.81 \,{\rm mm} and is from Prince & Izant Co. Inc. The 60%Sn-40%Pb wire used is a generic solder with a \sim 1.6\,{\rm mm} diameter. The 60%Sn-40%Pb-0.35%Sb is a 0.5 \,{\rm mm} diameter rosin core wire solder from Micro-Measurements (MMF006619-ND). The 52%In-48%Sn is a 0.8 \,{\rm mm} diameter solder from Chip Quik Inc. (SMDIN52SN48). The 96.5%Sn-3.5%Ag solder is from Harris® (Stay Brite SB31) with 1.6 \,{\rm mm} diameter, which has a specified melting temperature of 221 ∘ C. 2.2 Experimental Setup Our experiments were carried out inside a Quantum Design Physical Property Measurement System ® 1 1 1 From the Department of Materials Science and Engineering, NC State University , which can provide fields up to 9 T and a temperature range of 1.9 - 350 K. We used a standard 4-probe configuration to measure the DC resistance of the samples. A Keithley 6221 Ultra-sensitive Current Source, providing a 100 \,{\rm mA} amplitude and 5 \,{\rm Hz} square wave current, was used with a Keithley 2182A nanovoltmeter. This combination has a specified resistance measurement range of 10\,{\rm n\Omega} to 200\,{\rm M\Omega} . Due to our interest in higher temperatures and low fields, we did not exceed 0.1 \,{\rm T} or cool below 2.3 \,{\rm K} . The specified temperature stability and accuracy are \pm 0.2\% and \pm 1\% , respectively, and the specified field uniformity is \pm 0.01\% over the 5.5 \,{\rm cm} diameter region of the sample puck. The magnetic field was applied perpendicular to the current direction. Our solder samples were melted and deposited on a single-crystal sapphire substrate (see Figure 1 ). Four aluminum wires were bonded to the sapphire and gold electrical contact pads of the measurement puck’s printed circuit board. The typical resistances measured