Closed-Loop Control and Disturbance Mitigation of an Underwater Multi-Segment Continuum Manipulator
Kyle L. Walker, Hsing-Yu Chen, Alix J. Partridge, Adam A. Stokes, Lucas Cruz da Silva, Francesco Giorgio-Serchi · 2025
Read Closed-Loop Control and Disturbance Mitigation of an Underwater Multi-Segment Continuum Manipulator by Kyle L. Walker, Hsing-Yu Chen, Alix J. Partridge, Adam A. Stokes, Lucas Cruz da Silva, Francesco Giorgio-Serchi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-12508.txt.
Introduction
Kyle Walker and co-authors steered a soft underwater arm against disturbances in two thousand twenty-five. Soft arms suit subsea inspection by conforming safely. Their floppy materials make control genuinely hard. State estimation from a floppy body is non-trivial. The prototype arm runs about a meter long. Its mechanical design is detailed openly.
Two controllers were built and tank-tested. One works in joint-style configuration space. The other aims directly in task space. Both parked the tip at target spots reliably. Errors stayed small under water disturbance. The analysis guides builders of inspection robots. Gentle contact with subsea structures is the payoff.
Catalog record
| CREATOR | Kyle L. Walker, Hsing-Yu Chen, Alix J. Partridge, Adam A. Stokes, Lucas Cruz da Silva, Francesco Giorgio-Serchi |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 26 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2503-12508
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Closed-Loop Control and Disturbance Mitigation of an Underwater Multi-Segment Continuum Manipulator Kyle L. Walker, Hsing-Yu Chen, Alix J. Partridge, Adam A. Stokes, Lucas Cruz da Silva, Francesco Giorgio-Serchi Abstract The use of soft and compliant manipulators in marine environments represents a promising paradigm shift for subsea inspection, with devices better suited to tasks owing to their ability to safely conform to items during contact. However, limitations driven by material characteristics often restrict the reach of such devices, with the complexity of obtaining state estimations making control non-trivial. Here, a detailed analysis of a 1m long compliant manipulator prototype for subsea inspection tasks is presented, including its mechanical design, state estimation technique, closed-loop control strategies, and experimental performance evaluation in underwater conditions. Results indicate that both the configuration-space and task-space controllers implemented are capable of positioning the end effector to desired locations, with deviations of < < 5% of the manipulator length spatially and to within 5 o of the desired configuration angles. The manipulator was also tested when subjected to various disturbances, such as loads of up to 300g and random point disturbances, and was proven to be able to limit displacement and restore the desired configuration. This work is a significant step towards the implementation of compliant manipulators in real-world subsea environments, proving their potential as an alternative to classical rigid-link designs. I Introduction As energy demands continue to rise across the globe [ 1 ] , so does the need for increased and well maintained infrastructure. As such, maintaining current pipelines is vital to ensuring demands are met [ 2 ] , while also reducing the impact to marine environments [ 3 ] . Due to the inaccessibility of subsea pipelines for engineers, robotic solutions have been developed for inspection, with ROVs being an established technology and a push in recent years towards AUVs [ 4 , 5 ] . A key benefit of such platforms is their ability to carry tailored sensor payloads to inspection sites, including imaging [ 6 ] , acoustic [ 7 ] and magnetic sensors [ 8 ] , providing a broad picture of the health of the inspected asset [ 9 ] . In addition, ROVs and AUVs provide a strong base for the addition of manipulators that can be used for both inspection and maintenance [ 10 ] . While traditional manipulators enable a wide range of additional abilities, for example intervention [ 11 ] or cleaning tasks [ 12 ] , this is typically met with a trade-off between weight and effective reach, restricting the use of specific devices to specific vehicles [ 10 ] . In turbulent environments, this can prevent contact-inspection and similar tasks using small-scale ROVs, as the length of manipulator the ROV can carry as a payload is fundamentally limited, thus the risk of the ROV inadvertently colliding with the structure increases [ 13 , 14 ] . Likewise, the lack of flexibility and compliance within the rigid links of the manipulator mean additional advanced control is necessary to avoid damage to the plant (or the vehicle) [ 12 , 15 ] ; on a floating base this complexity is exacerbated. Advances in the field of continuum and soft robotics have displayed potential for low weight to high length devices [ 16 ] , with the additional benefit of inherent structural compliance increasing resilience within dynamic subsea environments [ 17 ] . In contrast to typical rigid-link designs, soft manipulators (or manipulators exhibiting traits associated with soft robotics) are often pneumatically actuated [ 18 ] , a characteristic undesirable for underwater operation. Tendons are another common actuation method, but often designs are constrained to shorter length scales [ 19 , 20 ] and limited in terms of operation under payload [ 21 ] , due to their reduced load-bearing capacity as a product of their increased flexibility. Compliant manipulators have recently shown promise at achieving increased reach and load-bearing capabilities in terrestrial environments [ 22 ] , with some devices exploiting variable stiffness to grant manipulators benefits from both compliant and traditional devices [ 23 ] . However, for instances where larger length-scales have been achieved, motion is typically constrained [ 24 , 25 ] with a focus on a specific task/scenario [ 26 ] . This work focuses on these challenges, building on previous research into modular, tendon driven, variable stiffness compliant manipulators [ 27 ] . Significant advancements are demonstrated through closed-loop set-point regulation and disturbance compensation for deployment in realistic subsea environments (Fig. 1 ). The remainder of the paper is structured as follows: Section II details the mechanical design, sensor integration and kinematics of the manipulator; Section III details the control methods, including state estimation, closed-loop control and tension supervision; Section IV presents experimental setup and testing of the manipulator, encapsulating underwater configuration-space posture tracking, task-space end-effector tracking and disturbance compensation before giving concluding remarks. Fig. 1 : (a) Diagram of the assembled manipulator, showing: a TPU plug, secured at the bead centre for routing a 2mm diameter NiTi rod; TPU arches between beads; an IMU encapsulated in resin; compressible TPU hinges. Also, (b) an example of how neighbouring beads move in orthogonal planes and (c) the manipulator in operation underwater. II Design & Modelling II-A Mechanical Design The manipulator demonstrated here extends prior work into modular, tendon driven, variable stiffness manipulators [ 27 ] as follows: the manipulator length is increased \sim 2.5x and has an additional controllable segment; a method of state estimation is integrated; closed-loop control is validated experimentally. Furthermore, operation of the manipulator is proven in an underwater environment. The manipulator is fully modular and can be assembled to various lengths, with varying number of segments. For this work, a manipulator 1m in length with three independently controllable segments is presented. Modularity is achieved by utilising repeating pieces that slot together until a desired length is reached. In this design the modular pieces are as follows: PLA beads; compressible TPU hinges; TPU arches; TPU plugs; a 2mm diameter NiTi rod equal in length to the desired length of the manipulator. These pieces are presented in Fig. 1 . Each bead is 29.5mm in height, 62mm wide and weighs 10g, with 1 segment of the manipulator comprising 16 beads (15 regular beads and 1 with the addition of a holster for a waterproofed IMU). Another addition to the design is the inclusion of a 2mm diameter nitinol rod down the centre of the manipulator that acts as a sprung backbone. To hold the rod in place, TPU plugs with a central hole have been added to the centre of each bead that guide the rod, while allowing beads to compress and adding the potential for stiffening. Further advancing on [ 27 ] , beads slide over arched rails manufactured in TPU, that increase static friction between successive beads during tensile loading of the manipulator backbone. Successive beads rotate around respectively orthogonal axes, as shown in Fig. 1 (b). Each section of the manipulator is controlled by 4 tendons, with each tendon connecting via bowden cable to a single servo motor (Dynamixel, XM430-W350). The assembled manipulator in operation is displayed in Fig. 1 (c). Fig. 2 : Overview of the