Mass diffusion and bending in dynamic wetting by phase-field and sharp interface models

Tomas Fullana, Stéphane Zaleski, Gustav Amberg · 2025

Read Mass diffusion and bending in dynamic wetting by phase-field and sharp interface models by Tomas Fullana, Stéphane Zaleski, Gustav Amberg (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-14065.txt.

Introduction

Tomas Fullana and co-authors wrote a 2025 paper on dynamic wetting, where a liquid edge moves over a solid. Classic sharp-interface theory hits a paradox at that moving edge: no-slip flow implies a singularity. Phase-field models dodge the flaw by letting the edge move through diffusion, but they blur the interface. The authors build a toy model that adds diffusion into the sharp view.

Their link comes from the Cahn-Hilliard equations. Total diffusive transport ties to wall curvature near the contact line. From that, they size the highly curved zone and the apparent contact angle. A shifted fake boundary then carries the effect in the sharp model. The work bridges two rival ways of modeling wetting.

Catalog record

CREATORTomas Fullana, Stéphane Zaleski, Gustav Amberg
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE41 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-14065

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Mass diffusion and bending in dynamic wetting by phase-field and sharp interface models Tomas Fullana, Stéphane Zaleski, Gustav Amberg Abstract Dynamic wetting poses a well-known challenge in classical sharp interface formulation as the no-slip wall condition leads to a contact line singularity that is typically regularized with a Navier boundary condition, often requiring empirical fitting for the slip length. On the other hand, this paradox does not appear in phase field models as the contact line moves through diffusive mass transport. In this work, we present a toy model that accounts for mass diffusion at the contact line within a sharp interface framework. This model is based on a theoretical relation derived from the Cahn-Hilliard equations, which links the total diffusive mass transport to the curvature at the wall. From an estimate of the chemical potential on a curved interface, we obtain an expression for the width of the highly curved region δ \delta and the apparent angle. In the sharp interface model, we then introduce a fictitious boundary, displaced of a distance δ \delta into the domain, where a Navier boundary condition is applied along a dynamic apparent contact angle that accounts for the local interface bending. The robustness of the model is assessed by comparing the toy model results with standard phase field ones on two cases: the steady state profiles of a liquid bridge between two plates moving in opposite directions and the transient behaviors of a drop spreading on a solid with a prescribed equilibrium angle. This offers a practical and efficient alternative to solve contact line problems at lower cost in a sharp interface framework with input parameters from phase field models. I Introduction The contact line that forms at the intersection of a fluid-fluid and a solid boundary is a key element of many natural and several technological processes. The dynamics of the contact line has been a subject of debate for several decades Blake and Shikhmurzaev 2002 ; Hocking 1992 ; Eggers and Evans 2004 ; Wilson et al. 2006 ; Shikhmurzaev 2006 ; Bonn 2009 ; Snoeijer and Andreotti 2013 . The classical no-slip boundary condition at a moving fluid interface leads to a force singularity at the contact line, as demonstrated Huh and Scriven Huh and Scriven 1971 , implying that contact line motion would be impossible. In the context of continuum mechanics, in sharp-interface models, one common approach is to introduce a small slip velocity at the contact line using the Navier boundary condition. The slip length, typically on the order of nanometers, is often associated with surface roughness or the mean free path of molecules Lācis et al. 2020 . The Navier slip model combined with an equilibrium contact angle on a mesh-aligned boundary has been extensively studied across various physical setups using different numerical methods. For instance, a rapidly advancing contact line in a curtain coating scenario was simulated in a volume-of-fluid (VOF) framework Fullana et al. 2020 , different numerical methods with the same contact line model were tested in a capillary rise setup Gründing et al. 2020 , a withdrawing plate was simulated using the VOF method with a mesh-dependent slip length Afkhami and Bussmann 2009a . Spreading droplets were explored with mesh-dependent slip Legendre and Maglio 2015 , and the Level-Set method was employed for a spreading drop case, incorporating contact line hysteresis by varying the contact angle based on the contact line speed Spelt 2005 . Recently, a Generalized Navier Boundary Condition implemented within the same sharp interface framework was shown to regularize the logarithmic singularity at the contact line by allowing a deviation of dynamic contact angle with respect to the equilibrium one through the uncompensated Young’s stress Kulkarni et al. 2023 ; Fullana et al. 2024 . These models have in common that they require empirical information on the slip length, which can be viewed as a fitting parameter. On the other hand, in the phase-field method (PF) the Cahn-Hilliard equations are formulated from the thermodynamics of an immiscible two-component mixture and a phase function is used to represent the moving interface. The velocity field can satisfy a no-slip condition at the contact line, and the contact line moves due the diffusive mass transport that is present in a two-component system Jacqmin 1999 ; Yue et al. 2010 . While the phase-field method has the advantage of needing less empirical fitting, it is considerably more expensive. Although it has been shown that it is possible to match the results obtained on dynamic contact lines by fine-tuning the different parameters of the models Lācis et al. 2020 ; Lācis et al. 2022 , an ideal model would mimic the mass diffusion by a simple model; that is to obtain results essentially equivalent to the PF ones by doing much cheaper VOF simulations. We introduce a computational boundary at a specified short distance from the wall in the VOF simulation. There we apply a Navier condition for tangential velocity, and an apparent contact angle that accounts for the interface curvature at the wall. The basis for the model is a theoretical relation between the total diffusive mass transport across the interface and the interface curvature at the wall, that is derived from the Cahn-Hilliard equations. We compare full phase field simulations with VOF simulations using these boundary conditions. The input parameters for these VOF simulations are the same as for the full PF solutions. The VOF solutions reproduce the PF solutions, at a much lower cost, and within the framework of well established methods in CFD. The paper is organized as follows. Section II describes the sharp interface framework and Section III the phase field formulation. In Section IV we derive the toy model for the dynamic contact line starting from the phase field approximation of the incompressible two-phase Navier-Stokes equations. In Section V we show a comparison of the toy model VOF results with standard PF ones on two different systems. Conclusion follows in Section VI . II Sharp interface model The volume-of-fluid method for representing fluid interfaces coupled with a flow solver is well-known to be suited for solving interfacial flows Scardovelli and Zaleski 1999 ; Popinet and Zaleski 1999 ; Tryggvason et al. 2011 . In the present work, we use the free software Basilisk , a platform for the solution of partial differential equations on adaptive Cartesian meshes Popinet 2003 ; Popinet 2009 ; Popinet 2015 . We consider two incompressible, Newtonian and non-miscible fluids. We assume that there is no mass and heat transfer at the fluid-fluid interface, that the surface tension between the two fluids \sigma is constant, and neglect gravity. The two fluids will be denoted l and g for liquid and gas phases, with densities and dynamical viscosities \rho_{l} and \rho_{g} , \mu_{l} and \mu_{g} respectively. In the one-fluid formulation, the unsteady, incompressible, variable density, Navier-Stokes equations read \displaystyle\dfrac{\partial\rho}{\partial t}+\mathbf{\nabla}\cdot(\rho\,\mathbf{u}) \displaystyle=0, (1) \displaystyle\rho\left(\dfrac{\partial\mathbf{u}}{\partial t}+\mathbf{u}\cdot\mathbf{\nabla}\mathbf{u}\right) \displaystyle=-\mathbf{\nabla}P+\mathbf{\nabla}\cdot(2\mu\mathbf{D})+\mathbf{F}_{\sigma}, (2) \displaystyle\mathbf{\nabla}\cdot\mathbf{u} \displaystyle=0, (3) with \mathbf{u}\equiv\mathbf{u}(\mathbf{x},t) the flow velocity, P\equiv P(\mathbf{x},t) the pressure, \mathbf{D}=(\mathbf{\nabla}\mathbf{u}+\mathbf{\nabla}\mathbf{u}^{T})/2 the rate of deformation tensor, \rho\equiv\rho(\mathbf{x},t) the density, \mu\equiv\mu(\mathbf{x},t) the viscosity and \mathbf{F}_{\sigma} the surface tension force. The surface tension term is modeled using the continuum surface force Brackbill et al. 1992 so that \mathbf{F}_{\sigma}=\sigma\,\kappa\,\nabla\chi with \kappa

Read the complete text