Experimental verification of Generalised Synchronization Journal: Physics Letter A
Tania Ghosh, Soumitro Banerjee · 2025
Read Experimental verification of Generalised Synchronization Journal: Physics Letter A by Tania Ghosh, Soumitro Banerjee (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-13586.txt.
Introduction
Tania Ghosh and Soumitro Banerjee show in the lab a special lockstep between two chaotic circuits. In this state, called generalized synchronization, the slave circuit's values follow a fixed rule tied to the master's, even though both stay chaotic. Theory had long said such a state can be forced by the right coupling. Their 2025 work builds it with real hardware.
The pair wired two Lorenz oscillators, a classic chaotic setup, in a one-way link. The slave's signals were scaled to match a set rule based on the master's. Bench tests confirmed the rule held as the circuits ran. The authors say the demo firms up a concept that could serve in secure signals and coupled machine design.
Catalog record
| CREATOR | Tania Ghosh, Soumitro Banerjee |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 13 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-13586
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Experimental verification of Generalised Synchronization Journal: Physics Letter A Tania Ghosh, Soumitro Banerjee Abstract Generalized synchronization (GS) describes a state in which two coupled dynamical systems exhibit a functional relationship between their variables. GS can be achieved by appropriately designing the coupling to constrain the dynamics onto an invariant submanifold, a concept well established in theory. However, experimental validation remains crucial. In this work, we experimentally demonstrate GS using coupled chaotic Lorenz oscillators, implementing unidirectional coupling where the state variables of the slave oscillator are scaled according to a predefined relationship with those of the master oscillator. † † highlights: We experimentally demonstrate generalized synchronization using coupled chaotic Lorenz oscillators, implementing unidirectional coupling where the state variables of the slave oscillator are scaled according to a predefined functional relationship with those of the master oscillator. 1 Introduction Chaotic dynamical systems have been experimentally explored through electronic circuits [ 1 ] , which serve as practical platforms to test theoretical models like the Lorenz [ 2 ] and Rössler [ 3 ] oscillators. These circuits not only realize abstract dynamics physically but also validate their robustness in real-world settings. Synchronization of chaotic systems is a fundamental concept in nonlinear dynamics [ 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 ] , where coupled system trajectories align onto a hyperplane in phase space which is called the synchronization manifold [ 6 , 12 ] . If the manifold is transversally attracting, synchronization remains stable. This can be seen as constraining the system’s flow to a lower-dimensional submanifold. Generalized synchronization (GS) [ 13 , 14 ] extends this concept, where subsystems exhibit a functional relationship governed by their coupling but are not identical under simple transformations like inversion or time delay. The functional relationship can be projective synchronization, nonlinear scaling, or any other form as long as it is smooth and invertible. Chishti and Ramaswamy [ 19 ] further generalized this to arbitrary submanifolds. Generalized synchronization (GS) has been experimentally demonstrated on various systems [ 14 , 15 , 16 , 17 ] spanning different frequency regimes, from high [ 18 ] to low frequencies [ 15 ] . In this Letter, we experimentally verify that coupling two electronic circuits with a targeted functional dependence between their variables can produce a specific state of generalized synchronization. In our study, we used two identical Lorenz oscillators, although the approach is applicable to any pair of nonlinear systems. We used two types of functional dependencies, projective synchronization and a non-linear scaling relationship, to verify generalized synchronization in the coupled systems. 2 Theory of Generalized Synchronization Consider two coupled dynamical systems: \dot{x}=F_{1}(x)+\zeta(x,y),\quad\dot{y}=F_{2}(y)+\zeta(x,y), (1) where x\in\mathbb{R}^{m} and y\in\mathbb{R}^{n} are the state variables and \zeta(x,y) are the coupling terms. Combining these into a vector X=\begin{bmatrix}x\\ y\end{bmatrix} , the system becomes: \dot{X}=F(X)+\epsilon(X) (2) We define a set of constraints \Phi(x,y)=0 to constrain the dynamics to a submanifold M [ 19 ] . The flow must be orthogonal to the normal vectors of this submanifold, given by: N_{i}(X)=\nabla_{X}\phi_{i}(x,y). (3) The normal matrix is: n=\nabla_{X}^{\top}\Phi(X)=\begin{bmatrix}N_{1}&N_{2}&\dots&N_{N}\end{bmatrix}^{\top}. (4) The condition for invariance on the submanifold is: n\zeta=-nF, (5) from which the coupling functions \zeta_{i} can be determined. This methodology allows us to design couplings that ensure generalized synchronization, as introduced in [ 19 ] . 3 Modified Projective Synchrony Among generalized synchronization (GS), a specific type of synchronization is Modified Projective Synchronization (MPS) [ 20 , 21 ] , where the driving and response systems synchronize up to a scaling factor. Using the concept of MPS [ 19 ] , the target submanifold in a six-dimensional phase space is considered as: y=\Lambda x (6) where \Lambda=\begin{bmatrix}a&0&0\\ 0&b&0\\ 0&0&c\end{bmatrix}. (7) As a specific example, we consider a system of two coupled Lorenz oscillators [ 2 ] . Each oscillator has a flow equation in \textbf{X}\in\textbf{$R^{3}$} \left.\begin{array}[]{r@{\;}l}\dot{x_{\rm 1}}&=\sigma(x_{\rm 1}-x_{\rm 2})\\ \dot{x_{\rm 2}}&=x_{\rm 1}(\rho-x_{\rm 3})-x_{\rm 2}\\ \dot{x_{\rm 3}}&=x_{\rm 1}x_{\rm 2}-\beta x_{\rm 3}\end{array}\right\} (8) \left.\begin{array}[]{r@{\;}l}\dot{y_{\rm 1}}&=\sigma(y_{\rm 1}-y_{\rm 2})\\ \dot{y_{\rm 2}}&=y_{\rm 1}(\rho-y_{\rm 3})-y_{\rm 2}\\ \dot{y_{\rm 3}}&=y_{\rm 1}y_{\rm 2}-\beta y_{\rm 3}\end{array}\right\} (9) where \sigma , \rho , and \beta are their parameters. Using the above method, [ 19 ] showed that one solution of unidirectional coupling can be obtained by setting \zeta_{1} as a null vector and choosing \zeta_{2} as \zeta_{2}=\begin{bmatrix}\sigma(a-b)x_{2}\\ (b-a)\rho x_{1}+(ac-b)x_{1}x_{3}\\ (c-ab)x_{1}x_{2}\end{bmatrix} (10) 3.1 Circuit Implementation In this work, we implement the above system with unidirectional coupling, for which the master and slave equations are modified as follows: \displaystyle\dot{x_{1}} \displaystyle=\sigma(x_{1}-x_{2}) \displaystyle\quad\dot{y_{1}} \displaystyle=\sigma(y_{1}-y_{2})+\sigma(a-b)x_{2} (11) \displaystyle\dot{x_{2}} \displaystyle=x_{1}(\rho-x_{3})-x_{2} \displaystyle\quad\dot{y_{2}} \displaystyle=y_{1}(\rho-y_{3})-y_{2}+(b-a)\rho x_{1}+(ac-b)x_{1}x_{3} \displaystyle\dot{x_{3}} \displaystyle=x_{1}x_{2}-\beta x_{3} \displaystyle\quad\dot{y_{3}} \displaystyle=y_{1}y_{2}-\beta y_{3}+(c-ab)x_{1}x_{2} The Lorenz equations were scaled down by a factor of 10 so that the variables remain within the useful range of electronic devices. Using the same technique used in [ 1 ] , we transformed Eq. 11 into the final equations for implementation: \left.\begin{array}[]{r@{\;}l}CR\dot{x_{\rm 1}}&=-\frac{R}{R_{1}}(x_{\rm 1}-x_{\rm 2})\\ CR\dot{x_{\rm 2}}&=-(\frac{R}{R_{4}}x_{\rm 2}-\frac{R}{R_{2}}x_{\rm 1}+\frac{R}{R_{3}}\frac{x_{\rm 1}x_{\rm 3}}{10})\\ CR\dot{x_{\rm 3}}&=-(\frac{R}{R_{3}}\frac{x_{\rm 1}x_{\rm 2}}{10}-\frac{R}{R_{5}}x_{\rm 3})\end{array}\right\} (12) \left.\begin{array}[]{r@{\;}l}CR\dot{y_{\rm 1}}&=-(\frac{R}{R_{1}}(y_{\rm 1}-y_{\rm 2})-\frac{R}{R_{6}}x_{\rm 2})\\ CR\dot{y_{\rm 2}}&=-(\frac{R}{R_{4}}y_{\rm 2}-\frac{R}{R_{2}}y_{\rm 1}+\frac{R}{R_{3}}\frac{y_{\rm 1}y_{\rm 3}}{10}+\frac{R}{R_{7}}x_{\rm 1}-\frac{R}{R_{8}}\frac{x_{\rm 1}x_{\rm 3}}{10})\\ CR\dot{y_{\rm 3}}&=-(\frac{R}{R_{3}}\frac{y_{\rm 1}y_{\rm 2}}{10}-\frac{R}{R_{5}}y_{\rm 3}+\frac{R}{R_{9}}\frac{x_{\rm 1}x_{\rm 2}}{10})\end{array}\right\} (13) We built an electronic circuit implementing Eq. 12 and Eq. 13 , ensuring that the governing equations of the circuit align with those of Eq. 11 . The circuit was constructed with AD633JN multipliers, TL084 operational amplifiers, resistors, and polyester capacitors (10 nF). The resistance values were selected as shown in Fig. 1 to achieve the scaling factors a=2.6 , b=1.8 , and c=3.6 . Fig. 1 provides a detailed schematic of the circuit, which incorporates unidirectional coupling. Figure 1: Circuit implementation for projective synchronization, where y_{1}=2.6x_{1} , y_{2}=1.8x_{2} , and y_{3}=3.6x_{3} . 3.2 Experimental Result Fig. 2 demonstrates successful projective synchronization (PS) between two coupled Lorenz oscillators, with the relationships y_{1}=2.6x_{1},y_{2}=1.8x_{2} , y_{3}=3.6x_{3} . In the figure, the signals of x_{1} and y_{1} with the x-z phase space for the two oscillators are shown as observed from the oscilloscope. The blue/purple traces represent the first (master) oscillator, and the green trace corresponds to the second (slave) oscillator. This confirms the achievement of generalized synchronization (GS), where the variables of the second oscillator exhibit a specific functional dependence on the first, expressed as y(t)=f(x(t)) , with distinct scaling factors for each variable. Figure 2: Experimental results: synchronized time series and phase space trajectories. Projective synchronization in coupled Lorenz oscillators for the specific electronic circuit shown in Fig. 1 , using resistor values that result in scaling factors a=1.6 , b=1.8 , and c=3.6 . 4 Nonlinear Scaling The second example we consider involves the case where variable in the slave oscillator becomes a nonlinear function of a variable in the master oscillator. In particular, we intend to achieve the relationship y_{1}=x_{1},\;\;y_{2}=x_{2},\;\;\mbox{and}\;\;y_{3}=\frac{x_{3}^{2}}{10}+\frac{9x_{3}}{10} for two coupled Lorenz systems. For unidirectional coupling, one solution is \zeta_{1} as a null vector, and \zeta_{2} is given by: \mbox{\boldmath$\zeta$}_{2}=\begin{bmatrix}0\\ -\frac{x_{3}y_{1}}{10}+\frac{x_{1}x_{3}^{2}}{10}\\ -\frac{x_{1}x_{2}}{10}+\frac{2x_{1}x_{2}x_{3}}{10}-\frac{\beta x_{3}^{2}}{10}\end{bmatrix} (14) 4.1 Circuit Implementation For nonlinear scaling with unidirectional coupling, the slave equation is modified as follows: \displaystyle\dot{y_{1}} \displaystyle=\sigma(y_{1}-y_{2})+0 (15) \displaystyle\dot{y_{2}} \displaystyle=y_{1}(\rho-y_{3})-y_{2}-\frac{x_{3}y_{1}}{10}+\frac{x_{1}x_{3}^{2}}{10} \displaystyle\dot{y_{3}} \displaystyle=y_{1}y_{2}-\beta y_{3}-\frac{x_{1}x_{2}}{10}+\frac{2x_{1}x_{2}x_{3}}{10}-\frac{\beta x_{3}^{2}}{10} Equations for implementation are \left.\begin{array}[]{r@{\;}l}CR\dot{x_{\rm 1}}&=-\frac{R}{R_{1}}(x_{\rm 1}-x_{\rm 2})\\ CR\dot{x_{\rm 2}}&=-(\frac{R}{R_{4}}x_{\rm 2}-\frac{R}{R_{2}}x_{\rm 1}+\frac{R}{R_{3}}\frac{x_{\rm 1}x_{\rm 3}}{10})\\ CR\dot{x_{\rm 3}}&=-(\frac{R}{R_{6}}\frac{x_{\rm 1}x_{\rm 2}}{10}-\frac{R}{R_{5}}x_{\rm 3})\end{array}\right\} (16) \left.\begin{array}[]{r@{\;}l}CR\dot{y_{\rm 1}}&=-\frac{R}{R_{1}}(y_{\rm 1}-y_{\rm 2})\\ CR\dot{y_{\rm 2}}&=-(\frac{R}{R_{4}}y_{\rm 2}-\frac{R}{R_{2}}y_{\rm 1}+\frac{R}{R_{3}}\frac{y_{\rm 1}y_{\rm 3}}{10}-\frac{R}{R_{7}}\frac{x_{\rm 1}x_{\rm 3}^{2}}{100}+\frac{R}{R_{8}}\frac{x_{\rm 1}x_{\rm 3}}{10})\\ CR\dot{y_{\rm 3}}&=-(\frac{R}{R_{5}}y_{\rm 3}-\frac{R}{R_{6}}\frac{y_{\rm 1}y_{\rm 2}}{10}-\frac{R}{R_{9}}\frac{x_{\rm 1}x_{\rm 2}x_{\rm 3}}{100}+\frac{R}{R_{10}}\frac{x_{\rm 1}x_{\rm