3D morphology formation in a mixture of three differently averse components

Emilio N.M. Cirillo, Nicklas Jävergård, Rainey Lyons, Adrian Muntean, Stela Andrea Muntean · 2025

Read 3D morphology formation in a mixture of three differently averse components by Emilio N.M. Cirillo, Nicklas Jävergård, Rainey Lyons, Adrian Muntean, Stela Andrea Muntean (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-13338.txt.

Introduction

Emilio Cirillo and co-authors model pattern growth in three-part mixtures in a 2025 paper. Drying polymer blends form the films inside devices like organic solar cells, and their inner pattern sets device quality. The team study a three-component mix without drying, in full 3D.

Two models, a lattice one and a smooth one, agree on the outcome. At low solvent share, the two polymers weave through each other in twin networks. At high solvent share, lone polymer islands float in solvent. The lattice model still forms clusters in 3D at high solvent, where space might have blocked them. Processing guides can use the two-regime map.

Catalog record

CREATOREmilio N.M. Cirillo, Nicklas Jävergård, Rainey Lyons, Adrian Muntean, Stela Andrea Muntean
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE33 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-13338

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

3D morphology formation in a mixture of three differently averse components Emilio N.M. Cirillo, Nicklas Jävergård, Rainey Lyons, Adrian Muntean, Stela Andrea Muntean Abstract Film formation from solvent evaporation in polymer ternary solutions is relevant for several technological applications, such as the fabrication of organic solar cells. The performance of the final device will strongly depend on the internal morphology of the obtained film, which, in turn, is affected by the processing conditions. We are interested in modeling morphology formation in 3D for ternary mixtures using both a lattice model and its continuous counterpart in the absence of evaporation. In our previous works, we found that, in 2D, both models predict the existence of two distinct regimes: (i) a low-solvent regime, characterized by two interpenetrated domains of the two polymers, and (ii) a high-solvent regime, where isolated polymer domains are dispersed in the solvent background. In the significantly more intriguing 3D case, we observe a comparable scenario both for the discrete and the continuous model. The lattice model reveals its ability to describe morphology formation even in the high solvent content 3D case, in which the three-dimensional nature of space could have prevented cluster formation. 1 Introduction Morphology formation in solution processed thin films is crucial for organic solar cells (OSCs) as it strongly affects their efficiency and stability [ 14 , 25 , 30 ] . A well-optimized nanoscale morphology enables efficient exciton separation and charge movement in organic photovoltaic devices while minimizing losses caused by recombination. These morphologies can also influence processability, scalability, and light absorption, hence further impacting overall device performance. Efforts are made to follow the in situ evolution of the morphology [ 36 ] , modeling and simulations playing a crucial role in completing the insights in this direction [ 24 , 28 , 32 ] . However, in spite of the enormous volume of literature concerning the phase separation of binary mixtures in 2D, achieving a good theoretical understanding of morphology formation in multi-component systems in 3D remains a significant challenge. We aim to generate various morphology classes suitable for the study of OSCs through numerical simulations. Notably, our findings may also be relevant to other composite thin-film materials, such as adhesive bands [ 15 ] . While some partial results exist for Cahn-Hilliard-type systems, general conclusions have yet to be established (see, e.g., [ 13 , 31 ] ). Numerical simulations, however, offer valuable insights into specific scenarios. For related studies on the numerical simulation of the Cahn-Hilliard equation in 3D, we refer the reader to [ 1 , 37 , 35 , 29 ] . In this work, we present our latest findings on the numerical simulation of morphology formation in ternary systems in 3D, where one component acts as a background solvent, effectively shielding the other two, which strongly repel each other. The reference case we consider cannot be directly captured by straightforward generalizations of the Cahn-Hilliard theory for three-component phase separation. Instead, we have previously demonstrated that, at least in 2D, the Blume-Capel particle model with Kawasaki dynamics (compare [ 4 , 27 , 5 ] ), along with a continuum counterpart—a system of two strongly coupled, nonlocal, nonlinear drift-diffusion equations ( [ 22 , 19 , 21 ] )—provide an adequate description of this phenomenon. These models, therefore, serve as useful tools for exploring phase separation in such systems. We efficiently succeeded to simulate both the discrete and the continuous model in 3D, performing a thorough qualitative analysis of their ability to produce morphologies. In this challenging 3D case, we observe a comparable scenario both for the discrete and continuous case, with respect to our previous 2D results [ 21 , 19 ] , namely the existence of a low–solvent regime in which the two polymers form interpenetrated domains, and a high–solvent regime where isolated polymer domains float in a solvent background. When the models are run with high solvent content, the three-dimensional nature of space plays a key role in regulating cluster formation, since particles move following an essentialy random motion. We show that even in this regime the 3D space structure does not prevent cluster formation. These effects are crucial for understanding real–world applications, where film formation occurs in three-dimensional environments, and can provide deeper insights into optimizing processing conditions for polymer–based technologies. This work is organized as follows: In Section 2 we present our stochastic lattice model as well as the 3D morphologies we obtain using it for a selection of model parameters. In Section 3 , we introduce the continuum model together with the corresponding 3D numerical simulations of the morphologies. Finally, we conclude this work in Section 4 with an outlook on possible further developments around generating in silico 3D morphologies suitable for ensuring an optimized transport of charges and related applications. 2 Morphology formation in 3D via a spin lattice model To study morphology formation in a ternary mixture of two active components and one common solvent, we adopt the Blume–Capel model, as in our previous papers [ 4 , 27 , 5 ] , where we investigated the 2D case. As discussed above, in this paper we consider for the first time this problem in 3D. As much as possible, we shall adopt similar notation and use a similar language, in order to facilitate the reader willing to compare the results of this manuscript to the aforementioned previous work. Moreover, in our graphical representations of the system configurations we shall use color codes analogous to the ones used in the previous papers. 2.1 Description of the lattice model Let us consider \mathbb{Z}^{3} embedded in \mathbb{R}^{3} . We refer to its elements as sites and, given two of them i,i^{\prime}\in\mathbb{Z}^{3} , let |i-i^{\prime}| be their Euclidean distance. Given i\in\mathbb{Z}^{3} , the site i^{\prime}\in\mathbb{Z}^{3} is a nearest neighbor of i if and only if |i-i^{\prime}|=1 . A bond is a pair of neighboring sites. We denote by \Lambda the cubic torus \{0,\dots,L-1\}^{3}\subset\mathbb{Z}^{3} and associate each site i of \Lambda with a spin variable \sigma(i) taking values in the single spin state space \{-1,0,+1\} . The configuration or state space is \mathcal{X}=\{-1,0,+1\}^{\Lambda} . The energy of the configuration \sigma\in\mathcal{X} is given by the Hamiltonian function H:\mathcal{X}\to\mathbb{R} via H(\sigma)=J\sum_{\langle i,j\rangle}[\sigma(i)-\sigma(j)]^{2}, (1) with J>0 , where the sum is extended to the 3L^{3} bonds with periodic boundary conditions due to the torus topology. According to the more mathematical oriented literature (see e.g., [ 10 , 6 , 9 ] ), the function ( 1 ) is called the Hamiltonian of the Blume–Capel with zero magnetic field and chemical potential. We remark that ( 1 ) would be addressed in the physics literature [ 11 , 3 ] as the Hamiltonian of the Blume–Capel model with ferromagnetic coupling 2J , magnetic field zero, and crystal field 4J . In the usual spin model language, a site i with \sigma(i)=\pm 1 is considered occupied by a particle with spin \pm 1 , whereas it is considered empty if \sigma(i)=0 . In our polymer interpretation the \pm 1 and 0 spins will represent polymer and solvent molecules, respectively. In Statistical Mechanics, the equilibrium properties of the system are described by the Gibbs measure \exp\{-\beta H(\sigma)\}/\sum_{\eta\in\mathcal{X}}\exp\{-\beta H(\eta)\} , where \beta is

Read the complete text