The Sensitivity Limit of Rydberg Electrometry via Fisher-Information-Optimized Slope Detection

Chenrong Liu, Mingti Zhou, Chuang Li, Xiang Lv, Ying Dong, Bihu Lv · 2025

Read The Sensitivity Limit of Rydberg Electrometry via Fisher-Information-Optimized Slope Detection by Chenrong Liu, Mingti Zhou, Chuang Li, Xiang Lv, Ying Dong, Bihu Lv (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2503-12007.txt.

Introduction

Chen-Rong Liu and colleagues set the theoretical sensitivity limit for atom-based microwave sensors in a 2025 paper. Rydberg atoms, atoms puffed up to huge sizes, react strongly to microwaves and can measure electric fields with extreme delicacy. What the fundamental floor of that delicacy is, given photon shot noise and atomic response, had not been worked out in a full Fisher information framework.

Their framework derives Fisher information for slope detection and converts it into a sensitivity formula. With real cesium vapor parameters, the optimized sensitivity lands below a nanovolt per centimeter per root hertz, and stays there under moderate parameter changes. Experiments trail that floor mainly through technical noise, so the theory maps how much room remains to improve.

Catalog record

CREATORChenrong Liu, Mingti Zhou, Chuang Li, Xiang Lv, Ying Dong, Bihu Lv
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE65 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2503-12007

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The Sensitivity Limit of Rydberg Electrometry via Fisher-Information-Optimized Slope Detection Chenrong Liu, Mingti Zhou, Chuang Li, Xiang Lv, Ying Dong, Bihu Lv Abstract We present a comprehensive theoretical study of the Fisher information and sensitivity of a Rydberg-atom-based microwave-field electrometer within the framework of slope detection. Instead of focusing on the Autler-Townes (AT) splitting of the electromagnetically induced transparency (EIT) spectrum of the probe laser, we shift the analytical focus to the transmitted power response to the signal microwave to be measured. Through meticulous analysis of the signal-to-noise ratio (SNR) in transmitted light power, we naturally derive the desired sensitivity. Crucially, we demonstrate that laser-intrinsic noise, rather than the relaxation of the atomic system, predominantly governs the uncertainty in microwave measurement. Based on this, the Fisher information, which characterizes the precision limit of microwave measurement, is deduced. Considering only non-technical relaxation processes and excluding controllable technical relaxations, the optimal sensing conditions are numerically analyzed from the perspective of maximizing the Fisher information. The results reveal that the sensitivity of the electrometer under such conditions can reach sub- nV / ( cm ​ Hz ) \mathrm{nV}/(\mathrm{cm}\sqrt{\mathrm{Hz}}) . Our work provides a rigorous quantitative characterization of the performance of the Rydberg-atom-based microwave-field electrometer and presents an effective strategy for optimizing its performance. I Introduction In recent years, the utilization of Rydberg atoms for sensing microwave (MW) electric fields has garnered substantial attention due to their exceptional sensitivity to external electric fields Adams et al. 2019 ; Artusio-Glimpse et al. 2022 . The strength of the microwave electric field can be precisely determined by measuring the frequency separation of the Autler-Townes (AT) splitting within the electromagnetically induced transparency (EIT) spectrum Sedlacek et al. 2012 . Over the past decade, significant progress has been made in Rydberg-atom-based microwave electrometers that leverage the EIT-AT effect Sedlacek et al. 2012 ; Sedlacek et al. 2013 ; Holloway et al. 2014 ; Fan et al. 2015 ; Simons et al. 2019 ; Robinson et al. 2021 ; Hu et al. 2022 . However, the slope detection method Degen et al. 2017 , which is commonly used in quantum sensing, has not received the deserved recognition in this realm, in contrast to the EIT-AT effect sensing strategy. Figure 1: (Color online) Schematic diagram of the Rydberg-atom-based microwave-field electric sensing. The probe light enters the atom vapor cell from the left side and exits from the right side. The cell has a length of L . The initial power of the probe laser is P_{in} , and the transmitted power P_{tr} is used to reconstruct the EIT spectrum as a function of detuning \Delta_{c} . A horn feed microwave with Rabi frequency \Omega_{s} is introduced into the cell, resulting in EIT-AT splitting. The energy level setup can be seen in Table 1 . Slope detection in sensors focuses on the derivative of the directly measured variable with respect to the quantity of interest at a well-selected reference point Degen et al. 2017 . In this context, the response of the directly measured variable scales linearly with any infinitesimal variation in the quantity of interest. When applied to Rydberg-atom-based microwave field electrometers, this approach enables the detection of microwave fields that are orders of magnitude weaker than the reference local field Jing et al. 2020 . However, a quantitative performance description for this type of electrometer in slope detection remains elusive. Notably, Fisher information defines the theoretical upper limit of measurement precision in parameter estimation frameworks Braunstein and Caves 1994 ; Spehner and Orszag 2013 , providing a quantitative assessment of noise that facilitates the evaluation of the sensor’s potential performance and avenues for improvement Degen et al. 2017 . On one hand, conventional EIT-AT detection quantifies microwave fields via the Autler-Townes splitting interval \Delta_{\mathrm{AT}}\propto\Omega_{s} in the probe transmission spectrum Sedlacek et al. 2012 ; Artusio-Glimpse et al. 2022 . The measurement errors thus predominantly arise from the reconstruction of the EIT spectrum Sedlacek et al. 2012 , rather than probe laser noise. The EIT spectrum profile of the transmitted probe laser is influenced by various relaxation processes within the system, including decay relaxation processes such as spontaneous emission Steck 2024a and thermal radiation from the external environment Šibalić et al. 2017 ; and dephasing relaxation processes such as atom-atom collisions Omont 1977a , transit time Sagle et al. 1996 ; Fontaine 2020 , laser spectrum energy density with a certain linewidth Kumar et al. 2016 ; Otto et al. 2022 ; Finkelstein et al. 2023a , Doppler effect Fan 2015 ; Finkelstein et al. 2023a , and laser power broadening Steck 2024a . These processes broaden the EIT spectral width Fan et al. 2015 ; Steck 2024a , thus significantly reducing the minimal resolution of the EIT-AT splitting and rendering the sensitivity of EIT-AT effect-based detection highly susceptible to these relaxation mechanisms Fan et al. 2015 . On the other hand, slope detection focuses on the response of the transmitted probe laser to the microwave field at a well-selected reference point. Here, the EIT spectrum is not critical; instead, the probe laser’s response and its derivative with respect to the microwave field are the primary factors. This allows the measurement precision of the Rydberg-atom-based electrometer to approach the shot noise limit in principle, thereby achieving superior measurement performance. The signal-to-noise ratio (SNR) is a critical metric in both classical and quantum sensing, directly influencing measurement sensitivity and reliability. Defined as the ratio of signal power to noise power, the SNR serves as a measure of the quality of the microwave signal to be measured. In this study, we focus on slope detection and determine its measurement sensitivity for microwaves, bridging the relationship between SNR and Fisher information. Errors in microwave measurement propagate from errors in the transmitted probe laser power, while the aforementioned relaxation processes affect the attenuation of the transmitted probe laser power, as illustrated in Fig. ( 1 ). In this work, Fisher information in slope detection is estimated as the precision limit for measuring the microwave electric field strength. The SNR is defined in terms of the transmitted probe laser power, enabling straightforward calculation of sensitivity. The sensitivity limit thus can be obtained through the optimization of Fisher information, which covers the experimental results. While building upon M. Jing’s pioneering heterodyne scheme Jing et al. 2020 , our Fisher-information approach reveals previously unexplored optimization pathways. Finally, a numerical presentation of the Fisher information and sensitivity of the Rydberg-atom-based microwave-field electrometer with slope detection is carried out. The special case corresponding to zero temperature ( T\to 0 ) is also analytically investigated. Table 1: The collection of parameters setup in numerical computation for 133 Cs atoms (also see in Refs. Jing et al. 2020 and Appendix C ). Laser Atom Light-Atom \Omega_{0} 6.947 GHz \mathcal{N}_{0} 1 1 1 The temperature is setup in T=298.15\mathrm{K} (i.e., 25^{\circ} ), and atom number density can be calculated Steck 2024b 4.894\times 10^{16}\,\mathrm{m^{-3}} L 2 2 2 The length of the atom vapor cell 0.05\,\mathrm{m} \lambda_{p} 852\,\mathrm{nm} \mu_{21} 2.5817\,ea_{0} 3 3 3 The transition dipole matrix element of 133 Cs atom: \mu_{21} for transition 6\mathrm{S}_{1/2}(F=4)\to 6\mathrm{P}_{3/2}(F^{\prime}=5) , \mu_{32} for transition 6\mathrm{P}_{3/2}(F=5)\to 47\mathrm{D}_{5/2} , \mu_{43} for transition 47\mathrm{D}_{5/2}\to 48\mathrm{P}_{3/2} , in unit of

Read the complete text