KA-TP-05-2025 RelExt : A New Dark Matter Tool for the Exploration of Dark Matter Models

Rodrigo Capucha, Karim Elyaouti, Margarete Mühlleitner, Johann Plotnikov, Rui Santos, [9mm] Centro de Física Teórica e Computacional, Faculdade de Ciências,Universidade de Lisboa, Campo Grande, Edifício C8 1749-016 Lisboa, Portugal, [3mm] Institute for Theoretical Physics, Karlsruhe Institute of Tec · 2025

Read KA-TP-05-2025 RelExt : A New Dark Matter Tool for the Exploration of Dark Matter Models by Rodrigo Capucha, Karim Elyaouti, Margarete Mühlleitner, Johann Plotnikov, Rui Santos, [9mm] Centro de Física Teórica e Computacional, Faculdade de Ciências,Universidade de Lisboa, Campo Grande, Edifício C8 1749-016 Lisboa, Portugal, [3mm] Institute for Theoretical Physics, Karlsruhe Institute of Tec (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-13087.txt.

Introduction

Rodrigo Capucha and colleagues present a software tool that helps theorists check whether a proposed dark matter particle would leave the right cosmic abundance. The early universe froze out a relic density that telescopes have measured. Any new model must match it. Writing in twenty twenty-five, their program scans a model's parameter space for combinations that hit the measured value within the user's tolerance. It handles freeze-out annihilation and co-annihilation automatically. Several models come pre-installed. Arbitrary models with a stabilizing symmetry can be added through standard model files.

The code generates the needed amplitudes and thermally averaged cross sections by itself. It then solves the Boltzmann equation for the relic density. Links to companion tools check experimental constraints or trace the model's phase history, including possible gravitational wave signals.

Catalog record

CREATORRodrigo Capucha, Karim Elyaouti, Margarete Mühlleitner, Johann Plotnikov, Rui Santos, [9mm] Centro de Física Teórica e Computacional, Faculdade de Ciências,Universidade de Lisboa, Campo Grande, Edifício C8 1749-016 Lisboa, Portugal, [3mm] Institute for Theoretical Physics, Karlsruhe Institute of Tec
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE101 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-13087

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

KA-TP-05-2025 RelExt : A New Dark Matter Tool for the Exploration of Dark Matter Models Rodrigo Capucha, Karim Elyaouti, Margarete Mühlleitner, Johann Plotnikov, Rui Santos, [9mm] Centro de Física Teórica e Computacional, Faculdade de Ciências,Universidade de Lisboa, Campo Grande, Edifício C8 1749-016 Lisboa, Portugal, [3mm] Institute for Theoretical Physics, Karlsruhe Institute of Technology,Wolfgang-Gaede-Str. 1, 76131 Karlsruhe, Germany., [3mm] ISEL - Instituto Superior de Engenharia de Lisboa,Instituto Politécnico de Lisboa 1959-007 Lisboa, Portugal [3mm] Abstract We present the C++ program RelExt for Standard Model (SM) extensions that feature a Dark Matter (DM) candidate. The tool allows to efficiently scan the parameter spaces of these models to find parameter combinations that lead to relic density values which are compatible with the measured value within the uncertainty specified by the user. The code computes the relic density for freeze-out (co-)annihilation processes. The user can choose between several pre-installed models or any arbitrary other model featuring a discrete ℤ 2 \mathbb{Z}_{2} symmetry, by solely providing the corresponding FeynRules model files. The code automatically generates the required (co-)annihilation amplitudes and thermally averaged cross sections, including the total widths in the s s -channel mediators, and solves the Boltzmann equation to determine the relic density. It can easily be linked to other tools like e.g. ScannerS to check for the relevant theoretical and experimental constraints, or to BSMPT to investigate the phase history of the model and possibly related gravitational waves signals. 1 Introduction The true nature of Dark Matter (DM) is one of the most prominent open questions of contemporary particle physics. While the Standard Model (SM) of particle physics has been structurally completed with the discovery of the Higgs boson [ 1 , 2 ] , which turned out to behave very SM-like, and has been tested to the highest accuracy, it does not provide a viable DM candidate. Numerous astrophysical and cosmological observations point to the existence of DM [ 3 , 4 , 5 , 6 , 7 , 8 ] . However, it remains totally unclear what is the nature of DM. It can range from particle character to supermassive objects like e.g. primordial black holes [ 9 ] , and thus cover a huge mass range. Assuming particle character for DM, there are two main mechanisms that can produce DM in agreement with all observables, in particular the measured relic density [ 10 ] . These are given by freeze-in [ 11 ] and freeze-out [ 12 , 13 ] , where we consider here the latter process. In the freeze-out mechanism, weakly interacting massive particles (WIMPs) are assumed to be in thermal equilibrium with the thermal bath until the expansion rate of the universe becomes larger than the DM (co-)annihilation rate into lighter particles. The thermal relic density that we observe today is then obtained from the solution of the Boltzmann equation for the evolution of the DM number density. A prerequisite for any model predicting DM is its compatibility with observations. Besides theoretical and other experimental constraints, the involved DM particles have to be compatible with collider search limits, constraints from direct detection and indirect detection, and last but not least they have to lead to the correct relic density. A minimum requirement is that the predicted relic density does not exceed the experimental value. In this context, models implying a relic density below the observed value may be considered as phenomenologically viable, if one assumes that there may exist extensions of the model with DM particles saturating the relic density. An interesting question, however, is whether there still exists parameter combinations of the model under investigation that lead to the measured value of the relic density within the experimental uncertainties and what their phenomenological implications would be. Depending on the complexity of the parameter space, it may turn out to be quite time consuming to find such parameter sets, and sophisticated scan procedures are required. There exist numerous codes that calculate for beyond-SM (BSM) extensions DM observables, in particular the DM relic density, such as SuperIso Relic [ 14 ] , DarkSUSY [ 15 ] , MicrOMEGAs [ 16 , 17 , 18 , 19 ] , or MadDM [ 20 , 21 , 22 ] . 1 1 1 There are many more DM tools publicly available, cf. e.g. the review [ 23 ] . These tools calculate the relic density obtained from the freeze-out of WIMPs. The codes SuperIso Relic and DarkSUSY have (originally) been written for supersymmetric (SUSY) extensions. In the case of DarkSUSY , the users can also directly provide the thermally averaged cross section (TAC) for their model to compute the relic density. In MicrOMEGAs and MadDM all matrix elements are automatically calculated during the execution of the program by CalcHEP [ 24 ] and MadGraph5_aMC@NLO [ 25 ] , respectively. They can also handle multi-component DM. All these codes rely on leading-order matrix elements. In MicrOMEGAs , the TACs can be improved to include next-to-leading order (NLO) terms by editing predefined functions. For DM in the minimal supersymmetric extension (MSSM), the code DM@NLO [ 26 , 27 ] exists, which provides the NLO (SUSY) QCD calculation to DM (co-)annihilation. The programs furthermore compute the direct detection cross sections. For further details and codes including indirect DM searches, we refer to [ 23 ] . In this paper, we present a new tool, the C++ code RelExt . The code computes the relic density based on the freeze-out mechanism for arbitrary models featuring a DM candidate stabilized by a discrete \mathbb{Z}_{2} symmetry. The user solely has to provide the FeynRules [ 28 ] model files, and the relic density is then automatically computed by RelExt . In this first release, the relic density is computed to leading-order in the thermally averaged cross section of the DM (co-)annihilation channels. The distinctly new feature of the code w.r.t. existing codes is the scan procedure. The code implements an efficient scan algorithm that searches for parameter configurations that generate the correct relic density within the experimentally allowed limits, provided the model under investigation is able to saturate the relic density. The code thereby provides a powerful tool to further constrain DM models by requiring the reproduction of the correct DM relic density. This can be used to subsequently investigate the phenomenological implications of this constraint for current and future collider and DM experiments on the one hand. On the other hand, this kind of investigation gives guidelines for further model building, in case the favored DM fails to reproduce the measured DM relic density. In summary, the new DM code RelExt includes significantly new features beyond the existing DM tools, which are: • The incorporation of efficient scan algorithms for parameter configurations within arbitrary DM models, that feature the correct relic density within the experimentally allowed uncertainties. The user solely needs to provide the model files and the code automatically calculates the DM relic density. • The code has been set up such that it is extendable to include next-to-leading-order (NLO) corrections to the DM (co-)annihilation processes. The computation and validation of the NLO relic density in a specific DM model is in progress and will be published after this first release. • Having written

Read the complete text