A method of Extracting Flat Field from Real Time Solar Observation Data
Y.YaHui Jin \orcid 0000-0001-9917-2926, H.Hui Liu \orcid 987-654-3210, K.KaiFan Ji \orcid 987-654-3210, Z.ZhenYu Jin \orcid 987-654-3210, W.WeiJie Meng \orcid 987-654-3210 · 2025
Read A method of Extracting Flat Field from Real Time Solar Observation Data by Y.YaHui Jin \orcid 0000-0001-9917-2926, H.Hui Liu \orcid 987-654-3210, K.KaiFan Ji \orcid 987-654-3210, Z.ZhenYu Jin \orcid 987-654-3210, W.WeiJie Meng \orcid 987-654-3210 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-15094.txt.
Introduction
YaHui Jin and co-authors extract calibration frames from live solar data in this 2025 paper. Solar telescopes need flat field corrections to remove detector patterns from images. Standard methods gather that calibration under special conditions.
Real observing breaks the plan: pointing shifts, wind wobbles the scope, and fixed column noise creeps in. Fringes and stripes then survive the correction. The team's method pulls the flat field from the science data itself. It starts from an averaged frame, then refines it as real frames arrive, seeded by a named algorithm. Wobble, usually a nuisance, becomes the signal that reveals the pattern.
Catalog record
| CREATOR | Y.YaHui Jin \orcid 0000-0001-9917-2926, H.Hui Liu \orcid 987-654-3210, K.KaiFan Ji \orcid 987-654-3210, Z.ZhenYu Jin \orcid 987-654-3210, W.WeiJie Meng \orcid 987-654-3210 |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-15094
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A method of Extracting Flat Field from Real Time Solar Observation Data Y.YaHui Jin \orcid 0000-0001-9917-2926, H.Hui Liu \orcid 987-654-3210, K.KaiFan Ji \orcid 987-654-3210, Z.ZhenYu Jin \orcid 987-654-3210, W.WeiJie Meng \orcid 987-654-3210 Abstract Existing methods for obtaining flat field rely on observed data collected under specific observation conditions to determine the flat field. However, the telescope pointing and the column-fixed pattern noise of the CMOS detector change during actual observations, causing residual signals in real-time observation data after flat field correction, such as interference fringes and column-fixed pattern noise. In actual observations, the slight wobble of the telescope caused by the wind leads to shifts in the observed data. In this paper, a method of extracting the flat field from the real-time solar observation data is proposed. Firstly, the average flat field obtained by multi-frame averaging is used as the initial value. A set of real-time observation data is input into the KLL method to calculate the correction amount for the average flat field. Secondly, the average flat field is corrected using the calculated correction amount to obtain the real flat field for the current observation conditions. To overcome the residual solar structures caused by atmospheric turbulence in the correction amount, real-time observation data are grouped to calculate the correction amounts. These residual solar structures are suppressed by averaging multiple groups, improving the accuracy of the correction amount. The test results from space and ground-based simulated data demonstrate that our method can effectively calculate the correction amount for the average flat field. The NVST 10830 Å/H α \alpha data were also tested. High-resolution reconstruction confirms that the correction amount effectively corrects the average flat field to obtain the real flat field for the current observation conditions. Our method works for chromosphere and photosphere data. keywords Flat field · Data processing · Chromosphere data · Photosphere data 1 Introduction Flat field correction is an important part of astronomical observation data processing, especially in high-resolution ground-based solar observations, where the accuracy of the flat field directly affects the reconstruction results of observed data. Therefore, all large-aperture ground-based solar telescopes, such as the Swedish Solar Telescope (SST), Goode Solar Telescope (GST), New Vacuum Solar Telescope (NVST), and GREGO Solar Telescope ( Yang, Cao, and Yurchyshyn 2022 ) , have made improving the flat field quality an important task. Flat field obtaining methods can be divided into two categories: one is the multi-frame averaging method for small field of view (FOV) observations, which moves the telescope near the solar quiet region and then averages multiple images to obtain the flat field (called average flat field). This method is simple and has high accuracy. The root mean square (RMS) of pixel-to-pixel intensity variation in the flat field is about 0.1% ( Moran, Foukal, and Rabin 1992 ; Yang et al. 2003 ) . The other is the KLL method ( Kuhn, Lin, and Loranz 1991 ) for large FOV observations, which was improved by Chae 2004 . The KLL method records multiple images of solar disk with different parts of the detector by changing the telescope’s pointing. The obtained images are used to calculate the flat field by iteration with some specific algorithm ( Li et al. 2021 ) . At present, it has been widely used in space or ground-based full-disk observations ( Denker et al. 1999 ; Boerner et al. 2012 ; Fang et al. 2013 ) . These methods all rely on a flat field observation pattern to move the telescope and obtain specialized flat field observed data to calculate the flat field. However, the observation conditions change during actual observations. In particular, the change in the telescope’s pointing alters the relative angle between incident light and the detector’s target surface, which in turn affects the intensity of interference fringes in the observed data. In addition, the column-fixed pattern noise of the CMOS detector changes over time ( Wang et al. 2016 ; Qiu et al. 2021 ) . Therefore, even if these methods can obtain a highly accurate flat field, it is still not the real flat field for the current observation conditions. When the flat field obtained by these methods is used for flat field correction of real-time observation data, the corrected observed data still contains residual signals, such as interference fringes and column-fixed pattern noise. These residual signals are further amplified in subsequent high-resolution reconstruction ( Liu et al. 2021 ) , as shown in Figure 1 . Therefore, we need a method for obtaining flat field that can adapt to changes in observation conditions. Figure 1: Panel (a) is NVST/He I 10830 Å observed data (the observed time is 13:42:37 UT on June 5, 2023), panel (b) is the average flat field (the observed time is 07:35:26 UT on June 5, 2023), and panel (c) is the high-resolution data after correction of the average flat field. It can be easily seen that the high-resolution data still contain residual signals after the average flat field correction, such as interference fringes, column-fixed pattern noise. The reconstruction method is non-rigid alignment ( Liu et al. 2022 ) . In small FOV ground-based solar observations, the slight wobble of the telescope caused by the wind leads to shifts in the observed data. We find that displacement characteristics of the observed data meet the requirements for extracting a flat field using the KLL method. Moreover, these observed data are obtained from real-time observations. Therefore, we can input a set of real-time observation data into the KLL method to extract the real flat field for the current observation conditions. However, it is very difficult to extract the real flat field directly from real-time observation data. Although there is a residual signal in the real-time observation data after the average flat field correction, it is still a highly accurate flat field. Therefore, we regard real flat field of real-time observation data as the product of the average flat field and the correction amount. The average flat field is used as the initial value, and the correction amount for the average flat field is dynamically calculated from the real-time observation data using the KLL method. Finally, the calculated correction amount is used to correct the average flat field to obtain the real flat field for the current observation conditions. However, the calculated correction amount may have residual significant solar structures, which will reduce the accuracy of the correction amount. This is because small FOV ground-based observed data are seriously distorted by atmospheric turbulence, which violates the KLL method’s assumption that the solar intensity remains stable for a short time. Due to the random distortion of the observed data caused by atmospheric turbulence, the residual solar structures in the correction amount also exhibit random characteristics. Therefore, we can divide a large number of real-time observation data into multiple groups and use the KLL method to calculate the correction amount from each group. Finally, the correction amounts from multiple groups are averaged to suppress the residual solar structures, thereby improving the accuracy of the correction amount. In this paper, a method of extracting flat field from real-time solar observation data is proposed. Firstly, a large number of real-time observation data are divided into multiple groups. Secondly, the average