The Timepix4 Beam Telescope

K. Akiba, J. Alozy, D. Bacher, R. Ballabriga Sune, F. de Benedetti, M. van Beuzekom, V. van Beveren, T. Bischoff, H. Boterenbrood, W. Byczynski, M. Campbell, E. Chatzianagnostou, V. Coco, P. Collins, E. Dall’Occo, R. Dumps, F. de Benedetti, T. Evans, A. Fernández Prieto, M. Fransen, A. Gallas Torrei · 2025

Read The Timepix4 Beam Telescope by K. Akiba, J. Alozy, D. Bacher, R. Ballabriga Sune, F. de Benedetti, M. van Beuzekom, V. van Beveren, T. Bischoff, H. Boterenbrood, W. Byczynski, M. Campbell, E. Chatzianagnostou, V. Coco, P. Collins, E. Dall’Occo, R. Dumps, F. de Benedetti, T. Evans, A. Fernández Prieto, M. Fransen, A. Gallas Torrei (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-15207.txt.

Introduction

Akiba and a large team of colleagues described the Timepix4 beam telescope in twenty twenty-five. A beam telescope is a reference instrument: detector prototypes are placed inside it at test beams, and its precise tracking measures how well they perform. This one uses planar silicon sensors bonded to Timepix4 readout chips.

At a CERN test beam of high-energy hadrons, the telescope located particle tracks to about two point three micrometers in each direction at its center. Combining timestamps from its planes timed tracks to about ninety-two picoseconds. The paper details the hardware, the data acquisition system, the dedicated software, and the corrections applied to raw measurements. The authors present the instrument as a precise testbed for developing future particle detectors.

Catalog record

CREATORK. Akiba, J. Alozy, D. Bacher, R. Ballabriga Sune, F. de Benedetti, M. van Beuzekom, V. van Beveren, T. Bischoff, H. Boterenbrood, W. Byczynski, M. Campbell, E. Chatzianagnostou, V. Coco, P. Collins, E. Dall’Occo, R. Dumps, F. de Benedetti, T. Evans, A. Fernández Prieto, M. Fransen, A. Gallas Torrei
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE46 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-15207

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The Timepix4 Beam Telescope K. Akiba, J. Alozy, D. Bacher, R. Ballabriga Sune, F. de Benedetti, M. van Beuzekom, V. van Beveren, T. Bischoff, H. Boterenbrood, W. Byczynski, M. Campbell, E. Chatzianagnostou, V. Coco, P. Collins, E. Dall’Occo, R. Dumps, F. de Benedetti, T. Evans, A. Fernández Prieto, M. Fransen, A. Gallas Torreira, R. Gao, R. Geertsema, F. Gonçalves Abrantes, V. Gromov, M. M. Halvorsen, B. van der Heijden, K. Heijhoff, M. John, D. Johnson, U. Krämer, E. Lemos Cid, X. Llopart Cudie, M. J. Madurai, D. Oppenhuis, T. Pajero, E. Rodríguez Rodríguez, D. Rolf, A. Sarnatskiy, H. Schindler, P. Vázquez Regueiro, A. Vitkovksiy, M. Williams, G. Wang Abstract The spatial and temporal performance of a telescope system comprising planar silicon sensors bump-bonded to Timepix4-v2 ASICs are assessed at the CERN SPS using a 180 180 GeV/ c c mixed hadron beam. The pointing resolution at the centre of the telescope is 2.3 ± 0.1 ​ μ ​ m 2.3\pm 0.1~\upmu\text{m} and 2.4 ± 0.1 ​ μ ​ m 2.4\pm 0.1~\upmu\text{m} in x and y directions, respectively. The temporal resolution for the combined timestamps on a track using only the information from the Timepix4 planes is found to be 92 ± 5 ​ ps 92\pm 5~\text{\,ps} . The telescope is extensively described including its data acquisition system and dedicated software as well as the corrections applied to the raw measurements. 1 Introduction Precise timing measurements can be added to high-granularity pixel detectors in order to improve the reconstruction of charged-particle trajectories, especially in high-multiplicity environments. This approach, also known as 4D-tracking, is being developed in high-energy-physics experiments as a solution to operate the detectors at high instantaneous luminosities. These measurements are crucial for distinguishing vertices produced in nearly simultaneous collisions, as described in [ 1 ] . A telescope system has been implemented using pixelated silicon sensors bonded to version 2 of the Timepix4 Application Specific Integrated Circuit (ASIC). The main objective is to demonstrate high-rate 4D tracking and achieve combined track timestamps with superior temporal resolution compared to single-hit measurements. The precise four-dimensional pointing resolution can be used for detailed characterisation of advanced detectors with high spatial and temporal precision. The Timepix ASIC family has previously been employed in reconstructing the trajectories of charged particles in several experiments and as an R&D platform for sensors, ASICs, and other detector components essential for the LHCb experiment upgrade [ 2 , 3 , 4 , 5 ] . The Timepix4 [ 6 ] is designed to reach an excellent temporal resolution of around 60\text{\,ps} [ 7 ] , in addition to spatial measurements with micrometre precision. This paper outlines the design of an eight-plane telescope based on the Timepix4 v2 ASIC. It also describes the data acquisition system, operational infrastructure, and dedicated software employed in the setup. The spatial and temporal resolutions of this system are measured using a mixed hadron beam with an energy of 180 GeV at the SPS H8 beam line facility [ 8 ] . 2 Setup description The telescope is composed of two arms, each comprising four detector planes, as depicted in fig. 1 . A global right-handed coordinate system is defined where the z axis is aligned with the direction of the beam, and the y axis points upwards. A diagram of the telescope setup is shown in fig. 2 . Figure 1 : Mechanical design of the telescope arrangement of eight measuring planes and a device under test. The solid line cutting through the planes represents the traversing beam, where particles travel from left to right. Figure 2 : Diagram of the Timepix4 Telescope. The detectors are composed of planar silicon pixel sensors bump bonded to Timepix4 ASICs. They are mounted inside hermetic enclosures described in [ 9 ] . These boxes are supported by four rods to minimise vibrations. The temperature and humidity inside the enclosures are continuously monitored. The slots and corresponding flanges on the top covers are machined with high precision and define the angles of the planes with respect to the beam, as well as the relative distances between planes. The outermost slots of each box have been designed for perpendicular planes and are populated with thin (100 \upmu\text{m} ) sensors to achieve the best timing performance, while the remaining (300 \upmu\text{m} ) sensors are angled at 9^{\circ} with respect to the x and y axes to improve charge sharing between adjacent pixels and obtain a better spatial resolution. With respect to the DUT, the positions of the telescope planes along the z axis are at -470 , -420 , -295 , -265 , 325 , 355 , 480 and 530\text{\,mm} . The base of the telescope is mounted on a remote-controlled motion stage in order to align the entire telescope with respect to the beam in the x and y directions. 2.1 Timepix4 ASIC Timepix4 is the latest pixel readout ASIC for hybrid pixel detectors in the Medipix family [ 10 ] . It was developed in a 65\text{\,}\mathrm{nm} CMOS technology by CERN, Nikhef, and IFAE. The pixel matrix consists of 448\times 512 square pixels with a pitch of 55\text{\,}\mathrm{\SIUnitSymbolMicro m} , and the front-end electronics of the pixels consists of a charge-sensitive preamplifier [ 11 ] with the ability to absorb leakage current from the sensor and a per-pixel threshold adjustment followed by a leading-edge discriminator. The Equivalent Noise Charge (ENC) of the preamplifier depends on the ASIC settings and sensor capacitance and is typically about 80 electrons. The device is usually operated with a threshold of about 1000 electrons. The ASICs are configured to register both the Time of Arrival (ToA) and the Time over Threshold (ToT) of each discriminated signal. The ToT is a measure of the amount of charge in the signal delivered by the sensor ( section 3.1 ) and it is used to improve both the temporal resolution ( section 3.4.3 ) and the spatial resolution. The ToA and ToT are measured by a time-to-digital converter (TDC), using a Voltage-Controlled Oscillator (VCO) with a nominal frequency of 640\text{\,}\mathrm{MHz} . The VCO is shared by a group of two by four pixels, referred to as superpixel. The ToA timestamp is given by the following expression: \textnormal{ToA}=\textnormal{cToA}\times\textnormal{T${}_{\textnormal{clock}}$}-\textnormal{fToA}\times\textnormal{T${}_{\textnormal{VCO}}$}-\textnormal{ufToA}\times\frac{\textnormal{T${}_{\textnormal{VCO}}$}}{8}. (1) Here cToA is a counter of the number of clock ticks of the 40 MHz 1 1 1 The actual clock is 40.08 MHz, which is the clock frequency of the LHC. system clock, with a corresponding period time (T {}_{\textnormal{clock}} ) of 25\text{\,}\mathrm{ns} . The second term, fToA (fine ToA) counts the number of rising edges of the VCO clock, from the arrival of the hit to the first subsequent rising edge of the system clock. The nominal period of the VCO (T {}_{\textnormal{VCO}} ) is around 1.56\text{\,}\mathrm{ns} , with the exact value varying between the superpixels. This is discussed in more detail in section 3.4.2 . The ultra-fine ToA, ufToA, is a further refinement of the measurement using four phase-shifted copies of the VCO clock and has a granularity of T {}_{\textnormal{VCO}} /8. 2.2 Sensors The sensors are manufactured by ADVAFAB and consist of high resistivity p -type silicon with segmented n^{+} pixel implants and a non-segmented p^{+} implant on the backside. The pixelated side

Read the complete text