A new emitter for electrospray and electrohydrodynamic jet printing
D. Fernández-Martínez, E. J. Vega, A. M. Gañán-Calvo, J. M. Montanero · 2025
Read A new emitter for electrospray and electrohydrodynamic jet printing by D. Fernández-Martínez, E. J. Vega, A. M. Gañán-Calvo, J. M. Montanero (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-15010.txt.
Introduction
Fernández-Martínez and three co-authors propose a new nozzle for spraying charged liquid jets, in a paper from twenty twenty-five. Such jets are used to print fine lines and to feed samples into lab instruments. With liquids that carry charge poorly, the jet often breaks up unless the flow stays above a floor rate.
Their nozzle is beveled and made of a material that does not conduct charge. That shape steadies the jet and drops the floor rate, so far thinner jets form. It also avoids chemical reactions that metal needles cause, keeping the liquid pure. Tests made jets about one micron wide and printed lines only tens of nanometers high.
Catalog record
| CREATOR | D. Fernández-Martínez, E. J. Vega, A. M. Gañán-Calvo, J. M. Montanero |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-15010
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A new emitter for electrospray and electrohydrodynamic jet printing D. Fernández-Martínez, E. J. Vega, A. M. Gañán-Calvo, J. M. Montanero Abstract We propose using a dielectric beveled nozzle for electrospray and electrohydrodynamic jet printing. This nozzle stabilizes the liquid ejection of low-conductivity liquids, considerably reducing the minimum flow rate below which the flow becomes unstable. This translates into a significant reduction of the minimum jet diameter. Due to its dielectric character, electrochemical reactions occurring in metallic beveled nozzles (e.g. hypodermic needles) do not occur, preserving the purity of the liquid. This property makes this nozzle appropriate for Electrospray Ionization Mass Spectrometry (ESI-MS) or bioplotting. We illustrate the capabilities of this new technique by conducting (i) electrospray experiments with Newtonian liquids and (ii) electrohydrodynamic jet printing experiments with viscoelastic fluids. Jets with diameters around 1 μ \mu m are produced with low-conductivity liquids such as octanol and glycerine. Viscoelastic threads a few microns in diameter are gently deposited on a moving substrate to print out uniform lines tens of nanometers in height. Due to the strong stabilizing effect of the beveled nozzle, the minimum flow rate and jet diameter were much smaller than the respective values obtained with the cylindrical capillary in the electrospray and electrohydrodynamic jet printing experiments. The proposed technique opens new routes for electrospray and electrohydrodynamic jet printing. I Introduction Under certain conditions, the interfacial Maxwell stress produced by an intense electric field accelerates the liquid emanating from a cylindrical feeding capillary. The fluid meniscus attached to the feeding capillary adopts a conical shape and steadily emits an electrified jet from its tip ( Gañán-Calvo et al. 2018 ; Rosell-Llompart et al. 2018 ) . The electric stress can reduce the jet diameter several orders of magnitude below the size of the feeding capillary, thus avoiding clogging effects. In the classical cone-jet mode of electrospray, the jet diameter d_{j} scales as d_{j}\sim d_{0}(Q/Q_{0})^{1/2} , where d_{0}=[\sigma\varepsilon_{0}^{2}/(\rho K^{2})]^{1/3} , Q is the injected flow rate, and Q_{0}=\sigma\varepsilon_{o}/(\rho K) ( Gañán-Calvo 2004 ) . Here, \sigma is the surface tension, \varepsilon_{0} is the vacuum dielectric constant, \rho is the liquid density, and K is the electrical conductivity. As can be seen, the jet diameter d_{j} scales as the square root of the injected flow rate Q . This implies that the simplest way of reducing the jet diameter is to decrease the flow rate. However, there is a minimum flow rate Q_{\mbox{\scriptsize{min}}} below which the cone-jet mode becomes unstable. Dimensional analysis dictates that the minimum flow rate obeys the formal relationship Q_{\mbox{\scriptsize{min}}}/Q_{0}=f(\varepsilon,\delta_{\mu}) as long as the stability of the cone-jet mode essentially relies on the local flow in the cone-jet transition region. Here, \delta_{\mu}=[\sigma^{2}\rho\varepsilon_{0}/(\mu^{3}K)]^{1/3} is the electrohydrodynamic Reynolds number ( Gañán-Calvo 2004 ) . It is natural to hypothesize that Q_{\mbox{\scriptsize{min}}}/Q_{0}\simeq g(\varepsilon) for \varepsilon\gg\delta_{\mu}^{-1} and Q_{\mbox{\scriptsize{min}}}/Q_{0}\simeq h(\delta_{\mu}) for \varepsilon\lesssim\delta_{\mu}^{-1} . Experimental results are consistent with the simple scaling laws Q_{\mbox{\scriptsize{min}}}/Q_{0}\sim\varepsilon and Q_{\mbox{\scriptsize{min}}}/Q_{0}\sim\delta_{\mu}^{-1} for the polar and viscous limits, respectively ( Gañán-Calvo et al. 2013 ) . The above results imply that the minimum jet diameter is at least tens of microns for low-conductivity liquids, such as many alcohols and glycerine. This may constitute an important limitation in several applications. A natural question is whether replacing the cylindrical feeding capillary with a different injector can significantly lower the minimum flow rate stability limit and lead to much smaller emitted jets. Different alternatives to the cylindrical feeding capillary have been proposed for several purposes. For instance, externally wetted emitters are used in the electrospray of ionic liquids to develop ion engines for space missions. Electrochemically sharpened and roughened tungsten wires with a few microns tip radii are commonly used to propel micro–satellites ( Lozano and Martínez-Sánchez 2005 ; Lozano and Martínez-Sánchez 2004 ; Castro and Mora 2009 ) . These emitters have also been fabricated on a Si wafer ( Velásquez-García et al. 2006 ) by a MEMS process ( Nakagawa et al. 2017 ) . Emitters microfabricated in porous metals ( Legge and Lozano 2011 ; Huang et al. 2022 ) and borosilicate glass ( Courtney and Shea 2015 ) have also been utilized for this purpose. The development of low-flow rate emitters for Electrospray Ionisation Mass Spectrometry (ESI-MS) ( Fenn et al. 1989 ) has also improved the efficiency of this technique in terms of the amount of sample required. Pointed carbon fiber emitters ( Liu et al. 2004 ; Sen et al. 2006 ) constitute a good example of this. Micrometer emitters made of borosilicate and fused silica are commonly used in nanoelectrospray for highly sensitive mass spectrometry in biological research ( Schmidt et al. 2003 ; Gibson et al. 2009 ) . Electrospray has been used in many other areas. For instance, it can be applied to sputter deposition in surface coating. Nano-droplets were produced to this end by a specially designed wire needle valve ( Sorensen 1999 ) . Electrohydrodynamic (EHD) jet printing is an additive manufacturing technique that can produce high-resolution micro patterns ( Rahman et al. 2012 ; Yang et al. 2018 ) , organic field-effect transistors ( Li et al. 2018 ) , thin-film transistors ( Can et al. 2021 ) , and photodetectors sensors ( Hong et al. 2022 ; Bi et al. 2023 ; Hassan et al. 2024 ) , among other microelectronic products. EHD jet printing is also used to extrude continuous submillimeter filaments of “bioinks” consisting of aqueous media, thermoreversible polymers, or polymer/hydrogel precursors combined with living cells ( Ringeisen et al. 2006 ) . Ultra-high-resolution EHD jet printing was achieved in the pioneering work of Park et al. 2007 with a gold-coated glass microcapillary nozzle with an internal diameter of 2 \mu m. Nozzles with diameters down to 100 nm can be formed by pulling glass pipettes. However, these nozzles suffer from clogging. Li 2005 and Kim et al. 2010 proposed using a polymeric tip coated with non-conductive resin and coaxially inserted in a cylindrical stainless steel nozzle. This procedure was demonstrated to stabilize the jet emission of Newtonian liquids, reducing the minimum voltage to produce that emission. Wang et al. 2012 conducted experiments with a similar device and viscoelastic liquids. The emitters described above entail a drastic reduction in the size of the passages crossed by the liquid to reach the Taylor cone. This inevitably produces clogging effects, especially when particles and macromolecules are dissolved in the liquid. To avoid this, conducting beveled nozzles (also frequently referred to as tilted nozzles) have been proposed as valuable alternatives to the cylindrical capillary in electrospray, EHD jet printing, and other tip streaming configurations. For instance, beveled nozzles have been used in flow focusing to produce microemulsions ( Acero et al. 2013 ) , microdroplets ( Rebollo-Muñoz et al. 2016 ) , and microjets ( Nazari et al. 2020 ) for serial femtosecond crystallography. Conducting beveled nozzles have also been utilized in electrospray for several purposes. Nanostructured thin ceramic ( Chen et al. 1999 ; Ksapabutr et al. 2008 ) and calcium phosphate ( Leeuwenburgh et al. 2003 ) films have been deposited with a beveled stainless steel nozzle ( Jaworek et al. 2018 ) . Fine and highly conductive patterns of silver ink have been fabricated by near-field EHD jet