Single-photon-added coherent state based postselected weak measurement
Yi-Fang Ren, Yusuf Turek · 2025
Read Single-photon-added coherent state based postselected weak measurement by Yi-Fang Ren, Yusuf Turek (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-12865.txt.
Introduction
Yi-Fang Ren and Yusuf Turek study a delicate measurement trick that uses light with one extra photon, in this 2025 physics paper. Weak measurement with postselection can amplify tiny effects, at the cost of throwing most trials away. The meter here is a beam prepared as a coherent state with a single photon added, whose statistics can be tuned.
The authors analyze both the precision of the final estimate and the signal to noise ratio. Under the right settings the scheme beats conventional measurement plans on both counts. They also spell out a variant suited to light and atom setups, where the same ideas already circulate. The work ties the method to a practical payoff: reading off the phase of a light field from the weak values of the system it touched.
Catalog record
| CREATOR | Yi-Fang Ren, Yusuf Turek |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 52 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-12865
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Single-photon-added coherent state based postselected weak measurement Yi-Fang Ren, Yusuf Turek Abstract We investigated precision measurements in a two-level system coupled to a single-photon-added coherent state (SPACS) under postselection measurement. We analyzed strategies for improving measurement precision, including parameter estimation and the signal-to-noise ratio (SNR) in postselected weak measurements using the photon statistics of SPACS as the meter. Our results demonstrate that SPACS-based postselected weak measurements can outperform conventional measurement schemes in terms of precision. Additionally, we explicitly introduced an alternative weak measurement method commonly applied in dispersive light-atom interactions. Our work offers a new way for addressing fundamental issues in quantum precision measurement based on photon statistics, and it provides a method for extracting the phase and phase shifts of radiation fields through the weak values of system observables. I Introduction Quantum measurement is a fundamental aspect of quantum mechanics and is essential to understand the microscopic world. Von Neumann’s projective strong measurement and weak measurement proposed by Aharonov et al. ( Aharonov et al. 1988 ) are two central approaches within the study of quantum measurement problems. Both measurement models can be applied in quantum metrology, enabling the extraction of desired system information using appropriate methodologies. However, in recent years, the weak measurement theory proposed by Aharonov et al. has attracted considerable attention due to their unique features in a wide variety of practical applications in precision measurements compared to strong projective measurements ( Wang et al. 2016 ; Chen et al. 2018 ; Xu et al. 2020 ; Huang et al. 2025 ) . In the context of weak measurements, postselection allows for the emergence of the weak value, which can fall outside the range of the observable eigenvalues of the system ( Y. Aharonov and Lebowitz 1964 ; Aharonov and Vaidman 2008 ; Matzkin 2019 ) . The weak value can become arbitrarily large by appropriately selecting the initial and postselected system states. This phenomenon, known as weak value amplification (WVA), has emerged as a powerful technique in quantum metrology for amplifying small physical effects across various research areas, the detection of the spin Hall effect ( Hosten and Kwiat 2008 ; Zhou et al. 2012 ) , phase shifts ( Brunner and Simon 2010 ; Xu et al. 2013 ; Qiu et al. 2017 ) and nonlinearities ( Feizpour et al. 2011 ; Wang et al. 2020 ) . For detailed discussions on applications of weak measurements in various research fields, the reader is referred to ( Kofman et al. 2012 ; Tamir and Cohen 2013 ; Dressel et al. 2014 ) and the references therein. WVA has several practical applications in quantum metrology, as it enhances measurement precision through postselection, as investigated in Ref. ( Arvidsson-Shukur et al. 2020a ; Xu and Zhang 2024 ) . However, achieving large amplification through postselection typically results in a lower success probability, which can reduce its metrological advantage. Although postselected weak measurements employing WVA have successfully addressed several precision measurement challenges ( Dixon et al. 2009 ; Zhou et al. 2013 ; Starling et al. 2010 ) , controversy remains regarding the optimal WVA strategy for maximizing measurement precision ( Pang and Brun 2015 ; Liu et al. 2022 ; Tanaka and Yamamoto 2013 ; Zhang et al. 2015 ; yao Guo et al. 2021 ) . A key issue in quantum metrology is how to enhance parameter estimation precision efficiently, using practical and cost-effective resources. The widely used benchmarks to quantify the accuracy of the unknown estimated parameters are signal-to-noise ratio (SNR) and quantum Fisher information (QFI) ( Knee et al. 2013 ; Tanaka and Yamamoto 2013 ; Ferrie and Combes 2014 ; Pang and Brun 2015 ; Zhang et al. 2015 ; Jordan et al. 2014 ; Ren et al. 2020 ; Liu et al. 2022 ) . In Ref. ( Tanaka and Yamamoto 2013 ; Zhang et al. 2015 ) , the results suggest the negative conclusion that weak measurement cannot improve parameter estimation based on the Fisher information (FI) conditioned on successful postselection. However, in recent work ( Liu et al. 2022 ) , WVA metrology was investigated using an optical coherent state as a meter, demonstrating that the FI in the WVA-based scheme can surpass that of conventional measurements not employing postselection. This interesting result contradicts the conclusion of Ref. ( Rivas and Luis 2010 ) , which claimed that for a linear detection scheme without postselection, achieving metrological resolution beyond the coherent state limit is genuinely due to a nonclassical effect. In other studies ( Pang and Brun 2015 ; Turek et al. 2015 ; yao Guo et al. 2021 ; Turek et al. 2023a ) , improvements in the precision of WVA measurements, characterized by a higher SNR compared to conventional measurements, were confirmed using nonclassical meter states. A coherent state is a convenient choice due to its semi-classical nature. However, in Ref. ( Liu et al. 2022 ) demonstrated that higher WVA-QFI compared to conventional measurements is achieved only in the regime of stronger measurement strength. This result raises the question of whether it is possible to achieve a similar advantage using a coherent state in regimes of weaker interaction strength. In the context of weak measurements, we may consider measurement interaction Hamiltonians of the von Neumann type g\hat{A}\otimes\hat{P} or g\hat{A}\otimes\hat{X} where \hat{A} represents the observable of the measured system, and \hat{P} and \hat{X} denote the canonical momentum and position operators of the meter, respectively. These operators satisfy the canonical commutation relation [\hat{X},\hat{P}]=i . In recent studies ( Clerk et al. 2010 ; Zhang et al. 2015 ; Zhang et al. 2019 ; Liu et al. 2022 ) , quantum measurement based on photon-number interactions of the type g\hat{A}\otimes\hat{n} has been considered. Here, \hat{n}=\hat{a}^{\dagger}\hat{a} is denotes the photon-number operator and its canonically conjugate pair called “phase operator”. Even though there have no well-defined phase operator, Paul Dirac firstly postulated a phenomenological uncertainty relation for the electromagnetic field phase and photon number, \Delta n\Delta\varphi\geq\frac{1}{2} . Hence, similar to the position and momentum operators, the photon-number operator \hat{n}=\hat{a}^{\dagger}\hat{a} and phase operator \hat{\varphi} obey the the canonical commutation relation [\hat{n},\hat{\varphi}]=i ( Pegg and Barnett 1989 ; Barnett and Pegg 1989 ; Kozlovskii 2020 ) . Nevertheless, it is natural to consider whether a weak measurement proposal for the interaction of the type g\hat{A}\otimes\hat{n} , analogous to the original concept introduced by Aharonov et al., can be formulated. To address the first question, one can consider nonclassical meter states, as they can potentially enhance the precision of parameter estimation. Our answer to the second question is affirmative. To investigate the above two problems, we choose the single-photon-added coherent state (SPACS) as a meter. The SPACS is defined as (1+|\alpha|^{2})^{-\frac{1}{2}}\hat{a}^{\dagger}|\alpha\rangle , where \hat{a}^{\dagger} is the photon creation operator and |\alpha\rangle denotes a coherent state. The motivation for choosing SPACS as a meter is twofold: (i) although SPACS differs from the coherent state by only a single photon, its photon statistics differ significantly, exhibiting nonclassical behavior for small |\alpha| ; and (ii) results obtained with SPACS smoothly reduce to the coherent-state results in the limit |\alpha|\gg 1 . In this paper, we present a theoretical analysis of postselection measurement using the SPACS as a meter.